Search Results

Given its ability to be combined with the three-way catalyst, the stoichiometric operation is significantly more attractive than the lean-burn process, when considering the increasingly severe NOx limit for cogeneration gas engines in Germany. However, the high temperature of the stoichiometric combustion results in increased wall heat losses, restricted combustion phasings (owing to knock tendency) and thus efficiency penalties. To lower the temperature of the stoichiometric combustion and thus improve the engine efficiency, exhaust gas recirculation (EGR) is one of the most effective means. Nevertheless, the dilution with EGR has much lower tolerance level than with excess air, which leads to a consequent drop in the thermal efficiency. In this regard, reducing the water vapor concentration in the recirculated exhaust gas and increasing the EGR reactivity are two potential measures that may extend the mixture dilution limit and result in engine efficiency benefits.

Small natural gas cogeneration engines usually operate with lean mixture and late combustion phasing to comply with NOx emission standards, leading to significant losses in engine efficiency. Owing to water evaporation heat and high specific heat capacity of the water vapor, leads the water injection to cooling the combustion chamber charge, which enables earlier combustion phasing, higher compression ratio and thus higher engine efficiency. Therefore, water injection enables mitigating the tradeoff between NOx emissions and engine performance, without loss in engine efficiency. The intake port injection represents, because of the low required injection pressure and the simple injector integration, a cost-effective way to introduce water into the engine. Hence, the purpose of this work is to adapt the intake port water injection timing to the charge mixture flow conditions in the intake port.