This Aerospace Recommended Practice will identify the problem with latency in the pilot's instrument control of an aircraft. Recommended evaluation techniques to characterize control problems will be documented.
This document recommends criteria for the design and installation of Head-Up Display (HUD) systems. The recommendations are applicable to HUD systems which display flight information focused at infinity in the forward field of view. This annex does not address devices for peripheral vision or displays worn by the pilot (goggles, helmet sights).
This Aerospace Recommended Practice (ARP) is intended to specify the environmental conditions necessary to permit the operating crew of large civil transport aircraft to perform their required duties and functions in comfort, with minimum fatigue and no distraction. Environmental conditions should cause no short or long-term effects deleterious to health or physical well being, nor significantly impair ability to perform normal flight deck crew functions.
This document recommends criteria for the flight deck display of an On Board Weight and Balance System. The system may have the capability of a primary operational device or be a secondary advisory source of information of weight and center of gravity position. The recommendations apply to transport aircraft and describe the operational and functional requirements for the display of an On Board Weight and Balance System.
This document recommends criteria and requirements for a flight management system (FMS) for transport aircraft. The FMS shall provide the functions of lateral navigation, vertical navigation, and performance management and may include time of arrival control. The FMS design shall take human factors considerations into account to produce a fault tolerant system.
The information contained in this document is based on line experience with current systems. It should be used as a basis for ongoing research and development including the human factors aspects of future flight management systems and their interaction with the ATC environment.
This anex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflfight, Autothrottle, or Autothrust performance is compatible.
This annex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflight, Autothrottle, or Autothrust performance is compatible.
This document specifies the requirements for the design objectives for handling qualities applicable to transport aircraft operating in the subsonic, transonic, and supersonic speed range. These objectives are not necessarily applicable to rotor or VTOL aircraft.
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics and functional requirements. The recommendations of the document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems and avoidance/detection systems.
This document specifies requirements for an Airborne Landing Guidance System (ALGS) electronic device. This equipment shall derive relative aircraft position and situation information for flight along precision three-dimensional paths within the appropriate coverage area. The precision three-dimensional path may be an ILS straight-in look-alike path or a complex, curved path. The requirements are applicable to electronic devices capable of receiving signals or other information from one or more sources, including but not limited to ILS, MLS, GNSS, or IRU inputs.
This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.
This document recommends general specifications for the location, accessibility and restraint for those items of survival, emergency, and miscellaneous equipment which are intended to be used by the flight crew, and which are stowed on or near the flight deck.
This document recommends general specifications for the location, accessibility and restraint for those items of survival, emergency, and miscellaneous equipment which are intended to be used by the flight crew, and which are stowed on or near the flight deck.