Refine Your Search

Date

Date

Topic

Topic

Hybrid electric vehicles Commercial aircraft Trucks Data acquisition and handling Energy storage systems AGE-2 Air Cargo

Search Results

Viewing 1 to 20 of 20
1
Sort by relevance
Standard

Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface
2020-11-23
CURRENT
AIR1673B
Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.
Standard

Fire Containment Cover - Operation and Use
2020-04-23
CURRENT
ARP6905
This SAE Aerospace Recommended Practice (ARP) provides guidelines for the effective operation and use of fire containment covers (FCCs). Technical Standard Orders (TSOs) C203 and C90e (and later revisions) incorporate AS6453, and provide the Minimum Performance Standards (MPS) for an FCC design. The net and pallet used with the FCC must be approved using the updated net and flammability requirements in TSO C90e and later revisions. However, fire containment performance also requires this equipment is properly used. Fire safety is compromised when FCCs are used in an inadequate manner.
Standard

GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES
1984-10-01
HISTORICAL
ARP1334A
Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria.
Standard

GROUND EQUIPMENT REQUIREMENTS FOR COMPATIBILITY WITH AIRCRAFT UNIT LOAD DEVICES
1973-11-01
HISTORICAL
ARP1334
Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. a) These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. b) These devices usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural integrity.
Standard

Air Mode Active Containers Conditioning Performance
2010-11-15
CURRENT
ARP5741
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
Standard

Cargo Stopper Devices
2022-10-13
CURRENT
AS6554A
The purpose of this SAE Aerospace Standard (AS) is to standardize the basic design, performance, and testing requirements for “Cargo Stoppers” cargo tie-down accessories to be used in conjunction with approved restraint straps meeting AS5385C (TSO C-172) requirements.
Standard

Interline Air Cargo Pallet Nets
2023-01-13
CURRENT
AS1492C
This document establishes dimensional, structural, and environmental requirements for Type II/2 interline pallet nets. Type II/2 covers NAS3610/AS36100 code sizes.
Standard

Interline Air Cargo Pallets
2023-01-13
CURRENT
AS1491B
This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint systems and using pallet nets meeting the requirements of AS1492. Type II/2 covers NAS3610/AS36100 code sizes. Type III pallets have been removed from this SAE Aerospace Standard revision.
Standard

Vehicle Transport Unit Load Device (ULD)
2020-11-30
CURRENT
ARP1554D
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service. It is intended that tests shall be non-destructive in nature and not result in damage unless ultimate load conditions are employed. Test equipment and methods of testing described are not meant to be restrictive. Alternate equivalent methods to accomplish the desired results may be employed. In selected cases, tests may be repeated under ultimate load conditions when required for substantiation of analytical data. If this becomes necessary, the parts deformed may be removed and replaced prior to the retest.
Standard

Fire Containment Cover - Design, Performance, and Testing Requirements
2021-12-13
CURRENT
AS6453A
This SAE Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of fire containment covers (FCCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

Crew Rest Container for Main Deck or Lower Deck
2007-01-12
HISTORICAL
ARP4769A
This document provides information about regulations and gives recommendation for the design of ULD - type main deck and lower deck mobile crew rest containers to be transported in aircraft equipped with a Class II restraint system as defined by NAS 3610.
Standard

CREW REST CONTAINER FOR MAIN DECK OR LOWER DECK
1994-06-01
HISTORICAL
ARP4769
This document provides information about regulations and gives recommendation for the design of ULD - type main deck and lower deck mobile crew rest containers to be transported in aircraft equipped with a Class II restraint system as defined by NAS 3610.
Standard

Air Cargo Unit Load Devices - Performance Requirements and Test Parameters
2020-09-29
CURRENT
AS36100C
This SAE Aerospace Standard (AS) defines the minimum performance requirements and test parameters for air cargo unit load devices requiring approval of airworthiness for installation in an approved aircraft cargo compartment and restraint system that complies with the cargo restraint requirements of Title 14 CFR Part 25, except for the 9.0-g forward ultimate inertia force of § 25.561 (b)(3)(ii).
Standard

Cargo Restraint Straps - Design Criteria and Testing Methods
2000-09-01
HISTORICAL
AS5385
This Standard aims at identifying the design criteria and testing methods adequate to guarantee the ultimate load and operational dependability of cargo restraint strap assemblies with a typical 22 250 N (5,000 lbf) rated ultimate tension load capability, as used by the airline industry in order to restrain on board civil transport aircraft during flight: a cargo loaded and tied down onto airworthiness certified air cargo pallets, themselves restrained into aircraft lower deck or main deck cargo systems meeting the requirements of NAS 3610, or b non-unitized individual pieces of cargo, or pieces of cargo placed onto an unrestrained (“floating”) pallet into either lower deck or main deck containerized cargo compartments of an aircraft.
Standard

Fire Resistant Container Design, Performance, and Testing Requirements
2020-10-27
CURRENT
AS8992
This Aerospace Standard (AS) specifies the minimum design and performance criteria and testing methods of passive fire resistant containers (FRCs) used either: a In those cargo compartments of civil transport aircraft where they constitute one means of complying with applicable airworthiness regulations, or b On a voluntary basis, when deemed appropriate by operators to improve fire protection in aircraft cargo compartments where airworthiness regulations do not mandate their use.
Standard

Aircraft Engine Transport Devices
2000-01-01
HISTORICAL
ARP1840A
The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.
1
X