Search Results

Due to engine oil consumption, over 90% of the incombustibles in the diesel particulate filters (DPF) are derived from organometallic lubricant additives. These components are derived from calcium and magnesium detergents, zinc dithiophosphates (ZnDTP) and metal-containing oxidation inhibitors. They do not regenerate as they are non-volatile metals and salts. Consequently, the DPF has to be removed from the vehicle for cleaning. Ashless oil could eliminate the need for cleaning. This study initially focused on development of an ashless oil, but eventually concluded that this oil could not meet the valve-train wear requirements of the API CJ-4, SN/ACEA E9 oil categories. However, a zero-phosphorus oil with no ZnDTP and an extremely low sulfated ash of 0.4% demonstrated that it could meet critical engine tests in API CJ-4/ACEA/SN. The above oil, which has been optimized at 0.3% sulfated ash, has proven field performance in Cummins ISX with DPF using ultra low sulfur diesel (ULSD).

By 2014, all new on- and off-highway diesel engines in North America, Europe and Japan will employ diesel particulate filters (DPF) in the exhaust in order to meet particulate emission standards. If the pressure across the DPF increases due to incombustibles remaining after filter regeneration, the exhaust backpressure will increase, and this in turn reduces fuel economy and engine power, and increases emissions. Due to engine oil consumption, over 90% of the incombustibles in the DPF are derived from inorganic lubricant additives. These components are derived from calcium and magnesium detergents, zinc dithiophosphates (ZnDTP) and metal-containing oxidation inhibitors. They do not regenerate as they are non-volatile metals and salts. Consequently, the DPF has to be removed from the vehicle for cleaning. Ashless oil could eliminate the need for cleaning.

More stringent emission legislation has been a driver for changes in the design of Heavy Duty Diesel engines since the 1980s. Significant gains have been made over the years but, in 2007 and again in 2010, diesel engines in North America will have to meet even more stringent requirements for particulate matter and nitrogen oxide emissions. A reduction of the sulfur level in diesel fuel to a maximum of 15 mg/kg has been mandated as an enabler for new diesel engine exhaust gas after-treatment systems. Many studies have been published on the impact of the use of low sulfur diesel fuel. The focus of most of these studies has been on the possible impact on exhaust gas after-treatment system durability, but little has been documented on lubricant degradation and on the long term impact on engine durability. The objectives of the field test discussed in this paper were to evaluate the impact of low sulfur fuel and of a reduction in the TBN of the lubricant on lubricant degradation.