Search Results

The article solves the problem of reducing electric power losses of the traction induction machine rotor to prevent its overheating in nominal and high-load modes. Electric losses of the rotor power are optimized by the stabilization of the main magnetic flow of the electric machine at a nominal level with the amplitude-frequency control in a wide range of speeds and increased loads. The quasi-independent excitation of the induction machine allows us to increase the rigidity of mechanical characteristics, decrease the rotor slip at nominal loads and overloads and significantly decrease electrical losses in the rotor as compared to other control methods. The article considers the technology of converting the power of individual phases into a single energy flow using a three-phase electric machine equivalent circuit and obtaining an energy model in the form of equations of instantaneous active and reactive power balance.

The treatment of solid surface by powerful streams of charged particles accelerated with power density ≥106 W/cm2 widely used for modification of different materials properties. The fast enter of electron beam power in the material of target causes the flow intense thermal and deformation processes. The changing of the structure, the phase composition, the microrelief of treated surface consequently happens. It is often accompanied by the hardening and increase of the wearing properties. The work proposed of using low-energy high-current electron beam as finish treatment of product obtained by selective laser melting of heat-resistant nickel alloy EP648. The subject of research was the surface properties of the product.

Overrunning clutches are devices for transmitting rotary motion in one direction only. These mechanisms are widely used in automotive industry, for example, in torque converters, impulse stepless transmissions, inertial continuously variable transmissions, starter engine starting system, and in other similar devices, where torque transmission is performed only in one direction. There are many different designs of the overrunning clutches, for example, ball, roller, cam, ratchet, spring ones, etc. But despite such a variety of designs and great efforts to establish reliable overrunning clutches, these mechanisms are still the weakest parts of many drive systems. Therefore, creation of reliable overrunning clutches is an urgent problem of mechanical engineering. Unfortunately, existing designs of the overrunning clutches have insufficient reliability and durability, which in many cases limits reliability of drive as a whole.

This paper is devoted to development of methodology of system analysis of power distribution systems and development of methods of synthesis of objective laws in the power distribution among drive wheels of a multipurpose wheel vehicle. The methodology of system analysis provides for formulation of the problem; structural analysis of power distribution systems; the synthesis of objective laws in the power distribution; development of methods for their implementation. The methodology is based on the theory of the synthesis of technical systems. In this paper it has been solved the inverse problem of dynamics, namely: in accordance with specified requirements to effectiveness of the multipurpose wheeled vehicle, expressed in the form of formulated performance criteria, it is necessary to determine parameters of characteristics of control actions.

The main indicators for mobility of a multipurpose wheeled vehicle are the maximum and average technical velocity (it is defined as the distance traveled divided by the time elapsed), and they are mainly determined by power-to-weight ratio and the parameters of the suspension. As our analysis shows, with the increase of the power-to-weight ratio of the vehicle and its weight, the growth rate of the velocity is reduced, and after reaching a certain value, the velocity remains almost constant. This is due to the fact that for operating conditions of the multi-purpose wheeled vehicle, movement on roads with different degrees of uneven distribution of the rolling resistance and adhesion, in both transverse and longitudinal directions, is typical.

The main indicators for mobility of a multipurpose wheeled vehicle are the maximum and average technical velocity (it is defined as the distance traveled divided by the time elapsed), and they are mainly determined by power-to-weight ratio and the parameters of the suspension. As our analysis shows, with the increase of the power-toweight ratio of the vehicle and its weight, the growth rate of the velocity is reduced, and after reaching a certain value, the velocity remains almost constant. This is due to the fact that for operating conditions of the multi-purpose wheeled vehicle, movement on roads with different degrees of uneven distribution of the rolling resistance and adhesion, in both transverse and longitudinal directions, is typical.

The inertial continuously variable transmissions are mechanical transmissions that are based on the principle of inertia. These transmissions have a lot of advantages. Usually, the design of the inertial continuously variable transmissions consists of inertia pulsed mechanism with unbalanced inertial elements and two overrunning clutches. Dynamics of the transmissions is described by systems of substantial nonlinear differential equations. In general, precise methods of solution for such equations do not exist. Therefore, in practice, approximate analytical and numerical methods must be employed. The main analytical methods employ successive approximation, a small parameter, or power series expansion. Each approach has its advantages and disadvantages. Therefore, we need to compare them in order to select the best method for dynamic study of such kind of transmissions.

The inertial continuously variable transmission is a mechanical transmission which is based on the principle of inertia. This transmission has a lot of advantages, namely: compactness, minimum friction losses and high efficiency as a result of the relatively small number of rotating components, a wide range of transformation of the torque. It does not need any conventional friction clutches. This transmission protects the engine from overload when the output shaft is braked. This drive guarantees optimum conditions of work for the engine regardless of the changing of load, and smoothly changes output speed according to the load. Mostly, design of this transmission consists of a pulsed mechanism with unbalanced inertial units and two overrunning clutches. The objects of the investigation are structural dynamic analysis of the continuously variable transmission. The physical and mathematical models of this transmission are developed.

The inertial continuously variable transmissions are mechanical transmissions that are based on the principle of inertia. These transmissions have a lot of advantages. Usually, the design of the inertial continuously variable transmissions consists of inertia pulsed mechanism with unbalanced inertial elements and two overrunning clutches. Dynamics of the transmissions is described by systems of substantial nonlinear differential equations. In general, precise methods of solution for such equations do not exist. Therefore, in practice, approximate analytical and numerical methods must be employed. The main analytical methods employ successive approximation, a small parameter, or power series expansion. Each approach has its advantages and disadvantages. Therefore, we need to compare them in order to select the best method for dynamic study of such kind of transmissions.

The design of the inertial continuously variable transmission consists of the inertial pulsed mechanism with unbalanced inertial elements and two overrunning clutches. The inertial pulsed mechanism is well developed and possesses high reliability. The overrunning clutches are the least reliable parts of the transmission and limit wide application of the transmission. In this paper, a new design of the inertial transmission with only one overrunning clutch is proposed. This transmission provides a high level of the load capability. The object of the investigation is a structural dynamic analysis of the continuously variable automatic inertial mechanical transmission. The physical and mathematical models of this transmission are developed. For these models of this transmission the differential equations of structural dynamics in the form of second kind Lagrange's equations were developed. These nonlinear differential equations were solved on the basis of Runge-Kutta numerical method.

A traction electric drive is offered for an industrial tractor. The drive contains the generator, the controlled rectifier, the independent inverters, and two onboard motors. The important feature of the offered electric drive is application of synchronous reactive machines of independent excitation as the generator and traction motors. These electric machines have the following technical features: the generator and motor design is brushless; and simple, the rotor has high mechanical rigidity that raises reliability at high speeds and overloads. There are no windings on the rotor; the motor is designed for ease of manufacture (by expert estimations its price is lower than the squirrel cage induction motor on the order of 15-20 %). The machines have increased efficiency a result of a “cold” rotor design; the motors have high torque overloads capacity (up to 4-6 times the values of nominal torque).

The inertial continuously variable transmissions are transmissions of mechanical type. They have a number of advantages in comparison with other types of transmissions. For example, they have a big value of the coefficient of efficiency, since the principle of their action does not imply the need to convert energy from one type to another one. These transmissions have a compact design, a wide range of torque transformation. They can operate in direct mode, smoothing the torsional vibrations in the system. At the moment when the output shaft is stopped, the input transmission shaft continues to rotate, that prevents the engine from overloading. There are other advantages. But despite these advantages, the inertial transmissions are not widely used in the automotive industry. The main reason for this is the inadequate durability of the freewheel mechanisms involved in the designs of the inertial transmissions.

The development of Additive Technologies (SLS/SLM, EBM, DMD) suggests the increase of range expansion of materials used. One of the most promising directions is products manufacturing from composite materials. The technology of composite micro-powders production on the basis of heat-resistant nickel alloy EP648 and Al2O3 is proposed. The aim of this research is to develop a method of producing composite micropowders for additive technology application. This method is based on modification of the metal micropowders surface by the second phase in a planetary mixer (mechanochemical synthesis).The obtained composite micropowders are compared with powders which are recommended for selective laser melting usage (produced by MTT Technology). The equipment used in the research: planetary mixer, scanning electron microscopy (SEM), optical granulomorphometer Occio 500nano.

The article solves the problem of increasing the energy efficiency of the traction electric drive in the low load conditions. The set objective is achieved by analogy with internal combustion engines by decreasing the consumed energy using the amplitude control of the three-phase voltage of the induction machine. The basis of the amplitude control is laid by the constancy criterion of the overload capacity with respect to the electromagnetic torque, which provides a reliable reserve from a "breakdown" of the induction machine mode in a wide range of speeds and loads. The control system of the traction electric drive contains a reference model of electromechanical energy conversion represented by the generalized equations of the instantaneous balance of the active and reactive power and the mechanical load. The induction machine is controlled by two adaptive variables: the electromagnetic torque and the voltage amplitude.

Currently, in order to effectively use the engine's energy resources and implement the required indicators of the traction, speed and fuel-economic properties of a vehicle, designers and manufacturers are trying to realize some certain properties to the transmission design that will ensure the most complete coordination of their joint work. However, even the optimal constructive solution cannot be universal, i.e. what is good for some operating conditions is not effective for other conditions. Therefore, today it is economically expedient to create vehicles intended for a certain, relatively narrow range of operating conditions. A wide range of modern continuously variable transmissions (CVT), as well as automatic control systems make it possible to radically change the approach to the design of vehicle transmissions. It remains only to determine the algorithms for changing the gear ratio of the CVT.

Dynamics of acceleration, mobility, fuel efficiency of wheeled vehicles are largely determined by the drive circuit to the driving wheels and bridges, as well as devices used in drive link nodes to distribute power among the driving wheels. This is especially important for multi-axle wheeled vehicles. In this paper, the object of the study is a multiaxial wheeled vehicle with an electric transmission consisting of an internal combustion engine with a power of 720 kW, one common generator and twelve traction motors mounted directly on the driving wheels. In connection with the change in load on the driving wheels due to the variability of soil properties, driving conditions (acceleration, braking, uniform motion), terrain topography, it is necessary to provide external regulation of electric machines working in the transmission of the vehicle.

The main indicators for mobility of a multipurpose wheeled vehicle are the maximum and average technical velocity, and they are mainly determined by power-to-weight ratio and the parameters of the suspension. As our analysis shows, with the increase of the power-to-weight ratio of the vehicle and its weight, the growth rate of the velocity is reduced, and after reaching a certain value, the velocity remains almost constant. This is due to the fact that for operating conditions of the multi-purpose wheeled vehicle, movement on roads with different degrees of uneven distribution of the rolling resistance and adhesion, in both transverse and longitudinal directions, is typical. In this investigation we evaluate the effectiveness of the main methods of power distribution among drive wheels of the multi-purpose wheeled vehicles.

This paper is devoted to development of methodology of system analysis of power distribution systems and methods of synthesis of objective laws in the power distribution among drive wheels of a multipurpose wheel vehicle. The methodology of system analysis provides for formulation of the problem; structural analysis of power distribution systems; the synthesis of objective laws in the power distribution; development of methods for their implementation. The methodology is based on the theory of the synthesis of technical systems. In this paper parameters of characteristics of control actions have been determined in accordance with specified requirements to effectiveness of the multipurpose wheeled vehicle expressed in the form of formulated performance criteria.

Overrunning clutches are devices for transmitting rotary motion in one direction only. These mechanisms are widely used in automotive industry, for example, in torque converters, impulse stepless transmissions, inertial continuously variable transmissions, starter engine starting system, and in other similar devices, where torque transmission is performed only in one direction. There are many different designs of the overrunning clutches, for example, ball, roller, cam, ratchet, spring ones, etc. But despite such a variety of designs and great efforts to establish reliable overrunning clutches, these mechanisms are still the weakest parts of many drive systems. Therefore, creation of reliable overrunning clutches is an urgent problem of mechanical engineering. Unfortunately, existing designs of the overrunning clutches have insufficient reliability and durability, which in many cases limits reliability of drive as a whole.

The main indicators for mobility of a multipurpose wheeled vehicle (MWV) are the maximum and average technical velocity, and they are mainly determined by power-to-weight ratio and parameters of the suspension. As our analysis shows, with the increase of the power-to-weight ratio of the vehicle and its weight, the growth rate of the velocity is reduced, and after reaching a certain value, the velocity remains almost constant. This is due to the fact that for operating conditions of the multipurpose wheeled vehicle, movement on roads with different degrees of uneven distribution of the rolling resistance and tire traction, in both transverse and longitudinal directions, is typical. In this investigation we evaluate the effectiveness of the main methods of power distribution between the drive wheels of the multipurpose wheeled vehicles: disabling of drive axles, blocking of cross-axle and inter-axle differentials, a slowdown of slipping wheels.