Search Results

Develop an AS for the minimum performance requirements for tracking devices that are utilized to track the location and other environmental conditions of a piece of equipment that will be transported on-board an aircraft, .i.e ULD, TCC, FRC. The AS will define test requirements or regulation that a device will need to meet to demonstrate no impact to its use on-board an aircraft operation and its crew. The goal would be to request a TSO be developed based on this new standard.

Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.

Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This Aerospace Information Report has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.

Manufacturers/designers of all aircraft equipped with a pallet/container capability have provided a means of linking the ground loaders/elevators with the aircraft sill for the smoother transfer of pallets and containers into or out of the aircraft holds. Use of the aircraft attachment points may be used as a means of averting damage to the aircraft door frames and other important parts. Latch-on guarantees fore and aft and vertical alignment of the loader bed with the aircraft doorway, when used in conjunction with the appropriate ground equipment. This SAE Aerospace Information Report (AIR) has been prepared by SAE Subcommittee AGE-2A to present a review of the current range of aircraft attachment points on wide body aircraft and those narrow body aircraft with a ULD cargo capability. Airline operators, who utilized these facilities, have been faced with a growing number of adaptor bars necessary to suit each type of aircraft and door position.

Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria.

Included in this document are requirements for conveyor systems, guides, stops, restraint hardware that are used on trucks, transporters, dollies, storage provisions, pallet build-up hoists, or other device-handling equipment. a) These requirements reflect state of the art criteria applied to known successfully operated hardware. Any design deviations shall be required to demonstrate equivalency to this specification criteria. b) These devices usually form an integral part of the aircraft and as such are subject to regulatory agencies' requirements to assure structural integrity.

This SAE Aerospace Recommended Practice (ARP) specifies requirements for those portions of the aircraft Unit Load Device ground and terminal handling equipment that will have a direct bearing on the life of the ULD for the purpose of preventing undue wear on the ULD. Past experience has shown that in-service defects in regard to the above equipment cause high ULD cost. Greater control of maintenance is required.

This SAE Aerospace Recommended Practice (ARP) specifies requirements for those portions of the aircraft Unit Load Device ground and terminal handling equipment that will have a direct bearing on the life of the ULD for the purpose of preventing undue wear on the ULD. Past experience has shown that in-service defects in regard to the above equipment cause high ULD cost. Greater control of maintenance is required.

The requirements of this SAE Aerospace Recommended Practice (ARP) are applicable to ground handling and transport systems equipment which is designated to accommodate main deck unitized cargo in the form of intermodal containers and other compatible unitized load devices. Intermodality in the context of this document concerns primarily air and land modes but does not exclude the marine mode. Equipment with compatibility features for other than main deck cargo is likewise not excluded. It is not the intent of this document to specify equipment design but rather to ensure interface compatibility of the various elements which might make up a total ground handling and transport system developed within a number of different operational schemes. It is the intent of this document to specify minimum ULD handling and restraint features to ensure future interchange capability.

This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification.

This AS covers the requirements for three sizes of compartment restrained lower deck containers (Unit Load Devices) for the 767 airplane and which do not require airworthiness certification. NOTE: IATA Specificaton 50/0, General Technical Requirements and Serviceability limits, should also be taken into account when designing and making equipment according to this Specification as certain provisions contained therein will also be applicable.

The present SAE Aerospace Information Report (AIR) provides a list of the main government regulations, SAE and international standards, and standing industry recommendations applying to air cargo unit load devices (pallets, nets, and containers) to be loaded with either baggage or freight on board civil transport aircraft. It is intended to provide unit load devices designers, purchasers, and operators as well as civil transport aircraft and aircraft cargo systems designers within the industry with a list of the available document references to cover the other aspects that do not all directly pertain to airworthiness and testing, listed in 1.1 of AS36100, – Air Cargo Unit Load Devices - Performance Requirements and Test Parameters [TSO-C90].

This SAE Aerospace Information Report (AIR) covers information relative to ULDs (Unit Load Devices) container and pallet configurations, maximum usable container, pallet and bulk compartment volumes and tare weights for the lower deck of various wide-body aircraft. Bulk compartment volumes are also included for standard-body aircraft.

This SAE Aerospace Standard specifies the dimensional, design criteria, fabrication, performance, operational, environmental, and testing requirements for interline pallets requiring airworthiness approval for loading onto civil transport aircraft equipped with NAS3610/AS36100 restraint systems and using pallet nets meeting the requirements of AS1492. Type II/2 covers NAS3610/AS36100 code sizes. Type III pallets have been removed from this SAE Aerospace Standard revision.

The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.

The tests are static in nature to minimize complexity and cost of required testing facilities. As far as practical, applied static loads should take into account the combined static and dynamic loads anticipated in service.

This SAE Aerospace Standard (AS) details the design of fork pockets on containers and equipment for use with pallet lift trucks and forklift trucks.

This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.