Search Results

Non-conventional operating conditions and fuels in diesel engines can produce longer ignition delays compared to conventional diesel combustion. If those extended delays are longer than the injection duration, the ignition and combustion progress can be significantly influenced by the transient following the end of injection (EOI), and especially by the modification of the mixture field. The objective of this paper is to assess how those long ignition delays, obtained by injecting at low in-cylinder temperatures (e.g., 760-800K), are affected by EOI. Two multi-hole diesel fuel injectors with either six 0.20mm orifices or seven 0.14mm orifices have been used in a 2.34L single-cylinder optical diesel engine. We consider a range of ambient top dead center (TDC) temperatures at the start of injection from 760-1000K as well as a range of injection durations from 0.5ms to 3.1ms. Ignition delays are computed through the analysis of both cylinder pressure and chemiluminescence imaging.

In-cylinder spray, mixing, combustion, and pollutant-formation processes for low-load (4 bar IMEP), low-temperature combustion conditions (12.7% charge oxygen, ∼2170 K stoichiometric adiabatic flame temperature) with early fuel injection (SOI=-22° ATDC) at two different charge densities (naturally aspirated, 1.34 bar abs. boost) were studied in an optical heavy-duty diesel engine using simultaneous pairings of multiple laser/imaging diagnostics. Laser-elastic/Mie scattering showed liquid-fuel penetration, fuel fluorescence indicated the leading edge of the vapor jet, chemiluminescence imaging showed the location of ignition, OH fluorescence probed the hot second-stage combustion, and soot luminosity and soot laser-induced incandescence measured development of in-cylinder soot.

The diffusion flame lift-off length of isolated, free diesel jets in quiescent atmospheres is known to have a strong influence on soot formation by affecting fuel/air mixing prior to combustion. In realistic engine environments, the proximity and temperature of in-cylinder surfaces, in-cylinder gas flows (swirl), and interactions between adjacent jets may affect the behavior of the flame lift-off, and thereby affect soot formation. To better understand the influence of these factors on the lift-off length and on soot formation, optical imaging diagnostics were employed to measure the flame lift-off length in an optically-accessible heavy-duty Direct Injection (DI) diesel engine. A two-camera OH chemiluminescence diagnostic was developed and employed to measure the flame lift-off length for a range of injector nozzle geometries and engine operating conditions.