Refine Your Search

Topic

Search Results

Standard

Mobile Crane Working Area Definitions

1980-10-01
HISTORICAL
J1028_198010
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Mobile Crane Working Area Definitions

2017-08-16
WIP
J1028
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Mobile Crane Working Area Definitions

1998-10-01
CURRENT
J1028_199810
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Mobile Crane Working Area Definitions

1980-08-01
HISTORICAL
J1028_198008
This SAE Recommended Practice applies to stationary usage of mobile construction-type cranes, crawler or rubber-tire mounted, on outriggers or on tires, when used for lifting crane, clamshell, dragline, magnet, pile driver, or similar service.
Standard

Cantilevered Boom Crane Structures-Method of Test

1980-10-01
HISTORICAL
J1063_198010
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type. Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee. The purpose of this test method is to provide a systematic, nondestructive procedure for determining the stresses induced in cantilevered boom crane structures under specified conditions of static loading through use of resistance-type electric strain gages, and to specify appropriate stress levels for specified loading conditions. Further, a 25% overload test is included to prove the overall structural integrity of the structure.
Standard

Cantilevered Boom Crane Structures-Method of Test

1974-01-01
HISTORICAL
J1063_197401
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type. Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee. The purpose of this test method is to provide a systematic, nondestructive procedure for determining the stresses induced in cantilevered boom crane structures under specified conditions of static loading through use of resistance-type electric strain gages, and to specify appropriate stress levels for specified loading conditions. Further, a 25% overload test is included to prove the overall structural integrity of the structure.
Standard

Cantilevered Boom Crane Structures - Method of Test

2013-06-17
CURRENT
J1063_201306
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type (Figure 1). Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee.1
Standard

Cantilevered Boom Crane Structures-Method of Test

1993-11-18
HISTORICAL
J1063_199311
This SAE Standard applies to mobile, construction-type lifting cranes of the cantilever boom type. Questions and comments regarding application or interpretation of the provisions in this test method should be referred to the originating SAE Committee. The purpose of this test method is to provide a systematic, nondestructive procedure for determining the stresses induced in cantilevered boom crane structures under specified conditions of static loading through use of resistance-type electric strain gages, and to specify appropriate stress levels for specified loading conditions. Further, a 25% overload test is included to prove the overall structural integrity of the structure.
Standard

Latticed Crane Boom Systems--Analytical Procedure

2017-08-15
WIP
J1093
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
Standard

Latticed Crane Boom Systems--Analytical Procedure

1982-06-01
HISTORICAL
J1093_198206
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
Standard

Latticed Crane Boom Systems--Analytical Procedure

1994-03-01
HISTORICAL
J1093_199403
This SAE Information Report applies to wire rope supported, latticed crane boom systems mounted on mobile construction type cranes for lift crane service. The purpose of this document is to establish criteria for the analytical evaluation of the basic structural competence of wire rope supported latticed crane boom systems. The criteria and procedures specified include the evaluation of elastic stability for the overall boom system and individual members of the system.
Standard

Crane Hoist Line Speed and Power Test Procedure

2017-06-07
CURRENT
J820_201706
This document applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if the load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed. This recommended practice applies to all mechanical, hydraulic, and electric powered hoist mechanisms.
Standard

Crane Hoist Line Speed and Power Test Code

1998-07-01
HISTORICAL
J820_199807
This code applies primarily to mobile cranes that lift loads by means of a drum and hoist line mechanism. It can be used to determine the hoist line speed and power of other hoist line mechanisms, if load can be held constant and hoist line travel distance is sufficient for the accuracy of the line speed measurements prescribed.
Standard

Nomenclature and Dimensions for Crane Shovels

1989-06-01
HISTORICAL
J958_198906
This SAE Standard includes names of major components and parts peculiar to this type of equipment. Illustrations are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. They have been selected to depict principles used in identifying specific mechanism and to identify useful dimensional relationships.
Standard

Nomenclature and Dimensions for Crane Shovels

2003-01-21
HISTORICAL
J958_200301
This SAE Standard includes names of major components and parts peculiar to this type of equipment. The illustrations are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. They have been selected to depict principles used in identifying specific mechanisms and to identify useful dimensional relationships.
Standard

Lifting Crane, Wire-Rope Strength Factors

1991-05-01
HISTORICAL
J959_199105
This SAE Standard applies to all mobile, construction-type, lifting cranes as equipped for operation with hook, clamshell, magnet, and grapple attachments. It is not applicable to excavating and demolition attachments such as shovels, hoes, draglines, and wrecking balls. The purpose of this document is to set forth wire-rope strength factors that have been proved by design and operating practice to be consistent with safety, economy, space, weight, and other requirements peculiar to mobile, construction-type, lifting cranes.
Standard

Nomenclature and Dimensions for Crane Shovels

2012-02-06
CURRENT
J958_201202
This SAE Standard includes names of major components and parts peculiar to this type of equipment. The illustrations are not intended to show all existing commercial machines or to be exactly descriptive of any particular machine. They have been selected to depict principles used in identifying specific mechanisms and to identify useful dimensional relationships.
Standard

Lifting Crane, Wire-Rope Strength Factors

2012-06-04
CURRENT
J959_201206
This SAE Standard applies to all mobile, construction-type, lifting cranes as equipped for operation with hook, clamshell, magnet, and grapple attachments. It is not applicable to excavating and demolition attachments such as shovels, hoes, draglines, and wrecking balls. The purpose of this document is to set forth wire-rope strength factors that have been proved by design and operating practice to be consistent with safety, economy, space, weight, and other requirements peculiar to mobile, construction-type, lifting cranes.
Standard

Crane and Cable Excavator Basic Operating Control Arrangements

1998-10-01
CURRENT
J983_199810
This SAE Recommended Practice applies to mobile, construction type, crane and cable excavator hand and foot controls. It should not be construed to limit the use of, or to apply to combination controls, automatic controls, or any other special operating control requirements.
X