Search Results

Standard

Sponge and Expanded Cellular Rubber Products1

2000-12-01

HISTORICAL

J18_200012

Except as otherwise specified in these methods, the following ASTM test methods and the various test methods in Table 3, applicable in general to vulcanized rubber, shall be complied with as required and are hereby made a part of these methods:

Standard

Sponge and Expanded Cellular Rubber Products1

2002-04-19

HISTORICAL

J18_200204

Except as otherwise specified in these methods, the following ASTM test methods and the various test methods in Table 3, applicable in general to vulcanized rubber, shall be complied with as required and are hereby made a part of these methods:

Standard

MARKING OF RUBBER PARTS

1997-04-01

HISTORICAL

J2332_199704

This SAE Recommended Practice provides a system for marking thermoset rubber parts to designate the general type of material from which the part was fabricated.

Standard

Standard Reference Elastomers (SREs) for Characterizing the Effect of Liquids on Vulcanized Rubbers

2023-05-10

CURRENT

J2643_202305

This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The appendices contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.

Standard

Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers

2004-08-10

HISTORICAL

J2643_200408

This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The annexes contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.

Standard

Standard Reference Elastomers (SRE) for Characterizing the Effect of Liquids on Vulcanized Rubbers

2013-12-17

HISTORICAL

J2643_201312

This SAE Standard specifies requirements for vulcanized rubbers in sheet form for use as standards in characterizing the effect of test liquids and service fluids. The annexes contain the standard reference elastomer formulas. The property changes of the SRE in contact with the indicated fluid under specified test conditions are the responsibility of the user. See 7.3 and Table 1. This standard is not designed to provide formulations of elastomeric product compositions for actual service.

Standard

Classification System for Thermoplastic Elastomers

2002-04-04

HISTORICAL

J2558_200204

This SAE Standard provides a system for specifying significant material properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.

Standard

Classification System for Thermoplastic Elastomers

2023-03-01

CURRENT

J2558_202303

This SAE Standard provides a system for specifying significant material properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications. In all cases where provisions of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence. This classification is based on SI units.

Standard

Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers

2010-09-21

HISTORICAL

J2236_201009

This method is intended to define the continuous upper temperature resistance (CUTR) of thermoplastic elastomers and thermoset rubber with durometer hardness <=90 Shore A, to oxidation or other degradation when exposed solely to hot air for an extended period of time.

Standard

Standard Method for Determining Continuous Upper Temperature Resistance of Elastomers

1999-05-01

HISTORICAL

J2236_199905

This method is intended to define the continuous upper temperature resistance (CUTR) of thermoplastic elastomers and thermoset rubber with durometer hardness ≤90 Shore A, to oxidation or other degradation when exposed solely to hot air for an extended period of time.

Standard

STANDARD METHOD FOR DETERMINING CONTINUOUS UPPER TEMPERATURE RESISTANCE OF ELASTOMERS

1992-06-01

HISTORICAL

J2236_199206

This method is intended to define the continuous upper temperature resistance (CUTR) of thermoplastic elastomers and thermoset rubber with durometer hardness ≤90 Shore A, to oxidation or other degradation when exposed solely to hot air for an extended period of time.

Standard

CLASSIFICATION SYSTEM FOR RUBBER MATERIALS FOR AUTOMOTIVE APPLICATIONS

1984-01-01

HISTORICAL

J200_198401

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. Note 1—This classification system may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used.

Standard

CLASSIFICATION SYSTEM FOR RUBBER MATERIALS FOR AUTOMOTIVE APPLICATIONS

1986-06-01

HISTORICAL

J200_198606

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. NOTE 1--This classification system may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used.

Standard

CLASSIFICATION SYSTEM FOR RUBBER MATERIALS FOR AUTOMOTIVE APPLICATIONS

1982-06-01

HISTORICAL

J200_198206

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. Note 1—This classification system may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used.

Standard

CLASSIFICATION SYSTEM FOR RUBBER MATERIALS FOR AUTOMOTIVE APPLICATIONS

1985-05-01

HISTORICAL

J200_198505

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. Note 1—This classification system may serve many of the needs of other industries in much the same manner as SAE numbered steels. It must be remembered, however, that this system is subject to revision when required by automotive needs. It is recommended that the latest revision always be used.

Standard

Classification System for Rubber Materials

2005-01-13

HISTORICAL

J200_200501

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.

Standard

Classification System for Rubber Materials

2006-11-01

HISTORICAL

J200_200611

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.

Standard

Classification System for Rubber Materials

2001-12-10

HISTORICAL

J200_200112

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.

Standard

Classification System for Rubber Materials

2003-11-13

HISTORICAL

J200_200311

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications.

Standard

CLASSIFICATION SYSTEM FOR RUBBER MATERIALS

1998-03-01

HISTORICAL

J200_199803

This classification system tabulates the properties of vulcanized rubber materials (natural rubber, reclaimed rubber, synthetic rubbers, alone or in combination) that are intended for, but not limited to, use in rubber products for automotive applications. This document is based on the premise that all rubber materials intended for use in rubber products can be arranged into characteristic designations. These designations are determined by types, based on resistance to heat aging, and classes, based on resistance to swelling by oil. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the quality of all rubber materials. In all cases where provisions of this document would conflict with those of the detailed specifications for a particular product, the latter shall take precedence.