Search Results

Titanium is a difficult material to fabricate into complex configurations. There is several elevated temperature forming processes available to produce titanium components for aerospace applications. The processes to be discussed are Superplastic Forming (SPF), hot forming and creep forming. SPF uses a tool that contains the required configuration and seals around the periphery so inert gas pressure can be used to form the material. Of the processes to be discussed, this is the one that can produce the most complex shapes containing the tightest radii. A variation of the process combines an SPF operation with diffusion bonding (SPF/DB) of two or more pieces of titanium together to produce integrally stiffened structure containing very few fasteners. Another process for shaping titanium is hot forming. In this process, matched metal tools, offset by the thickness of the starting material, are used to form the part contour at elevated temperature.

We live in an era of increasing twin-engine commercial airplane operations, with large and very quiet high bypass ratio engines. At the same time, due to several decades of increased attention to the environment, we have large and increasing hazardous species bird populations. These trends, when combined, are not a prescription for continued assurance of a remarkable and enviable safety record for commercial aviation. Therefore, greater diligence must be placed on the evaluation of the current and future aviation wildlife hazard. We have some new weapons in this fight for greater capability to live with this situation. The basic problem is that different databases are populated independently from one another and often contain conflicting, contradictory, and erroneous data. Databases that were used individually, but not necessarily combined, are being utilized in a conjoined methodology to give us a better picture of the actual risk involved.

Current methods of life cycle assessment (LCA) include input-output (IO) models and process-based LCA. These methods either require excessive effort and time to reach a conclusion (process LCA) or do not adequately model how a change in a product's design will affect the environmental footprint (IO LCA). A variation of process-based LCA developed specifically for aircraft is presented in this study. A tool implementing this LCA, “qUWick,” is rapid and easily applicable to multi-disciplinary design optimization of aircraft. Models developed for the material production, manufacturing, usage, and end-of-life of an aircraft are examined. Outputs of qUWick are discussed for future air vehicles. When compared to process LCAs with similar boundaries, qUWick gives similar results, however qUWick models several stages of an aircraft's life cycle more accurately than other aircraft process-based LCAs.

The use of portable automated equipment has increased in recent years with the introduction of flex track, crawling robots, and other innovative machine configurations. Portable automation technologies such as these lower infrastructure costs by minimizing factory floor space requirements and foundation expenses. Portable automation permits a higher density of automated equipment to be used adjacent to aircraft during assembly. This equipment also allows concurrent work in close proximity to automated processes, promotes flexibility for changes in rate, build plan, and floor space requirements throughout the life of an airplane program. This flexibility presents challenges that were not encountered with traditional fixed machine drilling centers. The work zone surrounding portable machines is relatively small, requiring additional setup time to relocate and position machines near the airframe.

Boeing has relied upon the 767 ASAT (ASAT1) since 1983 to fasten the chords, stiffeners and rib posts to the web of the four 767 wing spars. The machine was originally commissioned with a Terra five axis CNC control. The Terra company went out of business and the controls were replaced with a custom DOS application in 1990. These are now hard to support so Boeing solicited proposals. Electroimpact proposed to retrofit with a Fanuc 31I CNC, and in addition, to replace all associated sensors, cables and feedback systems. This work is now complete on two of the four machines. Both left front and right front are in production with the new CNC control.

One of the most common damages occurred found on commercial airframes are dents and gouges. The usual repair for these damages includes installation of metallic doublers with rivets or with hi-loks. Sometimes these doublers are of complex design, because of multiple angles of the original damaged skin. Many times the damages are in hard to reach areas. In these cases the traditional metallic doubler repairs are not only time consuming and but also expensive. As the numerous holes are be drilled through the original structure, its fatigue life is adversely affected. For airline operators, time is valuable and they cannot afford to lose revenue by spending longer time for repairs. The use of bonded composite doublers offers the airframe manufacturers and aircraft repair facilities an alternative repair process that alleviates the abovementioned concerns.

Parallel kinematic mechanisms (PKMs) offer advantages of high stiffness to mass ratios, greater potential for accuracy and repeatability, and lower cost when compared to traditional assembly machines. Because of this, there is a strong interest in using PKMs for aerospace assembly and joining operations. This paper looks at the calibration of a prototype Gantry TAU robot by extending the higher-order implicit loop calibration techniques developed for serial link mechanisms to parallel link mechanisms. The kinematic model is based on the geometric model proposed by Dressler et al., augmented with a cubic spline error model of the motion errors for each of the three translation actuators resulting in 185 parameters. Measurements are taken with a 6-DOF laser tracker, and the kinematic parameters are solved as the maximum likelihood parameter estimate.

Engineering plastics are now available for use on lightly loaded aircraft structure. These materials have excellent cost benefits as well as producibility benefits over their hand laidup predecessors. They are especially useful in the strut and nacelle areas where many of the fairings are attached for aerodynamic purposes only and may have rather complicated contours. In addition to lower costs, the manufacturing process is consistent, unlike hand laidup parts, which often require rework. In the strut and nacelle area one of the major requirements for all parts is sonic durability. This paper is intended to explain the test setup and test procedure for sonic testing of thermoplastics and thermosets and the results of the testing up to this point. Included in this explanation will be the assumptions made, the test setup, results of the testing and conclusions drawn from the testing.

Boeing needed a process to replace hand drilling for floor panel holes and galley and lavatory mounting locator holes in the floor grid of the completed 737 fuselage. Electroimpact developed a process, and the 737 AFDE machine, that is a substantial improvement over existing technology. It provides full CNC control, quick reconfiguration of hole patterns, fast drilling of up to 3000 holes in one 8-hour shift, drills both titanium and aluminum and works inside the fuselage.

International Space Station (ISS) will provide Low Temperature (LT), and Moderate Temperature (MT) Internal Thermal Control System (ITCS) coolant to payloads and other users. LT ITCS delivers 38° to 42° F coolant MT ITCS delivers 62° to 65° F coolant. By using LT ITCS cabin air, dew point is controlled by the Thermal and Humidity Control (THC) subsystem to be 49° to 55° F when manned. Since the dew point temperature is above the LT ITCS nominal temperature, any components that have this coolant in them can be expected to condense moisture on their surfaces. The components that are affected are many. This paper, however, is concerned only with the lines and Quick Disconnects (QDs) that are a part of the total ITCS system.

To investigate LSS an EXCEL Spreadsheet is designed. The spreadsheet consists of data on two different LSS types: biological and physico-chemical. Biological LSS include those based on hydrogen-oxidizing bacteria, microalgae, higher plants, higher plants and mushrooms, and higher plants with physical/chemical incineration of wastes. Simulations using this spreadsheet, showed that LSS with higher plants realize different structure of LSS (ratio of biological species, their mass, etc.) with different operation time. Thus, the system with higher plants has been found to have three different structures if incineration is used and six structures in opposite case. In the case of a vegetarian diet, 100% closure can be obtained.

Eight SUMMA passivated sampling canisters were shipped to the Russian Space Station Mir in February of 1995 to assess ambient trace contaminant concentrations. Prior to flight, the canisters were injected with isotope labeled surrogates and internal standards to measure potential negative impacts on measurement accuracy caused by the trip environmental conditions of launch and return. Three duplicate canister samples were collected in parallel with Russian sorbent samples to acquire data for comparative purposes. A total of 32 target and 13 non-target volatile compounds were detected in each of the samples analyzed. The concentrations of the compounds remained relatively consistent for the three sampling events, and all of the concentrations of detected contaminants were well below both US and Russian Spacecraft Maximum Allowable Concentrations (SMAC). Five different fluorocarbons were consistently detected at relatively high concentrations.

A new look at tactical combat V/STOL design and utility as affected by emerging technology and mission concepts is given in this paper. History has shown that a certain level of useful load fraction must be attained before an airplane system can be considered operationally successful. Technology trends reviewed in this paper suggest that the time is here or at least near for V/STOL tactical aircraft to achieve a truly viable useful load fraction. Propulsion, structure, and controls technologies will contribute to the success of the tactical V/STOL system. In addition, aerodynamic technology as related to interference effects in hover and transition, and as required for efficient supersonic cruise and combat, significantly impacts the design solution. A unique approach to system design risk assessment is described with results giving technology leverage as a function of design options.

The re-invention of the global aviation industry is well underway. This dramatic change is being achieved through the use of emergent technology to facilitate a progressive disintermediation of traditional aviation business solutions and services. This progressive disintermediation will continue unabated as this technology is adopted and deployed within the aviation industry. The challenge and opportunity is to whom will lead this re-invention and how will it be accomplished. The integrated use of rapidly evolving technology (Blockchain, IoT, Artificial Intelligence, 5G Cellular Technology and Mobile Edge Computing) is facilitating an integrated more industry cooperative approach enabling this progressive disintermediation.

The formation of ice over lifting surfaces can affect aerodynamic performance. In the case of helicopters, this loss in lift and the increase in sectional drag forces will have a dramatic effect on vehicle performance. The ability to predict ice accumulation and the resulting degradation in rotor performance is essential to determine the limitations of rotorcraft in icing encounters. The consequences of underestimating performance degradation can be serious and so it is important to produce accurate predictions, particularly for severe icing conditions. The simulation of rotorcraft ice accretion is a challenging multidisciplinary problem that until recently has lagged in development over its counterparts in the fixed wing community. But now, several approaches for the robust coupling of a computational fluid dynamics code, a rotorcraft structural dynamics code and an ice accretion code have been demonstrated.

With the increasing usage of composites for aerodynamic surfaces, the use of bonded composite repair processes are becoming more common. The repair process remains a largely manual process, with repair technicians scarfing or stepping, tracing the plies, fabricating repair patches and finally bonding the patch. The patch fabrication process becomes increasingly tedious and tiring due to cutting and tracing of each individual ply twice for thermal surveying and the final repair patch. We have developed a system that can replace the tracing and cutting components of the fabrication process using low cost, commercial off the shelf (COTS) tools. We present the ply boundary extraction method used and detail the nesting algorithm used to produce the final plies. Our software is benchmarked against the manual process with a list of successfully cut materials using a low cost fabric cutter with a steel drag blade.

Flight in icing for transport category aircraft certification presents a particularly challenging set of considerations to establish adequate safety commensurate with the associated risk while balancing design complexity and efficiency. A review highlighting important aspects of the regulatory evolution and guiding principles for flight in icing certification is presented, including the current standards and recent rulemaking activity.

Determining local ice crystal icing concentration factors in the region of the forward fuselage is critical for setting the Total Water Content levels for air data probe qualification testing. Simulation, modeling, and testing techniques for this concentration-factor phenomenon are still in their infancy, and there is currently not a significant amount of this type of analysis in the literature. A representative, 3D analysis was conducted using transport airplane geometry and flight conditions that explored the sensitivities resulting from parametric changes to flight and ice crystal icing conditions, particle modeling parameters, and bouncing effects.

Over the next twenty years, the role and contributions of successfully managed projects will continue to grow in importance to aerospace organizations, especially considering the demands of emerging markets. The accompanying challenges will be how to effectively reduce product and process cost where known (incremental) and unknown (transformational) technological innovation is required. Managing Aerospace Projects brings together ten seminal SAE technical papers that support the vision of a more holistic and integrated approach to highly complex projects. Using the concept of project management levers, Dr.

This book provides an introduction to the role, value, scope and the unique contributions the field of human factors can bring to the design process for all products. Aimed at the engineer and manager with no formal training in the life and social sciences, it is not intended to train the methods of human factors, but rather to provide knowledge that will enable engineers and managers to determine if including human factors in the planning and execution of product design is justified. Chapters include: Reasons Engineers Provide for Limiting Emphasis on Human Factors The Academic Disciplines Supporting Human Factors Human Factors Engineering and more