Search Results

With the electrification of automobiles, such as hybridization, engines on these vehicles operate more frequently at low oil temperatures, while engines are more specifically run at low engine speed and high load condition for driving vehicles. Hence, engine oils are required to reduce their viscosity at low temperature for friction reduction to improve fuel economy and maintain high temperature viscosity enough to protect engine parts for robustness at the same time. This leads to the improvement of viscosity index, the "ultra-high viscosity index (UHVI)" concept. The novel engine oil technology with a new high performance polymer was investigated. One of experimental oils showed the 100°C viscosity equivalent to SAE 0W-16 grade and the better fuel economy than that of SAE 0W-8 oil by an engine motoring friction test.

Torque loss reduction at differential gear unit is important to improve the fuel economy of automobiles. One effective way is to decrease the viscosity of lubricants as it results in less churning loss. However, this option creates a higher potential for thin oil films, which could damage the mechanical parts. At tapered roller bearings, in particular, wear at the large end face of rollers and its counterpart, known as bearing bottom wear is one of major failure modes. To understand the wear mechanism, wear at the rolling contact surface of rollers and its counterpart, known as bearing side wear, was also observed to confirm the wear impact on the tapered roller bearings. Because gear oils are also required to avoid seizure under extreme pressure, the combination of a phosphorus anti-wear agent and a sulfurous extreme pressure agent are formulated.