Search Results

Engine mounts are an integral part of the vehicle that helps in reducing the vibrations generated from the engine. Engine mounts require a simple yet complicated amalgamation of two very different materials, steel and rubber. Proper adhesion between the two is required to prevent any part failure. Therefore, it becomes important that a comprehensive study is done to understand the mating phenomenon of both. A good linking between rubber and metal substrate is governed by surface pretreatment. Various methodologies such as mechanical and chemical are adopted for the same. This paper aims to present a comparative study as to which surface pretreatment has an edge over other techniques in terms of separation force required to break the bonding between the two parts. The study also presents a cost comparison between the techniques so that the best possible technique can be put to use in the commercial vehicle industry.

The job of a suspension system is to maximize the friction between the tires and the road surface, to provide steering stability with good handling and to act as a cushioning device to ensure the comfort of the driver and passengers. The suspension system also protects the vehicle and any cargo or luggage from damage and wear. Commonly the strength of these suspension systems is evaluated by endurance trials on field or Rig testing which are time consuming and costly. On the other hand, virtual testing methods for strength and stiffness evaluation provide useful information early in the design cycle and save significant time and cost. However, the virtual method also needs validation, which can be achieved by physical co-relations (via rig tests). A study has been done to predict the behavior of Leaf Spring Suspensions entirely through the FEA (Finite Element Analysis) route and correlating those results with physical test.

In an automobile, main function of the steering system is to allow the driver to guide the vehicle on a desired course. Steering system consists of various components & linkages. Using these linkages, the torque from steering wheel is transferred to tyre which results in turning of the vehicle. Over the life of vehicle, these steering components are subjected to various loading conditions. As steering components are safety critical parts in the vehicle, therefore they should not fail while running because it will cause vehicle breakdown. In commercial vehicle segment, vehicle breakdown means delay in freight delivery which results in huge loss to costumer. Therefore, while designing steering components one should consider all the possible loadings condition those are possible. But, it can’t be done through theoretical calculation. Therefore, physical tests have to be carried out to validate design of steering system, which is very costly & time-consuming process.

At the time of invention of road coaches, the vehicle consisted only of an axle with wheels and a body attached. Smooth roads were built for a better ride comfort however they were not consistent. The road coaches were too bumpy and uncomfortable for the passenger along with the driver who was not able to control the vehicle. That's why the engineers had to shift their attention to the suspension system for a better ride comfort and handling. The technology has advanced with time so as the suspension system. Rubber ended type leaf spring is one of the suspension system types available in the industry. The main function of a suspension in order of importance is as below: 1 Acts as a cushioning device ensuring the comfort of the driver and passengers; 2 Maximizes the contact between the tires and the road surface to provide steering stability with good handling; 3 Protects the vehicle itself and any cargo or luggage from damage and wear.

Ever-increasing operational cost, reducing profit margins & increase in competition, it is of upmost significance for fleet owners & drivers to opt for a vehicle having maximum uptime. OEM's are under immense pressure to design & develop vehicles/subsystems which are reliable enough to minimize downtime & withstand heavy overloading plus extreme operating conditions especially tippers. Vehicle systems like Wheel end (hub, bearing, and grease) which are designed & packaged according to a very stringent envelop & operate as a closed system facing all the extremities of operating conditions. This undoubtly make them prone to no. of failure modes which are resulting in vehicle unplanned stoppages, so any failure mode related to the same must be taken care with utmost importance. In commercial vehicles the bearing outer cup is in interference fit with the hub. These bearings of wheel hub have to be maintained at the wheel end play of few microns.

In the view of an eco-friendly environmental future, the major automotive manufacturers are making a move towards electric mobility. The electric vehicle helps to achieve Zero-emission. However, there are some limitations too. The zero-emission Battery electric vehicle (BEV) can provide a limited range only; the market penetration is getting difficult because of an energy storage capability. The addition of an electric vehicle with a fuel cell unit and a hydrogen supply unit can increase the range and the energy capacity of the system. Fuel cell electric vehicle (FCEV) system is faster to refill compared to plug-in Battery electric vehicle (BEV). This study deals with a behavioral analysis of Polymer Electrolyte Membrane (PEM) Fuel cell; with different drive cycles. In this, a fuel cell model developed and simulated in the SIMULINK environment with different drive cycle and results were obtained. The fuel cell controls also were analyzed for the city start/stop cycle.

Passenger vehicles are used as one of the frequently used and versatile mode of transport. Commercial buses cater to short to long distance travel for city as well as highway applications. Thus, passenger ride comfort becomes paramount for the salability of the vehicle. Generally, it is observed that the rear seat experiences the worst ride comfort characteristics due to rear overhang and pitching characteristics of buses. Therefore the objective of this project is to improve the rear seat vibrations of passenger bus by tuning damper characteristics. Shock absorbers, being a low cost and easily interchangeable component is tuned first before optimizing other suspension parameters. The methodology is as follows: first, a 4 degree of freedom mathematical model is created on MATLAB Simulink R2015a environment. Time domain data is obtained by road load data analysis and used as an input for the mathematical model.

With the enforcement of ever stringent emission norms, vehicular subsystems are witnessing a substantial transition from electro-mechanical to electronic control-based systems. With the inclusion of incremental modifications to be suitable for future applications, the electrical system has reached a point where it is undergoing a major transition. Further catalyzing this reform is the demand for mass passenger safety, bringing about its own set of uncompromising norms. While the implications of the regulations enforce cleaner and safer mobility, there also arises a conflict between vehicular functionality and safety. This paper enumerates on the first-hand experience of how the direct transfer of the elementary vehicle battery isolator from the prior euro-4 electrical system to the present euro-6 system resulted in a disharmonized vehicle operation when made to comply with both functionality and passenger safety norms.

Turbocharging has become an important method for increasing the power output of diesel engines. A perfectly matched turbocharger can increase the engine efficiency and decrease the BSFC. For turbocharger matching, engine manufacturers are dependent on the turbocharger manufacturers. In this paper, an analytical model is presented which could help engine manufacturers to analyze the performance of turbocharger for different load and ambient condition using compressor and turbine map provided by turbo manufacturers. The analytical model calculates the required pressure at inlet and exhaust manifold for fixed vane turbocharger with waste gate using inputs like BSFC, lambda, volumetric efficiency, turbocharger efficiency and heat loss, that are available with the engine manufacturer.

The need to develop products faster and to have designs which are first time right have put enormous pressure on the product development timelines, thus making computer aided optimization one of the most important tool in achieving these targets. In this paper, a design of experiments (DOE) study is used, to gain an insight as to, how changes to different parameters of front suspension and steering of a passenger bus affect its kinematic properties and thus to obtain an optimized design in terms of handling parameters such as bump steer, percent ackermann error and lock to lock rotation angle of steering wheel. The conventional hit and trial method is time consuming and monotonous and still is an approximate method, whereas in design of experiments (DOE), a model is repeatedly run through simulations in a single setup, for various combinations of parameter settings.