Search Results

The research described examines the relationship between damage/repair scenarios and the resulting effect on the coupled response of the structure. The monocoque is simplified as a box beam and damage is simulated by introducing a hole in one side of the tube. Repair is simulated by adding plies to an undamaged area of the beam side. Composite beam samples were manufactured and tested using a 3-axis coordinate measurement machine (CMM), to experimentally verify the computer numerical predictions of the deformed shape. The beams were loaded with a combined torsion-bending load using an eccentric tip load and rigidly fixing the opposite end. Structural coupling was observed by computing the distortion center of the beam profile at cross-sections along its length and comparing the results to the undamaged/unrepaired beam. The experimental results correlate well with the finite element simulations and generally follow the predictions of the analytical model.

Motorsport Engineering is developing a foothold, around the World, as a field of academic preparation at the post-graduate level. To gain the appropriate practical skills to augment classroom education, and thus, for the graduates to successfully compete for employment in the Motorsport Industry, it is critical that the degree program has a strong experiential component. This paper describes the need to take an engineering approach to motorsport education by combining a discovery-based education with the traditional lecture format to realize synergistic results. The idea is that to effectively “engineer” the graduate, the student must have a strong skill set or a strong grasp of the fundamentals. The growth of the current educational program at Colorado State University and the effectiveness of merging the “inside-out” process, typical of the research mission, with the instructional practices of the University and with the needs of the Motorsport Industry are discussed.

A study is presented in which light-weight composite materials are used for an engine intake valve. This paper is an interim progress report and documents the successful demonstration of a net-shape, resin transfer molded intake valve in a running engine. A short review of a previous dynamic model is presented showing the advantages in engine performance by using the composite valves. It is shown that the use of reduced mass composite valves allows for increased engine speed and/or more aggressive cam profiles without sacrificing valve strength or stiffness while at the same time maintaining reliable operation. The use of composite materials allows for a significant weight reduction compared to more conventional materials such as steel and titanium. A brief review of the use of composite materials is presented. The development and design process for carbon fiber reinforced valves is discussed.

Internal combustion engine poppet valves operate in extreme conditions. These extreme conditions are a result of the high temperatures in the combustion chamber. Especially in Motorsport applications, the high temperatures have led to the development of exotic metallic alloys that can operate in this environment. One key problem in developing materials for poppet valves is that it is necessary to know the temperature at which they operate. This is increasingly important when developing valves from alternative materials such as fiber reinforced composites. Composite engine valves have the potential to produce substantial increases in engine performance, through substantial weight reductions, if they can be designed to withstand the environment. Research to-date has demonstrated the functionality of fiber reinforced composite intake valves that are significantly lighter than metallic valves; however, composite valve surface temperatures seem higher than expected.

Fiber reinforced, shape memory, polymer matrix, composites have recently been demonstrated in a variety of applications. Once cured, these composites, based on thermoset shape memory resins, have the ability to be semi-permanently deformed from the cured shape at elevated temperatures and then subsequently returned to the original shape. However, the vast majority of the applications demonstrated have made use of very thin composite laminates. The current research considers composite sandwich panel structures formed from shape memory composite facesheets and a rigid foam core created from shape memory resin. The goal is to investigate the potential deformability in these much more rigid geometries to assess the potential for use in conformable, structural applications.

A number of racing series have seen an influx of motorcycle engines as basic powerplants which incorporate a performance oriented sequential shift transmission. However, due to common placement of the engine behind the driver, shift actuation can often become a difficult design issue. Further, the time of one up-shift can be 500 ms or more when the clutch is used, and manually unloading the transmission to allow shifting does not substantially reduce the time lost. A lightweight, low cost electronic liftless shift system has been designed to overcome the problems of packaging and improve shift speed. The system uses a small 12v DC gearmotor, cam and follower to execute the up-shift and downshift, and a current sensor and programmable IC's are used to automatically unload the drivetrain for liftless up-shifts.

A current general need within Six Sigma methodologies is to utilize statistical methods including experimental design in the confirmation of new processes and their parameters. This is typically done in the improve step of the DMAIC process. This need is even more evident in microjoining (small scale resistance welding) due to the number and complexity of the process variables. This paper outlines the improve step of a Six Sigma project in which statistical methods are applied to a microjoining process. These statistical methods include linear experimental design, regression analysis with linear transformation and mathematical modeling. The paper documents the methodology used to establish process parameters in microjoining of an electrical lead frame design.

Quality issues in magnet wire stripping and soldering have led to continuous improvement efforts in ignition coil manufacturing using Six Sigma methodologies. This effort has resulted in the investigation of an alternative product and process design, microjoining. This paper describes the continuation of development occurring during the improvement phase of a Six Sigma project. The confirmation of the results is accomplished through the use of experimental design, response surface methodologies, mathematical modeling and optimization of the process. Nonlinear design of experiments have been used to confirm a breakthrough microjoining process developed that is an alternative to soldering. The statistical methods used to develop the process build on the current documented research efforts.

Concerns with stripping and soldering copper magnet wire in ignition coils and other related products have led to the investigation of an alternative product and process design, microjoining. This paper describes the initial development occurring during the improvement phase of a Six Sigma project. The use of microjoining with a folded over welding tab terminal design coupled with a parallel gap welding process is developed as a suitable method for joining a tin plated brass terminals to the 0.65mm magnet wire without prior removal of the polyesterimide over-coated polyamideimide insulation.

Optimal energy management of hybrid electric vehicles has previously been shown to increase fuel economy (FE) by approximately 20% thus reducing dependence on foreign oil, reducing greenhouse gas (GHG) emissions, and reducing Carbon Monoxide (CO) and Mono Nitrogen Oxide (NOx) emissions. This demonstrated FE increase is a critical technology to be implemented in the real world as Hybrid Electric Vehicles (HEVs) rise in production and consumer popularity. This review identifies two research gaps preventing optimal energy management of hybrid electric vehicles from being implemented in the real world: sensor and signal technology and prediction scope and error impacts. Sensor and signal technology is required for the vehicle to understand and respond to its environment; information such as chosen route, speed limit, stop light locations, traffic, and weather needs to be communicated to the vehicle.

Previous research has demonstrated an increase in Fuel Economy (FE) using an optimal controller based on limited foreknowledge using methods such as Engine Equivalent Minimization Strategy (ECMS) and Stochastic Dynamic Programming (SDP) with stochastic error in the prediction signal considerations. This study seeks to quantify the sensitivity of prediction-derived vehicle FE improvements to prediction signal quality assuming optimal control. In this research, a hill pattern and route type identification scenario control subjected to varying prediction signal quality is selected for in depth study. This paper describes the development of a baseline Toyota Prius Hybrid Vehicle (HV) simulation models, real world drive cycles and real-world disturbances, and an optimal controller incorporating a prediction of vehicle power requirements.

The EcoCAR3 competition challenges student teams to redesign a 2016 Chevrolet Camaro to reduce environmental impacts and increase energy efficiency while maintaining performance and safety that consumers expect from a Camaro. Energy management of the new hybrid powertrain is an integral component of the overall efficiency of the car and is a prime focus of Colorado State University’s (CSU) Vehicle Innovation Team. Previous research has shown that error-less predictions about future driving characteristics can be used to more efficiently manage hybrid powertrains. In this study, a novel, real-world implementable energy management strategy is investigated for use in the EcoCAR3 Hybrid Camaro. This strategy uses a Nonlinear Autoregressive Artificial Neural Network with Exogenous inputs (NARX Artificial Neural Network) trained with real-world driving data from a selected drive cycle to predict future vehicle speeds along that drive cycle.

Transportation vehicle and network system efficiency can be defined in two ways: 1) reduction of travel times across all the vehicles in the system, and 2) reduction in total energy consumed by all the vehicles in the system. The mechanisms to realize these efficiencies are treated as independent (i.e., vehicle and network domains) and, when combined, they have not been adequately studied to date. This research aims to integrate previously developed and published research on Predictive Optimal Energy Management Strategies (POEMS) and Intelligent Traffic Systems (ITS), to address the need for quantifying improvement in system efficiency resulting from simultaneous vehicle and network optimization. POEMS and ITS are partially independent methods which do not require each other to function but whose individual effectiveness may be affected by the presence of the other. In order to evaluate the system level efficiency improvements, the Mobility Energy Productivity (MEP) metric is used.

Studies have shown that obtaining and utilizing information about the future state of vehicles can improve vehicle fuel economy (FE). However, there has been a lack of research into whether near-term technologies can be utilized to improve FE and the impact of real-world prediction error on potential FE improvements. In this study, a speed prediction method utilizing simulated vehicle-to-vehicle (V2V) communication with real-world driving data and a drive cycle database was developed to understand if incorporating near-term technologies could be utilized in a predictive energy management strategy to improve vehicle FE. This speed prediction method informs a predictive powertrain controller to determine the optimal engine operation for various prediction durations. The optimal engine operation is input into a validated high-fidelity fuel economy model of a Toyota Prius.

A dual independent valve phasing mechanism is applied to an air-cooled, pushrod actuated, V-twin motorcycle engine with two cams. As described, the mechanism is manually adjusted. The design is readily adapted to automated control. The phasing concept mounts the roller lifter in an eccentric sleeve. Rotation of the sleeve advances or retards the position of the roller lifter relative to the cam lobe. This action in turn advances or retards valve timing. Valve lift and duration are essentially unaffected. Predicted and experimental results from varying valve phase under idle, part load, and full load conditions are presented. The effect of valve overlap on hydrocarbon emissions at idle and NOx emissions at part load are described. Changes in volumetric efficiency and torque at wide-open throttle operation are also described.

Specification (spec) race engines are intended to reduce costs and increase the competitiveness in many racing classes. However, engines prepared by the best race engine builders routinely outperform truly ‘standard’ engines or engines prepared by less experienced tuners. This paper describes how engines can be modified to increase their power output and discusses various spec engine preparation techniques. Experimental and computational evidence is used to quantify the potential benefits that can be expected from each of the modifications discussed. By combining several relatively small improvements, a well prepared engine may be expected to enjoy a 5-8 % power benefit over an ‘average’ race engine, and perhaps as much as a 14-17 % benefit in power versus a truly standard production engine off the assembly line. This analysis also reveals the claims of much larger power improvements by some high-performance engine tuners can not be substantiated unless further modifications are made.

This study presents experimental and numerical examination of directly injected (DI) propane and iso-octane, surrogates for liquified petroleum gas (LPG) and gasoline, respectively, at various engine like conditions with the overall objective to establish the baseline with regards to fuel delivery required for future high efficiency DI-LPG fueled heavy-duty engines. Sprays for both iso-octane and propane were characterized and the results from the optical diagnostic techniques including high-speed Schlieren and planar Mie scattering imaging were applied to differentiate the liquid-phase regions and the bulk spray phenomenon from single plume behaviors. The experimental results, coupled with high-fidelity internal nozzle-flow simulations were then used to define best practices in CFD Lagrangian spray models.

Maintaining and diagnosing vehicle systems often involves a technician connecting a service computer to the vehicle diagnostic port through a vehicle diagnostics adapter (VDA). This creates a connection from the service software to the vehicle network through a protocol adapter. Often, the protocols for the personal computer (PC) hosted diagnostic programs use USB, and the diagnostic port provides access to the controller area network (CAN). However, the PC can also communicate to the VDA via WiFi or Bluetooth. There may be scenarios where these wireless interfaces are not appropriate, such as maintaining military vehicles. As such, a method to defeature the wireless capabilities of a typical vehicle diagnostic adapter is demonstrated without access to the source code or modifying the hardware. The process of understanding the vehicle diagnostic adapter system, its hardware components, the firmware for the main processor and subsystems, and the update mechanism is explored.

Connected autonomy brings with it the means of significantly increasing vehicle Energy Economy (EE) through optimal Eco-Driving control. Much research has been conducted in the area of autonomous Eco-Driving control via various methods. Generally, proposed algorithms fall into the broad categories of rules-based controls, optimal controls, and meta-heuristics. Proposed algorithms also vary in cost function type with the 2-norm of acceleration being common. In a previous study the authors classified and implemented commonly represented methods from the literature using real-world data. Results from the study showed a tradeoff between EE improvement and run-time and that the best overall performers were meta-heuristics. Results also showed that cost functions sensitive to the 1-norm of acceleration led to better performance than those which directly minimize the 2-norm.

Practical applications of recently developed sensor fusion algorithms perform poorly in the real world due to a lack of proper evaluation during development. Existing evaluation metrics do not properly address a wide variety of testing scenarios. This issue can be addressed using proactive performance measurements such as the tools of resilience engineering theory rather than reactive performance measurements such as root mean square error. Resilience engineering is an established discipline for evaluating proactive performance on complex socio-technical systems which has been underutilized for automated vehicle development and evaluation. In this study, we use resilience engineering metrics to assess the performance of a sensor fusion algorithm for vehicle localization. A Kalman Filter is used to fuse GPS, IMU and LiDAR data for vehicle localization in the CARLA simulator.