Search Results

In this paper, we propose a hardware and a software design method considering functional safety for an electro-mechanical brake (EMB) control system which is used as a brake actuator in a brake-by-wire (BBW) system. A BBW system is usually composed of electro-mechanical calipers, a pedal simulator, and a control system. This simple by-wire structure eliminates the majority of bulky hydraulic brake devices such as boosters and master cylinders. The other benefit of a BBW system is its direct and independent response; this leads to enhanced controllability, thus resulting in not only improved basic braking performance but also considerably easier cooperative regenerative braking in hybrid, fuel-cell, and electric cars. The importance of a functional safety based approach to EMB electronic control unit (ECU) design has been emphasized because of its safety critical functions, which are executed with the aid of many electric actuators, sensors, and application software.

As the automotive industry quickly moves towards hybridized and electrified vehicles, the optimal integration of power electronics in these vehicles will have a significant impact not only on the cost, performance, reliability, and durability; but ultimately on customer acceptance and market success of these technologies. If properly executed with the right cost, performance, reliability and durability, then both the industry and the consumer will benefit. It is because of these interdependencies that the pace and scale of success, will hinge on effective collaboration. This collaboration will be built around the convergence of automotive and industrial technology. Where real time embedded controls mixes with high power and voltage levels. The industry has already seen several successful collaborations adapting power electronics to the automotive space in target vehicles.

Modern semiconductor devices enable highly efficient conversion of electrical power. Together with the microcontroller, they are the key elements for generation of the alternating currents from the car's DC supply that are necessary to drive high-performance units such as starter-alternators. These allow the combustion engine to crank up in several 100 ms and deliver up to 15 kW of electrical power. Smart driver ICs such as the TLE6280 enable the fast development of the interface between the microcontroller and the power switches. Currents of some 100A can be handled with the new OptiMOS FETs. Their rugged and ultra-low ohmic technology and their innovative packaging concepts, such as Power Modules and Power-Bonded MOSFETs, allow the building of compact and efficient control units.

The objective of this SAE paper is to discuss a power stage partitioning which will provide a cost effective and flexible Infineon Technologies solution to control future E-Valve applications. To fulfil environmental demands, E-Valve applications will enable car manufacturers to: Dynamically reduce the number of working cylinders according to the drivers' torque requirements Have an efficient and variable control over the engine load in various conditions Dispense with throttles and exhaust recirculation valves The paper will describe: 1 The integration of the 4 MosFET and the future technology development required for the next system optimization. 2 Gate driver integration (3 different scenarios): Analog Interfacing between the μcontroller and the MosFETs with an integrated protection functionality (Scenario A).

Infineon proposes a Quasi-Autonomous Gate Driver (QAGD) to manage an electrically actuated component, whether electromechanical, electromagnetic, or electrohydraulic. This paper examines some current control strategies that can be implemented within the QAGD, such as: Synchronous Sampling (SYSA), Hysteresis, Improved Synchronous Sampling-Hysteresis (ISSH), Suboscillation, Suboscillation with Back EMF Feedforward (SBEF) and Synchronous Control in Rotation Coordinates (SCRC). Analysis and simulation of these strategies indicate their advantages and disadvantages, which are then summarized in a comparison chart, from which the best solution for a given application can be determined. The QAGD IC proposed by Infineon adopts this solution by integrating the current controller and the driver unit for the MOSFETs in a single package. The inverter function can therefore be implemented using one QAGD and several MOSFETs, which greatly simplify the system and decrease the costs.

Vehicle Security means protecting potential threats, unintended malfunction and illegal tuning. In addition, it has become a more important issue on an automotive system as it is directly connected to the driver and pedestrian's life. Automotive industry significantly needs to enhance security policies to prevent attacks from hackers. Nevertheless, in some systems, performance still has to be considered at first when security functions are implemented. Especially, in case of Engine Management System (EMS), fast engine synchronization for starting should be considered as the first priority. This paper is intended to show an approach to design efficient secure boot implementation for EMS. At the beginning of this paper, the concept of secure boot is explained and several use cases are introduced according to execution modes, such as the foreground and background secure boot modes. As a next step, engine starting process by EMS is explained.

The automotive industry is moving from fossil carburant to electric drive trains due to the stringent CO2 reduction policies. In this context, the electric energy storage becomes one of the key parameters of successful rolling out electrified vehicles. Typical battery management systems comprises of battery cells measurement and monitoring, balancing function, temperature monitoring, together with the State of Charge and State of Health estimations based on the given measurements. Together with the functions above, a robust internal IC communication protocol is one of the key parameters to guarantee battery performance as well as safety. This paper focuses on the automotive battery communication system. On one side, the importance of the communication system and its impact in the EDT (electric drive train) is discussed including safety aspects. Later on, the different communication methods up to date are analyzed to further understand their limitations.

The increasing legal requirements for safety, emission reduction, fuel economy and onboard diagnostic systems are forcing the market to increase complexity. This complexity must not be a reason for slowing down the introduction of new systems. For efficiency, car manufacturers and system suppliers want to focus on their core competencies and leave the micro-controller complexity to silicon vendors. Competition forces system suppliers to jump to the most “function/cost” effective solution. For this reason it is very dangerous to move in the direction of specific solutions which require a large amount of effort to modify. Therefore the market goes in the direction of standards with clear interfaces. The approach presented overcomes these obstacles by introducing a Configurable I/O System (CIOS) layer. The CIOS encompasses basic software driver objects for engine management systems encapsulating the standard sensors and actuators.