Search Results

Testing real-time vehicular systems challenges the tester to design test cases for concurrent and sequential input events, emulating unexpected user and usage profiles. The vehicle response should be robust to unexpected user actions. Sequence Covering Arrays (SCA) offer an approach which can emulate such unexpected user actions by generating an optimized set of test vectors which cover all possible t-way sequences of events. The objective of this research was to find an efficient nonfunctional sequence testing (NFST) strategy for testing the robustness of real-time automotive embedded systems measured by their ability to recover (prove-out test) after applying sequences of user and usage patterns generated by combinatorial test algorithms, considered as “noisy” inputs. The method was validated with a case study of an automotive embedded system tested at Hardware-In-the-Loop (HIL) level. The random sequences were able to alter the system functionality observed at the prove-out test.

This paper describes a comparative study aimed at identifying cultural differences in automotive-HMI usability. This was part of a larger research to investigate in depth the problems users experience with vehicle-HMI in emerging-regions and help in the development of HMI design guidelines to include cultural consideration. Culture is recognised as a significant influence on user behaviour, as it correlates with certain preferences and abilities. A system may be fully usable for one group of users and environmental conditions but totally unsuitable for another. Even if a conscientious engineer designs a proper human-machine-interface for use in a given environment, the designer is often unable to foresee effects of a different culture on vehicle's HMI usability. Culture has different patterns of social behaviour and interaction which have led many researchers to develop cultural-models to describe these differences.

Increased torque values passing from engine to transmission have, increasingly become a problem regarding shaft misalignment. Engineers are restricted with regard to applying ISO standards when investigating bearing life cycles as they tend only to cover normal [radial thrust] load conditions. Depending on the application, the need has arisen for numerical models to determine reduction in normal life cycles due to abnormal running conditions. The Simulia Finite Element package Abaqus v6.7 provides trends in the deformations, contact pressures and their respective distribution. It was found the most efficient profile, with regards to a uniform contact pressure, under both radial and misaligned conditions is the toroidal profile.

An automotive side door latch release mechanism has been modelled for the locking and unlocking vehicle functionality in Dymola. The performance of the developed door lock model is evaluated against an existing model of a similar door locking/unlocking system in Stateflow. The model performance is also compared with measurements from a real vehicle door latch. The model is converted into a Simulink model and built for a real-time environment such as the dSPACE target with a fixed step size solver. It is shown that a step size as small as 1 ms can be used for real-time simulation without task overrunning in the real-time target. The model is also benchmarked on a multiprocessor setup as multiprocessor simulators are common in system-level networked Electronic Controller Unit (ECU) testing facilities for implementing high fidelity closed loop models of integrated ECUs and actuators.

The popularity of CAN (Controller Area Network) in the production vehicles is well established. As a result, CAN has been developed for use in many non-automotive applications. This gave rise to the development of an open higher layer CAN protocol known as DeviceNet. With the popularity of DeviceNet for Automation Systems, this technology has drastically decreased in cost. Although DeviceNet is quite complex to develop, it easier to implement than SAE J1939 due to the large number of commercial off-the-shelf product that is available. Also, there are many configuration and diagnostic tools available by the same means. There are more than 300 vendors of DeviceNet product. Researchers at the University of Warwick have built a vehicle demonstrator using CAN/DeviceNet modules. This paper will illustrate the ease of vehicle system integration utilising this popular technology.

For Homogeneous Charge Compression Ignition (HCCI) combustion, the auto-ignition process is very sensitive to in-cylinder conditions. This includes the change in in-cylinder temperature, the composition of chemical components and their concentrations. This sensitivity presents a major challenge for the accurate control of reliable and efficient HCCI combustion. This paper outlines our recent work: 1. a real-time control oriented gasoline-fueled HCCI combustion model and its implementation in Simulink with fixed step for the conversion into dSPACE Hardware-in-the-Loop (HIL) simulation purpose. 2. The development of model-based fast calibration for the best fuel efficiency and hydrocarbon emissions via evolutionary algorithm (EA). The model reported in this paper is able to run in real-time cycle-to-cycle under engine speeds below 4000rpm and with fixed simulation steps.

Hardware-in-the-loop (HIL) simulations have long been used to test electronic control units (ECUs) and software in car manufacturers. It provides an effective platform to the rapid development process of the ECU control algorithms and accommodates the added complexity of the plant under control. Accurate Model based HIL simulation (AMHIL) is considered as a most efficient and cost effective way for exploration of new designs and development of new products, particularly in calibration and parameterization of vehicle stability controllers. The work presented in the paper is to develop a mathematical model of a windscreen wiper system for the purpose of conducting HIL vehicle test and eventually to replace the real component with the model for cost cutting and improved test efficiency. The model is developed based on the electro-mechanical engineering principles.

Complexity of electronics and embedded software systems in automobiles has been increasing over the years. This necessitates the need for an effective and exhaustive development and validation process in order to deliver fault free vehicles at reduced time to market. Model-based Product Engineering (MBPE) is a new process for development and validation of embedded control software. The process is generic and defines the engineering activities to plan and assess the progress and quality of the software developed for automotive applications. The MBPE process is comprised of six levels (one design level and five verification and validation levels) ranging from the vehicle requirements phase to the start of production. The process describes the work products to be delivered during the course of product development and also aligns the delivery plan to overall vehicle development milestones.

Increasing automation in the automotive systems has re-focused the industry’s attention on verification and validation methods and especially on the development of test scenarios. The complex nature of Advanced Driver Assistance Systems (ADASs) and Automated Driving (AD) systems warrant the adoption of new and innovative means of evaluating and establishing the safety of such systems. In this paper, the authors discuss the results from a semi-structured interview study, which involved interviewing ADAS and AD experts across the industry supply chain. Eighteen experts (each with over 10 years’ of experience in testing and development of automotive systems) from different countries were interviewed on two themes: test methods and test scenarios. Each of the themes had three guiding questions which had some follow-up questions. The interviews were transcribed and a thematic analysis via coding was conducted on the transcripts.

For high Reynolds number flows, the fine structure turbulence is universal in the inertial subrange according to the Kolmogorov local isotropy theory; while for low-to-moderate Reynolds number flows, the turbulence tends to display a common structure for a particular type of shear flows from the Townsend structural similarity. The power laws for the turbulent flows reflect the similarity in the turbulence fine structure. The paper discusses the relationship between drop breakup and turbulence fine structure. A predictive formula for drop breakup in the turbulent flow is suggested based on the energy balance between turbulence separating kinetic energy (i.e. turbulence structure function) and surface tension. The model has been validated on a number of empirical relations for drop breakup in different turbulent flows. It is known that the drop size distribution in shear flows can be approximately expressed by a lognormal distribution.

The advent of 3D displays offers Human-Machine Interface (HMI) designers and engineers new opportunities to shape the user's experience of information within the vehicle. However, the application of 3D displays to the in-vehicle environment introduces a number of new parameters that must be carefully considered in order to optimise the user experience. In addition, there is potential for 3D displays to increase driver inattention, either through diverting the driver's attention away from the road or by increasing the time taken to assimilate information. Manufacturers must therefore take great care in establishing the ‘do’s and ‘don’t's of 3D interface design for the automotive context, providing a sound basis upon which HMI designers can innovate. This paper describes the approach and findings of a three-part investigation into the use of 3D displays in the instrument cluster of a road car, the overall aim of which was to define the boundaries of the 3D HMI design space.