Search Results

System requirements are classified as FRs (Functional Requirements) and NFRs (Non-Functional Requirements) [1]. FRs focus on system goals. NFRs put constraints on the system. NFRs are often expressed in the form of properties that a system must fulfill in the process of realization of FRs. NFRs are usually categorized under headers such as performance, reliability, quality, security, maintainability without any mechanism to associate with the corresponding FRs in system architecture. This leads to challenges in further decomposition of requirements at subsystem levels. The paper proposes an approach for MBSE where NFRs can be identified and represented in a layered system architecture design. The proposed approach bifurcates NFRs to derive functions using SysML (extension to UML) to provide a functional or structural solution. The derived functions from NFRs are then either linked with an existing function or a new function is created in architecture design.

As we move towards greener technologies in the transportation sector, it becomes mandatory to monitor its impact or the utilization of such a technology in the intended manner. Improper usage results in lesser utilization of benefits of such green technologies. One such scenario is the range anxiety; users of parallel hybrid vehicles face a dilemma between charging and refueling the vehicle. If the hybrid vehicle is operated in a gas-powered mode most of the time, the emission levels would be comparable to those of gas-powered vehicles. On the other hand, gas-powered vehicles have no mechanism to completely cut CO2 emissions, unlike hybrids (electric drive). Emission regulatory bodies are facing difficulties in regulating each road vehicle. Therefore, the actual emission levels emitted from the vehicles are higher than the estimate provided by regulations. This paper discusses the possibility of implementing a Carbon Credit Scoring for each class of vehicles.

The individual development process for distributed, communicating electronic control units hinders the integration of Automotive systems and increases the overall costs. In order to facilitate such applications, services and protocols for Communication, Network Management, and Operating System must be standardized. The aim of the OSEK project is to work out a respective specification proposal in cooperation with several car manufacturers and suppliers. This will permit a cost-effective system integration and support the portation of system functions between different electronic control units.

The new generation of drive-by-wire systems currently under development has demanding requirements on the electronic architecture. Functions such as brake-by-wire or steer-by-wire require continued operation even in the presence of component failures. The electronic architecture must therefore provide fault-tolerance and real-time response. This in turn requires the operating system and the communication layer to be predictable, dependable and composable. It is well known that this properties are best supported by a time-triggered approach. A consortium consisting of German and French car manufacturers and suppliers, which aims at becoming a working group within the OSEK/VDX initiative, the OSEKtime consortium, is currently defining a specification for a time-triggered operating system and a fault-tolerant communication layer.1 The operating system and the communication layer are based on applicable interfaces of the OSEK/VDX standard.

Sensing and acting elements to guarantee the locking functions of seat belt retractors can emit noise when the retractor is subjected to externally applied vibrations. For these elements to function correctly, stiffness, inertia and friction needs to be in tune, leading to a complex motion resistance behavior, which makes it delicate to test for vibration induced noise. Requirements for a noise test are simplicity, robustness, repeatability, and independence of laboratory and test equipment. This paper reports on joint development activities for an alternative test procedure, involving three test laboratories with different equipment. In vehicle observation on parcel shelf mounted retractors, commercially available test equipment, and recent results from multi-axial component tests [1], set the frame for this work. Robustness and reliability of test results is being analyzed by means of sensitivity studies on several test parameters.

Modern vehicles are driven with various speeds over specific rough road tracks to detect the presence of annoying buzz, squeak and rattle sounds. As known in the occupant safety industry the mechanical locking systems of seat belt retractors can be significant noise sources, when excited by road vibrations. A reliable bench test procedure is necessary to quantify the acoustic performance of retractors, verify production quality, and derive realistic acoustic product targets. With this goal, a vibration noise test procedure has been developed condensing the work over three years by the K2 Comet automotive research project X2T1, various OEM retractor noise specifications closed to public and own research. The load case in this specification has been defined as horizontal 60 Hz bandlimited broadband excitation, while the N10 instationary loudness metric has been selected to characterize the retractor acoustic performance.

Seatbelt retractors as important part of modern safety systems are mounted in any automotive vehicle. Their internal locking mechanism is based on mechanically sensing elements. When the vehicle is run over rough road tracks, the retractor oscillates by spatial mode shapes and its interior components are subjected to vibrations in all 6 degrees of freedoms (DOF). Functional backlash of sensing elements cause impacts with neighbouring parts and leads to weak, but persistent rattle sound, being often rated acoustically annoying in the vehicle. Current acoustic retractor bench tests use exclusively uni-directional excitations. Therefore, a silent 2 DOF test bench is developed to investigate the effect of multi-dimensional excitation on retractor acoustics, combining two slip-tables, each driven independently by a shaker. Tests on this prototype test bench show, that cross coupling between the two perpendicular directions is less than 1%, allowing to control both directions independently.

The objective of this paper is to analyze the application of the stage-gates method (phase review) as a mechanism for integration and management between the product development process (PDP) and manufacturing, which is the first customer of the development teams. Using the stage-gates method, it is possible to ensure that manufacturing constraints and capabilities are incorporated and managed during the PDP. With the results obtained in the case study, it suggests that the stage-gates is a mechanism that, properly systematized, can contribute to greater efficiency of the PDP through the integration of manufacturing in the early stages of development.

Pneumatic valves are widely used in heavy commercial vehicles’ air braking systems. These valves are mainly used in the braking system layout to maintain the vehicle stability during dynamic conditions. Rubber components are inevitable in valves as a sealing element, and it is very difficult to predict the behavior due to its nonlinear nature. Basically, this valve efficiency is defined in terms of performance and response characteristics. These characteristics are determined in the concept stage itself using 1D simulation software. AMESim software has a variety of elements to use in a unique way for performance and response behavior prediction. For pneumatic valves, 1D analysis is an effective method and it gives good correlation with actual test results. During the modelling of pneumatic valves, some of the contacts between rubber and metals are controlled by various parameters such as damping, contact stiffness and desired phase angle.

Shim bond coverage analysis is a common practice in brake and pad manufacturing during brake pad development. This analysis is used to assess the quality of a shim bond and quantify it in case of any quality or de-bond issues during production and warranty returns. Currently, the analysis is carried out manually in the industry using a 1:1 template printed on tracing paper, which is placed on the deboned shim to identify bad bonded regions. The bond coverage is then calculated manually based on the data obtained from the template, which is a time-consuming process taking around 15 minutes per pad/shim analysis. To minimize manual work and increase accuracy, artificial intelligence is being used to estimate the shim bonding quality and coverage. The idea is to feed the deboned shim and pad picture to the model and predict the following: Whether the bond coverage is good or bad. Identify the good/bad and unnecessary regions on the shim/pad for bond coverage analysis.

The automotive industry continues to focus heavily on new electrified mobility strategies. Whether this electrified mobility consists of battery electric vehicles or electrified brake boost systems, there is a level of system sensitivity which presents new challenges throughout the industry during development of a new product. Most specifically in brake system development, much of the critical performance targets that have come along with electrification are cascaded down to the vehicle corner and its component performance. These corner level requirements have transformed to be more stringent in order to improve the overall system efficiency. It is important that the factors which lead to less than desirable performance are identified and understood. Some of the factors that influence the brake system corner performance are driven by multiple components, and this paper will go into identifying & explaining the following.