Refine Your Search

Topic

Search Results

Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2004-03-18
HISTORICAL
J2417_200403
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

1998-06-01
HISTORICAL
J2417_199806
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle- boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted. The purpose of the SAE document is to establish a consistent, repeatable means of determining the lift capacity for the types of equipment contained therein.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2009-08-31
HISTORICAL
J2417_200908
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in SAE J1209 and SAE J2055 and certain forestry equipment defined in SAE J1209 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

Lift Capacity Calculation Method Knuckle-Boom Log Loaders and Certain Forestry Equipment

2014-10-21
CURRENT
J2417_201410
This SAE Standard provides a uniform method to calculate the lift capacity of knuckle-boom log loaders and certain forestry equipment. It establishes definitions and specifies machine conditions for calculations. This document applies to knuckle-boom log loaders as defined in ISO 6814 and ISO 17591 and certain forestry equipment defined in ISO 6814 that have a rotating upper-structure such as feller bunchers, forwarders, harvesters, and behind the cab or rear-mounted knuckle-boom log loaders not having their own power supply. It does not apply to harvesters that are incapable of lifting a tree or log completely off the ground. This document applies to those machines that are crawler, rubber-tired, and pedestal or stationary mounted.
Standard

Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors

1995-06-01
HISTORICAL
J1014_199506
This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057; J1116; and J1209. Specifically excluded are those winches used for hoisting operations. This document classifies the major types of winch and establishes nomenclature for major winch components. Examples used here are not intended to include all existing winches nor to be descriptive of any particular winch.
Standard

Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors

1977-06-01
HISTORICAL
J1014_197706
This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057; J1116; and J1209. Specifically excluded are those winches used for hoisting operations. This document classifies the major types of winch and establishes nomenclature for major winch components. Examples used here are not intended to include all existing winches nor to be descriptive of any particular winch.
Standard

Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors

2004-05-19
HISTORICAL
J1014_200405
This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057; J1116; and J1209. Specifically excluded are those winches used for hoisting operations. This document classifies the major types of winch and establishes nomenclature for major winch components. Examples used here are not intended to include all existing winches nor to be descriptive of any particular winch.
Standard

Operator Protective Structure Performance Criteria for Certain Forestry Equipment

1980-04-01
HISTORICAL
J1084_198004
This SAE Recommended Practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees. Structures meeting these performance criteria may not provide complete operator protection under all conceivable circumstances, but they are expected to minimize the possibility of operator injury under reasonable operating situations. The performance requirements and test criteria included in this document are derived from investigations on operator protection that has performed the intended function in a variety of actual operating conditions. This document is intended to establish a consistent, repeatable means of evaluating Operator Protective Structures (OPS) on skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees.
Standard

Operator Protective Structure Performance Criteria for Certain Forestry Equipment

2008-04-21
CURRENT
J1084_200804
This SAE Recommended Practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees. Structures meeting these performance criteria may not provide complete operator protection under all conceivable circumstances, but they are expected to minimize the possibility of operator injury under reasonable operating situations. The performance requirements and test criteria included in this document are derived from investigations on operator protection that has performed the intended function in a variety of actual operating conditions. Objective This document is intended to establish a consistent, repeatable means of evaluating Operator Protective Structures (OPS) on Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees.
Standard

Operator Protective Structure Performance Criteria for Certain Forestry Equipment

2002-09-05
HISTORICAL
J1084_200209
This SAE Recommended Practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees. Structures meeting these performance criteria may not provide complete operator protection under all conceivable circumstances, but they are expected to minimize the possibility of operator injury under reasonable operating situations. The performance requirements and test criteria included in this document are derived from investigations on operator protection that has performed the intended function in a variety of actual operating conditions. Objective This document is intended to establish a consistent, repeatable means of evaluating Operator Protective Structures (OPS) on Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees.
Standard

Operator Protective Structure Performance Criteria for Certain Forestry Equipment

1975-11-01
HISTORICAL
J1084_197511
This SAE Recommended Practice establishes the test procedures and minimum performance criteria necessary to fulfill the intended purpose and is applicable to Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees. Structures meeting these performance criteria may not provide complete operator protection under all conceivable circumstances, but they are expected to minimize the possibility of operator injury under reasonable operating situations. The performance requirements and test criteria included in this document are derived from investigations on operator protection that has performed the intended function in a variety of actual operating conditions. Objective This document is intended to establish a consistent, repeatable means of evaluating Operator Protective Structures (OPS) on Skidders, Grapple Skidders, and Crawlers when used in the harvesting of trees.
Standard

Specification Definitions - Clam Bunk Skidder

1998-07-21
HISTORICAL
J1824_199807
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe high-speed steel track and articulated rubber-tired clam bunk skidders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer. The purpose of this SAE document is to establish a uniform method of identifying and defining the specifications most commonly used to compare various models of this type of equipment.
Standard

Specification Definitions-Clam Bunk Skidder

2004-05-18
HISTORICAL
J1824_200405
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe high-speed steel track and articulated rubber-tired clam bunk skidders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer. The purpose of this SAE document is to establish a uniform method of identifying and defining the specifications most commonly used to compare various models of this type of equipment.
Standard

Specification Definitions--Clam Bunk Skidder

2009-03-06
HISTORICAL
J1824_200903
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe high-speed steel track and articulated rubber-tired clam bunk skidders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer. The purpose of this SAE document is to establish a uniform method of identifying and defining the specifications most commonly used to compare various models of this type of equipment.
Standard

Specification Definitions - Clam Bunk Skidder

2013-02-11
CURRENT
J1824_201302
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe high-speed steel track and articulated rubber-tired clam bunk skidders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer.
Standard

Specification Definitions-Articulated Rubber-Tired Forwarder

1991-06-01
HISTORICAL
J1823_199106
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe articulated rubber-tired forwarders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer.
Standard

Specification Definitions-Articulated Rubber-Tired Forwarder

2003-07-17
CURRENT
J1823_200307
This SAE Recommended Practice identifies and defines the specifications most commonly used to describe articulated rubber-tired forwarders. The illustrations used are not intended to be descriptive of any existing machine or dictate a combination needed for a particular logging situation. The dimensions indicated are basic and may be supplemented by the individual machine manufacturer.
X