Search Results

Swing-out doors can easily cause damage to adjacent parked vehicles in tight parking spaces. Also, they are not traffic-friendly when the vehicles are parallel parked on busy road sides. This paper makes an attempt to come up with an innovative to design and develop a mechanism for dual sliding doors for a small sized car. The doors are supported only on two points of contact as compared to the usual sliding minivan doors which have three contact supports for sliding. These two points are called the “Upper control link and Lower support arm”. To open the door, first the door, has to push out by 90 degrees and then it has to slide in the fore-aft direction to open or close. For the doors, a track was placed just below the window at the beltline location and a triangular sub-roller assembly was designed for sliding motion.

Sliding doors are usually employed on the rear side of minivans and some large vehicles for easy egress and ingress. Furthermore, dual sliding doors are frequently observed in various concept models. This paper describes design of a dual sliding door for a small-size car. A new sliding mechanism with two sliding contact points is proposed with the B-pillar incorporated in the door structure made of high strength steel. Two sliding tracks are located in the door and the rocker panel. The door linkages first swivel and then slide with the help of the rollers in the tracks to open the door. The sliding mechanism and the door structure were validated using CAE tools such as HyperMesh, MSC/NASTRAN [2] and LS-DYNA[3].