Search Results

Turbulent jet ignition is a pre-chamber ignition enhancement method that produces a distributed ignition source through the use of a chemically active turbulent jet which can replace the spark plug in a conventional spark ignition engine. In this paper combustion visualization and characterization was performed for the combustion of a premixed propane/air mixture initiated by a pre-chamber turbulent jet ignition system with no auxiliary fuel injection, in a rapid compression machine. Three different single orifice nozzles with orifice diameters of 1.5 mm, 2 mm, and 3 mm were tested for the turbulent jet igniter pre-chamber over a range of air to fuel ratios. The performance of the turbulent jet ignition system based on nozzle orifice diameter was characterized by considering both the 0-10 % and the 10-90 % burn durations of the pressure rise due to combustion.

An experimental study is performed to investigate the possibility of relaxing the octane requirement of a Rotax 914 engine equipped with a pre-chamber jet ignition system. A pre-chamber jet igniter with no auxiliary fuel addition is designed to replace the spark plug in cylinder two of the test engine and is evaluated across engine speeds ranging from 2500 to 5500 RPM. Experiments are performed across both normally aspirated and boosted configurations using regular 87 AKI gasoline fuel. Normally aspirated results at 98 kPa manifold absolute pressure show a 7-10° burn rate improvement with the jet ignition combustion system. Tests to determine the maximum load at optimal combustion phasing (no spark retard) are then conducted by increasing boost pressure up to maximum knock limits.

The engines used to power small unmanned aerial systems are often modified commercial products designed for use by hobbyists on small model aircraft at low altitude. For military applications, it is desirable to fly at high altitudes. Maintaining power from the engine at the reduced ambient air pressures associated with high altitudes requires some method of increasing air delivery to the intake manifold. Conventional turbochargers and superchargers are typically very inefficient for the low mass flows associated with small engines. Due to its unique characteristics, a pressure wave supercharger (PWS) can avoid many scaling-related losses. This project designed a small-scale PWS for turbo-normalization of a Brison 95 cc two-stroke engine for a small unmanned aerial vehicle. A larger PWS called the Comprex®, designed by Brown Boveri Company, was simulated using a quasi-one-dimensional Computational Fluid Dynamics (CFD) code developed at the NASA Glenn Research Center.