Search Results

Testing real-time vehicular systems challenges the tester to design test cases for concurrent and sequential input events, emulating unexpected user and usage profiles. The vehicle response should be robust to unexpected user actions. Sequence Covering Arrays (SCA) offer an approach which can emulate such unexpected user actions by generating an optimized set of test vectors which cover all possible t-way sequences of events. The objective of this research was to find an efficient nonfunctional sequence testing (NFST) strategy for testing the robustness of real-time automotive embedded systems measured by their ability to recover (prove-out test) after applying sequences of user and usage patterns generated by combinatorial test algorithms, considered as “noisy” inputs. The method was validated with a case study of an automotive embedded system tested at Hardware-In-the-Loop (HIL) level. The random sequences were able to alter the system functionality observed at the prove-out test.

This paper describes a comparative study aimed at identifying cultural differences in automotive-HMI usability. This was part of a larger research to investigate in depth the problems users experience with vehicle-HMI in emerging-regions and help in the development of HMI design guidelines to include cultural consideration. Culture is recognised as a significant influence on user behaviour, as it correlates with certain preferences and abilities. A system may be fully usable for one group of users and environmental conditions but totally unsuitable for another. Even if a conscientious engineer designs a proper human-machine-interface for use in a given environment, the designer is often unable to foresee effects of a different culture on vehicle's HMI usability. Culture has different patterns of social behaviour and interaction which have led many researchers to develop cultural-models to describe these differences.

Increased torque values passing from engine to transmission have, increasingly become a problem regarding shaft misalignment. Engineers are restricted with regard to applying ISO standards when investigating bearing life cycles as they tend only to cover normal [radial thrust] load conditions. Depending on the application, the need has arisen for numerical models to determine reduction in normal life cycles due to abnormal running conditions. The Simulia Finite Element package Abaqus v6.7 provides trends in the deformations, contact pressures and their respective distribution. It was found the most efficient profile, with regards to a uniform contact pressure, under both radial and misaligned conditions is the toroidal profile.

The popularity of CAN (Controller Area Network) in the production vehicles is well established. As a result, CAN has been developed for use in many non-automotive applications. This gave rise to the development of an open higher layer CAN protocol known as DeviceNet. With the popularity of DeviceNet for Automation Systems, this technology has drastically decreased in cost. Although DeviceNet is quite complex to develop, it easier to implement than SAE J1939 due to the large number of commercial off-the-shelf product that is available. Also, there are many configuration and diagnostic tools available by the same means. There are more than 300 vendors of DeviceNet product. Researchers at the University of Warwick have built a vehicle demonstrator using CAN/DeviceNet modules. This paper will illustrate the ease of vehicle system integration utilising this popular technology.

This paper outlines a method of producing optically perfect transparent glass fiber pre-pregs. The technique uses a wetting resin in a sandwich construction with glass fibers; the construction process induces complete wetting of the fibers such that they are not visible in the resin. The transparent pre-pregs have subsequently been laid into a mould and back-injected with polycarbonate. Results show that components produced via this method exhibit flexural rigidity three times greater than unreinforced equivalent polycarbonate mouldings.

Complexity of electronics and embedded software systems in automobiles has been increasing over the years. This necessitates the need for an effective and exhaustive development and validation process in order to deliver fault free vehicles at reduced time to market. Model-based Product Engineering (MBPE) is a new process for development and validation of embedded control software. The process is generic and defines the engineering activities to plan and assess the progress and quality of the software developed for automotive applications. The MBPE process is comprised of six levels (one design level and five verification and validation levels) ranging from the vehicle requirements phase to the start of production. The process describes the work products to be delivered during the course of product development and also aligns the delivery plan to overall vehicle development milestones.

Increasing automation in the automotive systems has re-focused the industry’s attention on verification and validation methods and especially on the development of test scenarios. The complex nature of Advanced Driver Assistance Systems (ADASs) and Automated Driving (AD) systems warrant the adoption of new and innovative means of evaluating and establishing the safety of such systems. In this paper, the authors discuss the results from a semi-structured interview study, which involved interviewing ADAS and AD experts across the industry supply chain. Eighteen experts (each with over 10 years’ of experience in testing and development of automotive systems) from different countries were interviewed on two themes: test methods and test scenarios. Each of the themes had three guiding questions which had some follow-up questions. The interviews were transcribed and a thematic analysis via coding was conducted on the transcripts.

A phenomenological model is proposed in this paper for simulating the effect of wall friction in turbulent pipe flows. The flow in this model is divided into two regions: wall region and core region. The turbulent flow in the core region obeys the law of the wake, while the flow in the wall region follows the law of the wall. In the overlapping region they interact and behave like a dynamic system of two degrees of freedom. The model can predict the variation of friction coefficient and phase shift. The model is formulated in a simple form, and can be easily integrated into one-dimensional flow calculations. The model has been validated against published measured data, including a pulsating flow without flow reversal and a reciprocating flow with flow reversal. The model predictions have shown good agreement with measurements.

A comprehensive general purpose engine simulation model has been successfully developed. This paper reports on an investigation undertaken to compare the accuracy and computational efficiency of four alternative methods for modelling the gas flow and performance in internal combustion engines. The comparison is based on the filling-and-emptying method, the acoustic method, the Lax-Wendroff two-stage difference method and the Harten-Lax-Leer upstream method, using a unified treatment for the boundary conditions. The filling-and-emptying method is the quickest method among these four methods, giving performance predictions with reasonably good accuracy, and is suitable for simulating engines using not highly tuned gas exchange systems. Based on the linearized Euler equations, the acoustic method is capable of describing time-varying pressure distributions along a pipe.

For high Reynolds number flows, the fine structure turbulence is universal in the inertial subrange according to the Kolmogorov local isotropy theory; while for low-to-moderate Reynolds number flows, the turbulence tends to display a common structure for a particular type of shear flows from the Townsend structural similarity. The power laws for the turbulent flows reflect the similarity in the turbulence fine structure. The paper discusses the relationship between drop breakup and turbulence fine structure. A predictive formula for drop breakup in the turbulent flow is suggested based on the energy balance between turbulence separating kinetic energy (i.e. turbulence structure function) and surface tension. The model has been validated on a number of empirical relations for drop breakup in different turbulent flows. It is known that the drop size distribution in shear flows can be approximately expressed by a lognormal distribution.

The advent of 3D displays offers Human-Machine Interface (HMI) designers and engineers new opportunities to shape the user's experience of information within the vehicle. However, the application of 3D displays to the in-vehicle environment introduces a number of new parameters that must be carefully considered in order to optimise the user experience. In addition, there is potential for 3D displays to increase driver inattention, either through diverting the driver's attention away from the road or by increasing the time taken to assimilate information. Manufacturers must therefore take great care in establishing the ‘do’s and ‘don’t's of 3D interface design for the automotive context, providing a sound basis upon which HMI designers can innovate. This paper describes the approach and findings of a three-part investigation into the use of 3D displays in the instrument cluster of a road car, the overall aim of which was to define the boundaries of the 3D HMI design space.