Search Results

In the present work is presented a detailed evaluation of an advanced diagnostic technique, developed by the authors, for the determination of diesel engine condition and tuning. For this purpose, an extended experimental investigation has been conducted on a prototype test engine installed in the author's laboratory. During the measurements various operating parameters (i.e. torque, fuel consumption, injection pressure, cylinder pressure, peripheral temperatures etc.) have been recorded at various operating conditions (i.e. engine speed and loads). Initially the engine operated at its normal conditions (i.e. reference state). Then, two “virtual” faults (i.e. reduction of injector opening pressure and increase of cylinder mass leakage) were introduced, that affected engine operation.

Cylinder pressure measurements are common practice for internal combustion reciprocating engines during field or lab applications for the purpose of combustion analysis, condition monitoring etc. The most accurate method is to measure cylinder pressure using a crank angle encoder as a trigger source to guarantee cylinder pressure measurement at predefined crank angle events. This solution, even though favorable, presents a number of practical difficulties for field applications and increased cost, for this reason its use is practically restricted to lab applications. Therefore a commonly used approach for ad hoc measurements is to digitize samples at fixed time intervals and then convert time into crank angle assuming a constant rotational speed. But if engine rotational speed is not constant within the engine cycle this may result to incorrect cylinder pressure CA referencing.