Search Results

In order to extend the operability limit of the gasoline compression ignition (GCI) engine, as an avenue for low temperature combustion (LTC) regime, the effects of parametric variations of engine operating conditions on the performance of six-stroke GCI (6S-GCI) engine cycle are numerically investigated, using an in-house 3D CFD code coupled with high-fidelity physical sub-models along with the Chemkin library. The combustion and emissions were calculated using a skeletal chemical kinetics mechanism for a 14-component gasoline surrogate fuel. Authors’ previous study highlighted the effects of the variation of injection timing and split ratio on the overall performance of 6S-GCI engine and the unique mixing-controlled burning mode of the charge mixtures during the two additional strokes. As a continuing effort, the present study details the parametric studies of initial gas temperature, boost pressure, fuel injection pressure, compression ratio, and EGR ratio.

The flamelet model is a widely used combustion model that demonstrates a good prediction of non-premixed combustion. In this model, the chemical time scales are considered to be smaller compared to those of the turbulence, which allows the heat and mass transfer equation to be decoupled from the flow equation. However, the model's dependency on the mixture fraction limits the combustion analysis to a single injection. To overcome this limitation, a two dimensional flamelet model, which uses two mixture fraction variables, was introduced to represent the non-premixed combustion of multiple injections. However, the model's computational time drastically increased due to the expansion of the solution domain. Thus, a modified 2-D flamelet model was introduced to reduce the computational time of the two dimensional flamelet model.

For vehicles with internal combustion engines, tailpipe emissions heavily rely on the aftertreatment system, typically a catalytic converter. Modern three-way catalysts (TWC) can very effectively convert the unburnt hydrocarbons (HC), CO, and NOx into non-harmful gases such as H2O, CO2, and N2 when the catalyst brick reaches a relatively high temperature. However, before that catalyst light-off temperature is reached, the emissions conversion efficiency is low, leading to high tailpipe emissions. Due to this light-off temperature requirement of the catalytic converter, the emissions from the engine cold-start period contributes a significant portion of vehicle overall emissions. One of the major reasons for high emissions during cold start is low combustion chamber wall temperatures, lower than the initial boiling temperature of gasoline fuel. This results in fuel film formation, and significantly incomplete evaporation prior to combustion.