Search Results

Gearing load spectra data collected under actual working conditions help a designer predict the fatigue life of power train components. Considerable time was required in the past to collect and reduce these data to a form suitable for design use. A vehicle mounted instrumentation system consisting of a strain gaged shaft, a shaft encoder-slip ring assembly, and an amplitude distribution analyzer, was developed which performs load measurements. At the test's conclusion, it provides a spectrum analysis in printed histogram form.

THIS paper presents results which will answer many of the problems facing an engine manufacturer in the selection of the most suitable types and sizes of superchargers to use with a line of engines. Although performance curves of production model diesels are available, decisions are still needed in choosing peak supercharging pressures, drive means, and size and effectiveness of intercoolers, if any. The author describes the use of a typical model to determine response to variation in intake and exhaust conditions, resulting in data which will assist in evaluating engine potentials with any system of supercharging. Thus, supercharger selection for a particular line of engines is aided by knowledge of engine characteristics as a second-stage compressor.

SETTING ratings for diesel engines takes laboratory testing and field experience for critical parameters such as smoke, piston temperature, and exhaust temperature. Rating is based upon theoretical considerations, plus the approval of the engine itself. Factors in rating considerations include a knowledge of the application of the engine, and whether its use is to be intermittent or continuous. Ratings by the manufacturer are not always accepted by the engine user, however. The user will run the engine at the load most profitable for him, which may be above or below that recommended by the manufacturer.

Advance in earthmoving technology has made necessary a corresponding advance in cutting edge technology. In adopting the concepts of matching the cutting edge to the machine, or possibly the job requirements of the machine, in rare instances it is found that the cutting edges employed in the 1930's and 1940's are satisfactory; however, in general, the increase in horsepower and carrying capacity of earthmoving machinery has necessitated a vast increase in the strength and wear properties of the cutting edge. The development of these properties, based on academic, laboratory, and field precepts, has advanced hand-in-hand with machine developments.

A new friction welding process, Caterpillar Inertia Welding, is described in this paper. The two distinguishing characteristics of this form of welding are a continuously decreasing rotational velocity and a continuously changing torque at the weld interface. This enables the forging of many previously “difficult-to-weld” materials, such as superalloys. Such welds also exhibit excellent fatigue properties. Because this process produces high strength bonds in dissimilar materials, the designer is able to create composite parts using the special properties of each material in response to the needs of the design.

A single-shaft, simple-cycle gas turbine engine has been developed to power 200 kw alternators for standby power and for applications where heat is needed. The engine was designed to be sold and serviced by distributors of earthmoving and industrial machinery. Where feasible, design practices of industrial piston engine powered generator sets were incorporated to facilitate installations of combinations of engine types, and to limit novel and unfamiliar features of the basic turbine engine to those that were considered essential. Individual components and complete engines, initially developed by a research group, have been subjected to a wide variety of laboratory tests to measure performance and develop reliability.

Two high specific output diesel engines designed for the Military -- the LVDS-1100 and LDS-750 engines, which are of V-8 and 5-cyl in-line configuration, respectively -- were developed by Caterpillar Tractor Co. under contract with U.S. Army Tank Automotive Center at Detroit Arsenal. This paper covers the development work, also sponsored by ATAC, required to adapt these engines for operation using regular grade gasoline in addition to the diesel and CIE fuels for which they were originally designed. Test techniques used, a description of some interesting combustion systems tried, and data obtained with the selected arrangement are included. The engine has excellent performance and starting characteristics with any of the three fuels.

A very high output (VHO), compression ignition engine family has been designed for the Military by Caterpillar Tractor Co., under contract with the U.S. Army Tank-Automotive Center, Detroit Arsenal. The engines in this family have maximum parts interchangeability and feature a multifuel combustion system. The first model, the LVMS1050, has been built and tested. This engine develops 960 bhp, weighs 2.5 lb per hp, and produces 29.5 hp per cu ft of volume. This paper discusses the family design and LVMS1050 development.

Inertia welding is a friction welding process using energy stored in a rotating mass as the source of heat and mechanical work. The process has been described in previous publications. The state of development of this manufacturing process, with respect to complexity of design and dissimilar metal welding, is the subject of this article. The successful applications of inertia welding now in production establish the utility of this versatile process while current developments portray exciting future possibilities.

Diesel engine exhaust emission characteristics vary considerably with the overall design of the combustion and fuel injection systems. Emission measurements were made on total hydrocarbons, nitrogen oxides, carbon monoxide, carbon dioxide, and smoke. The hydrocarbon measurements of the precombustion chamber engine are considerably lower than the direct injection engine. Less than five pounds of total hydrocarbons per 1000 gal of fuel are produced at rated conditions by all precombustion chamber engines studied. Precombustion chamber engines produce smaller quantities of the oxides of nitrogen when compared to direct injection engines. All diesels produced low carbon monoxide emissions. A novel technique for qualitative and quantitative evaluation of diesel exhaust odors is introduced. Exhaust odor intensity from the precombustion chamber engine is much less than that from the direct injection engine.

The Cushion Hitch is a unique application of vibration absorber theory to a self-propelled tractor-scraper. The scraper mass is utilized as a damper for suppressing predominate bouncing motions of the tractor unit. A more comfortable and safer operator ride, with increased productivity, results from the Cushion Hitch application. This paper describes development of the early prototype design as well as the final production version. Particular emphasis is given to both the hydraulic and the structural characteristics of the system.

A new 2-ring piston package has been developed which has proven successful in internal combustion engines. The need for a compact piston arrangement is discussed along with the steps followed to arrive at excellent oil economy. The paper presents other advantages related to cost savings, lower wear, and reduced engine friction. The paper discusses applications of the compact piston package along with its advantages in designing compact engines.

A cooperative research program has been completed evaluating the impact of fuel composition (volatility, aromatics and sulfur) on the combustion and emissions performance of a Caterpillar 3406B turbo-charged diesel engine, which is representative of diesel truck engines of the late 1980s. Tests included both steady-state and transient operation measuring regulated and unregulated emissions. The fuel set was blended using only commercially available refinery stocks typical of those which could be considered for use in distillate fuel. The compositions of the blends were selected so that direct measurements of the individual effects of 10% and 90% distillation temperatures, aromatic content, and sulfur content could be made independently. Engine combustion performance data indicated that all fuels operated satisfactorily; aromatic content was as high as 50% and cetane number as low as 39. Further, the cetane number did not predict the engine measured ignition delay in this program.