Search Results

A system for both ignition and ion current measurement was designed and set up at Istituto Motori. Particular attention was paid to the problem of dissipating the residual energy stored in the ignition coil, reducing the electromagnetic interferences and especially improving the response of the measurement system. In order to assess the capability of the ion current signal to give reliable and accurate information for knock detection, a number of tests were carried out at full load on a commercial PFI four cylinder engine, at various air/fuel ratios and spark timings. Some knock indices based on the ionization signal, both band pass filtered and non-filtered, were introduced, in particular: the Amplitude of the Second Ionization Peak (ASIP), the Mean not filtered Ionization Current signal (MIC), the Maximum Amplitude of Ionization Current signal Oscillation (MAICO), the Integral of Modulus of filtered Ionization Current signal Oscillation (IMICO).

In this work the authors present a model to simulate the in-cylinder pressure oscillations due to knock. Pressure oscillations are predicted by the explicit integration of a Partial Differential Wave Equation (PDWE) similar, in its structure, to the so-called “Equation of Telegraphy”. This equation differs mainly from the classical wave formulation for the presence of a loss term. The general solution of such equation is obtained by the Fourier method of variables separation. The integration space is a cylindrical acoustic cavity whose volume is evaluated at the knock onset. The integration constants are derived from the boundary and initial conditions. A novel approach is proposed to derive the initial condition for the derivative of the oscillating component of pressure. It descends, conceptually, from the integration of the linearized relation between the derivative of pressure versus time and the expansion velocity of burned gas.

Spark-ignited engines equipped by a three-way catalyst require a precise control of the air fuel ratio fed to the combustion chamber. A stoichiometric mixture is necessary for the proper working of the catalyst in order to meet the legislation requirement. A critical part of the air fuel ratio control is the feed-forward compensation of the fuel dynamics. Conventional strategies are based on a simplified model of the wall-wetting phenomena whose parameters are stored in off-line computed look-up tables. Unfortunately, errors in the parameters calibration over the whole engine map deteriorate the control performances in terms of emissions. In this paper an automatic procedure for a rapid and efficient identification of the wall-wetting parameters is presented. The whole procedure has been experimentally tested on a vehicle by using a test bench.