Search Results

Unpredictable faults oriented from ambiguous reasons could occur in an engine of a vehicle. However, there are some symptoms from which an engine is working abnormally before the engine is stalled by faults. In this paper, methods for diagnosis of engine faults by using vibrations are proposed. Through bench tests, to extract features for fault diagnosis, various samples with normal and abnormal conditions are prepared and vibration signals from the block of an engine are measured and analyzed. To consider cost and performance of a sensor, vibrations from a knock sensor signal as well as accelerometers are analyzed. Measured vibration signals are synchronized with signal of the crank position sensor and analyzed to detect which event is involved. Modulation analysis and Hilbert transform are applied to extract features representing the symptoms of engine faults and to indicate when the abnormal event happens, respectively.

Connected and Autonomous Vehicles (CAV) rely on information obtained from sensors and communication to make decisions. In a Cooperative Vehicle Safety (CVS) system, information from remote vehicles (RV) is available at the host vehicle (HV) through the wireless network. Safety applications such as crash warning algorithms use this information to estimate the RV and HV states. However, this information is uncertain and sparse due to communication losses, limitations of communication protocols in high congestion scenarios, and perception errors caused by sensor limitations. In this paper we present a novel approach to improve the robustness of the CVS systems, by proposing an architecture that divide application and information/perception subsystems and a novel prediction method based on non-parametric Bayesian inference to mitigate the detrimental effect of data loss on the performance of safety applications.

A brake is a mechanical device that inhibits the motion by absorbing energy from a moving system. It is used for slowing or stopping a moving vehicle, wheel, axle, or to prevent its motion, most often accomplished by friction energy. Commonly, most brakes use friction between two surfaces pressed together to convert the kinetic energy of the moving object into heat, though other methods of energy conversion may be employed. If braking is repeated or sustained in high load or high-speed conditions, the motion will be unstable and can lead to a loss of stopping power because the disc capability for braking is not enough. These phenomena are generally defined as brake fading. Brake fade is caused by an overheating brake system. This paper describes the thermal modeling and process to predict the disk temperature under a condition which causes the fade characteristics.

Diesel Particulate Filter (DPF) system is considered as the most effective method to reduce particulate mater (PM) out of diesel exhaust. In general, silicon carbide (SiC) has been employed as the base materials for DPF substrate in diesel vehicles. Currently, a material, called cordierite (Cd), has been adopted for the DPF in a modern SUV with 2-liter CRDI diesel engine, complying EURO-5 emission regulation. Instead of its lower cost, Cd-based substrate was disadvantageous on thermal conductivity and heat capacity relative to SiC. In this work, the problems (i.e., face crack), initiated by the thermal drawbacks, were investigated as it applied into the DPF substrate. As the countermeasures to overcome, a control optimization of regeneration temperature elevation and an introduction of ingenious multiple regeneration strategy at problematic conditions were proposed and verified through real-road endurance tests.

This ‘Motion-Sensor Moustick’ is a sort of new concept control device as if a combination of PC mouse and joystick. It has three simple buttons and a haptic wheel designed for a faster and easier use to learn the vehicle infotainment functions. In addition it has a motion sensor to call a menu via hand approach to change media channels or to display status with just a driver's hand motion within a certain distance. Also this development includes a new concept GUI(graphical user interface) which is compatible with the ‘Moustick’ device. This development could be very helpful to use a car infotainment system.

Fuel Cell Electric Vehicles (FCEV) is zero emission vehicles because it produces only water as a byproduct. The other advantages are a long driving range and a quick refueling time compared with the pure electric vehicle. The air compressor supply compressed air to the cathode of fuel cell stack to chemically react with the hydrogen from the compressed hydrogen tank to generate electric power. The centrifugal air compressor can provide oil free clean air and has significantly improved durability/NVH performance compared with competitor's screw type air compressors. It has other advantages such as compact size and high efficiency at the actual vehicle design condition. In this paper we will describe the centrifugal air compressor's NVH improvement process including rotor resonant mode, rotor unbalance, stator's structural noise, and bearing problems.

While conventional methods like classical Transfer Path Analysis (TPA), Multiple Coherence Analysis (MCA), Operational Deflection Shape (ODS), and Modal Analysis have been widely used for road noise reduction, component-TPA from Model Based System Engineering (MBSE) is gaining attention for its ability to efficiently develop complex mobility systems. In this research, we propose a method to achieve road noise targets in the early stage of vehicle development using component-level TPA based on the blocked force method. An important point is to ensure convergence of measured test results (e.g. sound pressure at driver ear) and simulation results from component TPA. To conduct component-TPA, it is essential to have an independent tire model consisting of tire blocked force and tire Frequency Response Function (FRF), as well as full vehicle FRF and vehicle hub FRF.