Search Results

In order to study the fast filling problem of large-capacity on-board hydrogen storage tank for highway passenger cars, a computational fluid dynamics (CFD) simulation model of 134L large-capacity hydrogen storage tank was established. By simulating different pre-cooling temperatures and mass flow rates, the temperature distribution and thermal transmission in the tank were observed. Due to the large ratio of length to diameter of the hydrogen tank, the temperature distribution is extremely uneven during the whole filling process, and the high temperature area is mainly concentrated in the tank tail. And the heat transfer between the gas and the tank wall is not obvious under the low and constant mass flow rate. The temperature rise process during the whole filling process under different mass flow conditions was simulated to satisfy the highest safe temperature limit.

The paper examines typical vehicle dynamics models used for the design of car-trailer active safety systems, including active trailer braking and steering. A linear 3 degree-of-freedom (DOF), a nonlinear 4 DOF and a nonlinear 6 DOF car-trailer model are generated. Then, these models are compared with a car-trailer model developed with the commercial software package, CarSim. The benchmark investigation of the car-trailer models is carried out through examining numerical simulation results obtained in two emulated tests, i.e., a single lane-change and a Fishhook maneuver. In the vehicle modeling, a mathematical model of a tire with flexible sidewalls is included to account for transient tire forces. Steady-state aerodynamic forces are included in these models. The deviation of the model dynamic responses, e.g., the variation of the articulation angle between the car and trailer, is discussed.

To date, various control strategies based on linear vehicle models have been researched and developed for improving lateral stability of car-trailer (CT) systems. Is a linear-model-based controller applicable to active safety systems for CT systems under emergency operating conditions, such as an evasive maneuver at high lateral accelerations? In order to answer the question, the applicability of an active trailer differential braking (ATDB) controller designed using a linear CT model is tested and evaluated, while the controller being applied to a CT system represented by a linear and a nonlinear CT model. The current research leads to the following insightful findings: the ATDB controller designed using the linear model can effectively improve the lateral stability of CT systems under regular evasive maneuvers at low lateral accelerations, but the controller is not applicable to CT active safety systems under emergency evasive maneuvers at high lateral accelerations.

Wind noise becomes the foremost noise source when a car runs at high speeds. High frequency characteristics of wind noise source and effective performance of seal rubbers for insulating leakage noise make research on the Transmission Loss (TL) of automotive door sealing systems significant. The improvement of TL of automotive door sealing system could effectively decrease the interior noise due to wind noise for vehicles at high speeds. In this study, compression simulation of seal rubbers for an automotive door is performed through a Finite Element (FE) tool firstly. Compressed geometries of the seal rubbers are obtained. Then, based on the final compressed geometries and pre-stress modes of the automotive door seal rubbers, the TL of the whole door sealing system is acquired by hybrid Finite Element - Statistic Energy Analysis (FE-SEA) method. The fluctuating surface pressure on a car body was captured by a Computational Fluid Dynamics (CFD) tool.

Faced with intricate traffic conditions, the single sensor has been unable to meet the safety requirements of Advanced Driver Assistance Systems (ADAS) and autonomous driving. In the field of multi-target tracking, the number of targets detected by vision sensor is sometimes less than the current tracks while the number of targets detected by millimeter wave radar is more than the current tracks. Hence, a multi-sensor information fusion algorithm is presented by utilizing advantage of both vision sensor and millimeter wave radar. The multi-sensor fusion algorithm is based on centralized fusion strategy that the fusion center takes a unified track management. At First, vision sensor and radar are used to detect the target and to measure the range and the azimuth angle of the target. Then, the detections data from vision sensor and radar is transferred to fusion center to join the multi-target tracking with the prediction of current tracks.

The conventional crash box with thin-walled column conceals some limitations on pedestrian protection and lightweight. The metallic NPR metamaterials designed in this study are based on re-entrant lattice structures. Re-entrant structures are known to be one main class of axenic structures that display negative Poisson’s ratio (NPR), which can be manufactured by 3D printing technology. This kind of metamaterial has good designability and can be used as the filling structure of the crash box to improve the crashworthiness of the car. This paper starts from the relations between geometric parameters of the metamaterial. Considering the deformation characteristics of the crash box, the structure were designed into some gradient types. The mechanical properties of different gradient structures under the same impact conditions were compared to find the proper gradient structures. Based on the studies, the gradient lattice structure is applied to the automobile crash box.

An increasing demand for vehicle noise control has been proposed and at the same time, vehicle weight and fuel economy have become critical for the automotive industry. The methodology of statistical energy analysis (SEA) is used to balance both light weight and high noise insulation performance. In this paper, the vehicle dash and floor sound package systems, which are two of the major paths for vehicle interior noise, are studied and optimized by CAE and testing technology. Two types of sound packages which are the conventional insulation system and the lightweight one are chosen for the vehicle dash and floor system. The vehicle dash and floor systems are modeled by SEA and the transmission loss (TL) of the dash and floor system is analyzed, respectively. Several influence factors of the TL are also analyzed, such as sound package coverage, the leaks, etc.

Slip or relative rotation between the tire and rim is a significant concern for vehicle operation and wheel manufacturing since it leads to wheel imbalance and vibration as well as power losses. A slip situation typically occurs due to improper bead lubrication and mounting, irregularities in the bead seat, and extreme loading conditions with high torques and low tire pressures. Currently, there are relatively few published studies on the tire-rim interface, and they mainly focus on topics such as the mounting process, load transfer, and friction modelling. This leaves a gap to explore the measurement and variation of gross tire-rim slip under the dynamic conditions of a driven tire. In this paper, a previously developed and validated FEA truck tire model was modified to include a frictional contact surface between the tire and rim, and then the slip ratio between the tire and rim was measured under different operating conditions.

Recently, several datasets have become available for occupant monitoring algorithm development, including real and synthetic datasets. However, real data acquisition is expensive and labeling is complex, while virtual data may not accurately reflect actual human physiology. To address these issues and obtain high-fidelity data for training intelligent driving monitoring systems, we have constructed a hybrid dataset that combines real driving image data with corresponding virtual data generated from 3D driving scenarios. We have also taken into account individual anthropometric measures and driving postures. Our approach not only greatly enriches the dataset by using virtual data to augment the sample size, but it also saves the need for extensive annotation efforts. Besides, we can enhance the authenticity of the virtual data by applying ergonomics techniques based on RAMSIS, which is crucial in dataset construction.