Search Results

Although Unmanned Aircraft Systems (UAS) have now for some time been used in segregated airspace where separation from other air traffic can be assured, potential users have interests to deploy UAS in non segregated airspace. Recent technological and operational improvements give reason to believe that UAS safety and performance capabilities are maturing. But the skies can only really open up to UAS when there is an agreed upon UAS safety policy with commonly accepted UAS Safety Risk Management (SRM) processes enabling to show that the risks related to UAS operations in all the different airspace classes can be adequately controlled. The overall objective is to develop a UAS SRM framework, supporting regulators and applicants through provision of detailed guidelines for each SRM step to be conducted, including 1) system description, 2) hazard identification, 3) risk analysis, 4) risk assessment, 5) risk treatment.

NASA's Deep Space Network (DSN) uses high-power transmitters on its large antennas to communicate with spacecraft of NASA and its partner agencies. The prime reflectors of the DSN antennas are parabolic, at 34m and 70m in diameter. The DSN transmitters radiate Continuous Wave (CW) signals at 20 kW - 500 kW at X-band and S-band frequencies. The combination of antenna reflector size and high frequency results in a very narrow beam with extensive oscillating near-field pattern. Another unique feature of the DSN antennas is that they (and the radiated beam) move mostly at very slow sidereal rate, essentially identical in magnitude and at the opposite direction of Earth rotation.

Recent changes in DoD procurement directives have encouraged the purchase of civilian products for use in certain military applications. One such application is the upgrade of avionics suites with the Global Positioning System (GPS) in military air transport aircraft to meet joint civil-military operational requirements. This paper reviews the Commercial Off-the-Shelf (COTS) concept and the proper use of TSOs, ACs, and FARs in both the design and integration process.

McDonnell Douglas has radically changed its approach to new product development under an internal project called Design, Manufacturing and Producibility Simulation (DMAPS). The new process has four steps: concept baseline, concept layout, assembly layout and build-to-package; each of which relies on three dimensional master solid models and a variety of advanced simulation and modeling tools. The result is a disciplined process that eliminates non-value added activity and provides all Integrated Product and Process Team (IP2T) members with the tools needed to effectively perform assigned tasks. McDonnell Douglas applied the new approach to a redesign of the T-45A Horizontal Stabilator. This project demonstrated that three dimensional master modeling can eliminate two dimensional drawings and enable physical mockups to be replaced by computergenerated virtual prototypes.

“As we handle more operations and passengers in the air, we must make certain we have the capacity to handle increased traffic on the ground.” - Jane Garvey, FAA Administrator (4/20/98) The FAA Technical Center (Aviation System Analysis and Modeling Branch, ACT-520) has been responsive to the FAA Airport Capacity Program customers for the past 22 years, developing, testing, and applying airfield and airspace simulation models. More than 90 capacity studies have been completed with ACT-520 personnel contributing their technical expertise to the Airport Design Teams. The teams are comprised of FAA personnel, airport operators, air carriers, other airport users and aviation industry representatives at major airports throughout the US. Initial studies focused on modeling airport operations from final approach, taxi, gate operations and departure processing. Later in the program, local airspace studies were included in some airport study efforts.

Unmanned Aircraft Systems (UAS) emerge as a viable, operational technology for potential civil and commercial applications in the National Airspace System (NAS). Although this new type of technology presents great potential, it also introduces a need for a thorough inquiry into its safety impact on the NAS. This study presents a systems-level approach to analyze the safety impact of introducing a new technology, such as UAS, into the NAS. Utilizing Safety Management Systems (SMS) principles and the existing regulatory structure, this paper outlines a methodology to determine a mandatory safety baseline for a specific area of interest regarding a new aviation technology, such as UAS Sense and Avoid. The proposed methodology is then employed to determine a baseline set of hazards and causal factors for the UAS Sense and Avoid problem domain and associated regulatory risk controls.

This paper compares the flammability of plastic automotive components to that of commodity, engineering, and specialty plastics as well as those used in commercial aircraft cabins with regard to performance in microscale combustion calorimetry tests. Not surprisingly, automotive components used in engine and passenger compartments are as flammable and ignitable as the commodity and engineering plastics of which they are made and much more flammable than those used in the interiors of aircraft.

As a part of its International Aging Aircraft Research Program, the Federal Aviation Administration is establishing a state-of-the-art Flight Loads Data Collection Program. Data collected in this program will provide the necessary mission profiles and load spectra information to characterize typical fleet service usage for the regional/commuter service life extension program. In addition, these data are applicable for both a safe life fatigue analysis and a damage tolerance fracture mechanics analysis. This paper describes the FAA approach and schedule for instrumenting fleet service aircraft, and the data reduction process.

Douglas developed the MD-90, an IAE V2500-powered derivative of the MD-80, to satisfy a customer need for a more environmentally - friendly 150-seat, short/medium range jet transport. The program was launched in late 1989 with requirements to: significantly reduce community noise and engine emissions improve aircraft fuel efficiency make other technical improvements where cost effective for the customer. The aircraft was certificated in November 1994 and entered airline service in April 1995. The MD-90 meets all of its technical requirements.

The crash impact characteristics of commuter category airplanes has recently been established using empirical procedures based on full scale aircraft impact test data for a range of aircraft sizes[1]. To compliment that empirical approach the Federal Aviation Administration (FAA) initiated a full scale commuter category airplane vertical impact test program. Those airplane vertical impact tests were structured to evaluate the airframe's capability to maintain its structural integrity and provide a protective shell for its occupants, to quantify the acceleration impact response characteristics of the airframe, and to evaluate the means necessary to provide occupant pelvic/lumbar column load injury protection up to the limits of survivable impact conditions.

Numerical simulations indicate that blast loading on aircraft structural joints can impart loading rates in excess of 10 Mlb/sec (ten million pounds per second, Reference 1). Experimental evidence, on the other hand, suggests that mechanical joint failure loads are highly loading rate dependent; for example, the failure load for a dynamically loaded tension joint can double from its static value. This paper discusses the progress and to-date findings of research on the assessment of strength failure of aircraft structural joints subjected to loading rates expected from an internal explosive detonation, and several associated experimental procedures to generate such dynamic loading. This work is conducted at MDC and at the University of Dayton Research Institute (UDRI) in support of the FAA Aircraft Hardening Program.

The U.S. Air Force has recognized the need for an alternative to the conventional hydraulic brake system. Hazards associated with fires and the maintenance required for a hydraulically actuated system are the principal drawbacks of hydraulic brake systems. In addition, an alternative brake system will be required to support a “More Electric” aircraft of the future. The solution to these problems was provided by the “Electrically Actuated Brake Technology (ELABRAT)” program, a three year program sponsored by the Flight Dynamics Directorate at Wright Patterson AFB. ELABRAT developed and demonstrated an Electromechanically Actuated (EMA) brake system to replace the existing hydraulically actuated piston housing and associated hydraulic control hardware.

The advent of digital electronics for use in civil aircraft, particularly the new technology represented by central processor and microprocessor controlled systems, represents a major challenge to the aviation industry. The Federal Aviation Administration (FAA) is charged with the responsibility of evaluating these systems to determine if they can be used safely. The complexity of these systems as compared to their analog counterparts in use today makes their evaluation difficult. This paper outlines the major concerns of the FAA with the use of software controlled digital systems for airborne applications. The methods which can be used by members of the aviation industry to obtain FAA certification of these systems are also discussed. The proposal of Special Committee SC-145 of the Radio Technical Commission for Aeronautics (RTCA) form the basis of the design methodology which is described for the successful development of the computer programs (software) to be used by these systems.

Pivot point concepts for fighter type aircraft with variable sweep wings are reviewed. Structural and aerodynamic considerations involved in sweep pivot location, a summary of endurance testing of Teflon lined journal bearings, and variation of fatigue life of the aircraft versus wing sweep position are discussed.

Aircraft designs have been characterized by an increasing utilization of variable geometry features as aircraft capabilities expand into new flight regimes. The trend seems likely to continue as requirements for new aircraft become continually more demanding. The successful application of variable geometry depends on several things: the understanding of the aerodynamic principles involved, efficient structure, and whether an overall worthwhile improvementin performance, maneuverability, or flying qualities is gained; since it certainly will cost more, be less reliable, and more difficult to maintain. The application of some existing and proposed variable geometry schemes to aircraft is discussed. The aerodynamic factors affecting low and high speed performance, maneuverability, and stability and control characteristics indicate some of the desirable and troublesome aspects of these concepts.

The present regulatory tool for assessment of aircraft smoke emission, the Ringelmann Chart, is described; some of the shortcomings associated with its use for aircraft are discussed; research and development efforts to improve on this system are described. The gaseous pollutants, their relative importance in an airport area and research underway or needed is also discussed.

Translation from a schematic to fabrication of a thick film hybrid microcircuit requires a knowledge of both circuit and process design. A lack of information in proper layout procedures often results in circuits which are unnecessarily difficult to fabricate. Design guidelines are given which aid in optimization of the circuit layout. Optimum geometries are discussed with particular emphasis on resistors. Examples of circuits are given from schematic to the finished product to illustrate the design layout procedure.

The Federal Aviation Administration is charged with the promotion of aviation safety. It is made up of three levels of administration within which are the functional organizations that manage the FAA programs and services. The Flight Standards service, which develops and enforces all regulations affecting aircraft and airmen, is the functional organization directly responsible for promoting aviation safety. This paper describes the Flight Standards aviation safety program.

This paper will discuss some considerations regarding man-machine interface during helicopter instrument flight. Several misconceptions have existed regarding FAA helicopter IFR certification. In response to some concerns pertaining to “excessive workload considerations,” designers have responded with several configurations. Some of these configurations have highlighted the need to educate the designer and the pilot population that the pilot must have the option to “actively participate” in the flight activity during helicopter IFR operations. “Active participation” includes the option of flying the vehicle through the normal flight controls. In addition, there has been some confusion regarding the terms “stability augmentation systems” and “autopilot.” Some individuals use the terms interchangeably. This paper will discuss the various lessons learned during FAA certification of helicopters for IFR flight from a certification test pilot's viewpoint.

The F/A-18 has the capability to perform a greater variety of fighter/attack missions than any other single-place aircraft ever produced. This paper will not address any new discussion of the “one vs. two” crewmember situation, but only present the human factors engineering history that produced the current man-machine interface in the F/A-18. The extensive software capability of the airplane has made changes found desirable during flight test reasonably easy to incorporate into production aircraft. These changes encompass everything from aircraft handling qualities and display formats (heads-down and heads-up) to radar and weapons system operation. Previous aircraft have depended, in varying degrees, on the unique capabilities of the pilot to compensate for inherent crew station/weapon system deficiencies.