Search Results

This computational study compares predictions and experimental results for the use of direct injected iso-octane fuel during the negative valve overlap (NVO) period to achieve HCCI combustion. The total fuel injection was altered in two ways. First the pre-DI percent, (the ratio of direct injected fuel during the NVO period “pre-DI” to the secondary fuel supplied at the intake manifold “PI”), was varied at a fixed pre-DI injection timing, Secondly the timing of the pre-DI injection was varied while all of the fuel was supplied during the NVO period. A multi-zone, two-dimensional CFD simulation with chemistry was performed using KIVA-3V release 2 implemented with the CHEMKIN solver. The simulations were performed during the NVO period only.

A single cylinder Yamaha research engine was operated with gasoline HCCI combustion using negative valve overlap (NVO). The injection strategy for this study involved using fuel injected directly into the cylinder during the NVO period (pre-DI) along with a secondary injection either in the intake port (PI) or directly into the cylinder (DI). The effects of timing of the pre-DI injection along with the percent of fuel injected during the pre-DI injection were studied in two sets of experiments using secondary PI and DI injections in separate experiments. Results have shown that by varying the pre-DI timing and pre-DI percent the main HCCI combustion timing can be influenced as a result of varied heat release during the negative valve overlap period along with hypothesized varied degrees of reformation of the pre-DI injected fuel. In addition to varying the main combustion timing the ISFC, emissions and combustion stability are all influenced by changes in pre-DI timing and percent.

The diesel/natural gas engine configuration provides a potential alternative solution for PM and NOx emissions reduction from typical diesel engine operations. However, their engine operations suffer from high NMHC/methane emissions and poor engine performance, especially at light loads. By increasing the diesel pilot quantity, the performance and reduction of NMHC/methane emissions can be improved but the emission levels are still very high. Clearly, a typical DOC is not good enough to treat NMHC/methane emissions. Methane has been known as one of most stable species that is difficult to catalytically oxidize in lean burn environment and low exhaust temperatures. An aftertreatment system exclusively designed for treating methane emissions from DDF operations is therefore necessary. The current work is aimed to establish an effective computational tool in order to study the newly proposed catalytic converter system concept on treating methane from DDF operations.

Towards the effort of using natural gas as an alternative fuel for a diesel engine, the concept of Diesel Dual Fuel (DDF) engine has been shown as a strong candidate. Typically, DDF's engine-out emission species such as soot and nitrogen oxides are decreased while carbon monoxide and hydrocarbons are increased. The aftertreatment system is required in order to reduce these pollutant emissions from DDF engines. Additionally, DDF engine exhaust has a wide temperature span and is rich in oxygen, which makes HC emissions, especially methane (CH₄), difficult to treat. Until now, it is widely accepted that the key parameter influencing methane oxidation in a catalytic converter is high exhaust temperature. However, a comprehensive understanding of what variables in real DDF engine exhausts most influencing a catalytic converter performance are yet to be explored.