Refine Your Search

Date

Date

Topic

Topic

Fuel tanks Protective systems Occupant protection MTC4, Forestry and Logging Equipment

Search Results

Viewing 1 to 19 of 19
1
Sort by relevance
Standard

Operator Protective Structure Performance Criteria for Certain Forestry Equipment
2008-04-21
CURRENT
J1084_200804
This SAE Recommended Practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees. Structures meeting these performance criteria may not provide complete operator protection under all conceivable circumstances, but they are expected to minimize the possibility of operator injury under reasonable operating situations. The performance requirements and test criteria included in this document are derived from investigations on operator protection that has performed the intended function in a variety of actual operating conditions. Objective This document is intended to establish a consistent, repeatable means of evaluating Operator Protective Structures (OPS) on Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees.
Standard

COMPONENT NOMENCLATURE–ARTICULATED LOG SKIDDER, RUBBER–TIRED
1975-05-01
HISTORICAL
J1109_197505
This standard includes names of major components and parts particular to this type of machine. Illustrations used here are not intended to include all existing commercial vehicles, or to be exactly descriptive of any particular machine. They have been chosen to describe the principles to be used in applying this standard.
Standard

SPECIFICATION DEFINITIONS—ARTICULATED RUBBER-TIRED FORWARDER
1991-06-01
HISTORICAL
J1823_199106
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe articulated rubber-tired forwarders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer.
Standard

Swing Performance And Rating Procedure, Material Handlers, Knuckle Boom Log Loaders And Certain Forestry Equipment
1998-06-01
HISTORICAL
J2393_199806
This SAE Standard describes a uniform method to calculate and specify swing performance characteristics of material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to knuckle boom log loaders as defined in SAE J1209 and SAE J2055 and to certain forestry equipment defined in SAE J1209 and ISO 6814 that have rotating upper-structures such as feller bunchers, harvesters, processors, and forwarders. Included in the definition of knuckle boom log loaders are behind the cab and rear-mounted log loaders not having their own power supply.
Standard

Specification Definitions - Clam Bunk Skidder
2013-02-11
CURRENT
J1824_201302
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe high-speed steel track and articulated rubber-tired clam bunk skidders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment
2004-03-18
HISTORICAL
J2417_200403
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment
1998-06-01
HISTORICAL
J2417_199806
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment
2009-08-31
HISTORICAL
J2417_200908
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment
2014-10-21
HISTORICAL
J2417_201410
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in ISO 6814 and ISO 17591 and certain forestry equipment defined in ISO 6814 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
1
X