Standard
Wrenches, Twelve Spline, Inch
2002-05-22
WIP
AS8982
Search Results
Standard
Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric
2013-02-10
CURRENT
MA4535A
This SAE Metric Aerospace Standard (MA) provides dimensional, performance, testing and other requirements for high strength, thin wall, double head box and combination wrenches which possess an internal wrenching design so configured that, when mated with hexagon (6 point) fasteners, they shall transmit torque to the fastener without bearing on the apex of the fastener’s wrenching points. This standard provides additional requirements beyond ANSI B107.9 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard
Wrenches, Box and Open End Combination Twelve Point, High Strength, Thin Wall, Metric
2004-01-23
HISTORICAL
MA4535
This SAE Metric Aerospace Standard (MA) provides dimensional, performance, testing and other requirements for high strength, thin wall, double head box and combination wrenches which possess an internal wrenching design so configured that, when mated with hexagon (6 point) fasteners, they shall transmit torque to the fastener without bearing on the apex of the fastener's wrenching points. This standard provides additional requirements beyond ANSI B107.9 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard
Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners
2019-05-10
CURRENT
AIR1936A
This study addresses the adequacy of sockets, wrenches, and torque adapters conforming to AS954 to wrench 12 point fasteners with wrenching configurations conforming to AS870C. Reported wrenching problems with smaller sizes are investigated through examining the combined tolerances on the fasteners and wrenches, conducting torque testing on typical high strength lock nuts. Possible solutions to correct these wrenching problems are presented.
Standard
Socket Wrenches, Hand (Metric)
2004-01-23
HISTORICAL
MA4534
This SAE Aerospace Standard covers high strength commercial sockets and universal sockets which possess the strength, clearances, and internal wrenching design so configured that, when mated with hexagon (6 point) fasteners, they shall transmit torque to the fastener without bearing on the outer 5% of the fastener's wrenching points. This document provides additional requirements beyond ANSI B107.5 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard
Requirements for Alternative Coatings Used in Lieu of Nickel-Chromium Plating for Aerospace Hand Tools
2004-01-23
HISTORICAL
ARP5130
This SAE Aerospace Recommended Practice (ARP) covers the requirements for alternative coatings used in lieu of nickel-chromium plating and the surface finish requirements for aerospace hand tools. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
Standard
Requirements for Alternative Coatings Used in Lieu of Nickel-Chromium Plating for Aerospace Hand Tools
2009-02-03
CURRENT
ARP5130A
This SAE Aerospace Recommended Practice (ARP) covers the requirements for alternative coatings used in lieu of nickel-chromium plating and the surface finish requirements for aerospace hand tools. It is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.
Standard
RECOMMENDATIONS FOR SELECTION AND USE OF TORQUE WRENCHES FOR AEROSPACE PROPULSION SYSTEMS APPLICATIONS
2003-05-15
CURRENT
AIR1268
This report covers torque indicating and limiting devices, also referred to as torque wrenches or torque handles, accessories used to obtain predetermined torque values on nuts, bolts, plumbing, related fasteners and friction of rotating parts, etc; calibration equipment and recommended schedules; proper use of tools and chronic torque problems.
Standard
Metric Wrenches: Nondistorting Flare Nut
2004-01-23
HISTORICAL
MA4360
This SAE Aerospace Standard (AS) covers open box end flare nut wrenches. These wrenches are designed for nondistorting usage by transmitting torque to tube fittings without bearing on the apex of the fitting wrenching surfaces.
Standard
BIT, SCREWDRIVER, PHILLIPS, RIBBED, CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK, POWER DRIVEN
2013-09-19
CURRENT
AS85643/2A
Standard
BIT, SCREWDRIVER, PHILLIPS, RIBBED, CRUCIFORM, LONG SHANK, EXTERNAL HEXAGON SHANK, POWER DRIVEN
2004-01-23
HISTORICAL
AS85643/2
Standard
Driver Drills Battery Powered
2004-01-23
HISTORICAL
AS4786
This SAE Aerospace Standard (AS) covers variable speed, reversible 0.375 (3/8) in chuck battery powered drills, with removable, rechargeable battery pack, used for general maintenance and construction where a battery powered tool is required. When electromagnetic interference (EMI) suppression is required by the purchaser, this document satisfies EMI requirements for driver drills. This document may involve hazardous materials, operations, or equipment. This document does not purport to address all the safety problems associated with its use. It is the responsibility of the user of this equipment to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer's instructions prior to use.
Standard
Driver Drills, Battery Powered
2011-03-30
HISTORICAL
AS4786A
This SAE Aerospace Standard (AS) covers variable speed, reversible battery powered drills with removable, rechargeable battery pack and either 3/8 inch or ½ inch chuck used for general maintenance and construction where a battery powered tool is required. This document also satisfies EMI requirements for driver drills, where EMI suppression is required by the purchaser. This document may involve hazardous materials, operations, or equipment and does not purport to address all of the safety considerations associated. It is the responsibility of the user of a piece of equipment to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer’s instructions prior to use.
Standard
Driver Drills, Battery Powered
2017-01-04
CURRENT
AS4786B
This SAE Aerospace Standard (AS) covers variable speed, reversible battery powered drills with removable, rechargeable battery pack and either 3/8 inch or ½ inch chuck used for general maintenance and construction where a battery powered tool is required. This document also satisfies EMI requirements for driver drills, where EMI suppression is required by the purchaser. This document may involve hazardous materials, operations, or equipment and does not purport to address all of the safety considerations associated. It is the responsibility of the user of a piece of equipment to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to its use. Users are cautioned to read all manufacturer’s instructions prior to use.
Standard
Handles and Attachments for Hand Socket Wrenches
2017-12-07
HISTORICAL
AS4283C
This SAE International Standard covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ASME B107.110, Category 10 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard
Handles and Attachments for Hand Socket Wrenches
2011-12-12
HISTORICAL
AS4283B
This SAE International Standard covers handles and attachments for use with sockets and crowfoot wrenches in aerospace applications involving high torque, limited clearances, and generally clean conditions. This document provides additional requirements beyond ASME B107.10 appropriate for aerospace use. Inclusion of dimensional data in this document is not intended to imply all of the products described therein are stock production sizes. Consumers are requested to consult with manufacturers concerning lists of stock production sizes.
Standard
Wrenches, Hand Twelve Point High Strength, Thin Wall
2004-01-23
HISTORICAL
AS954E
Standard
Aerospace Signaling Torque Wrenches
2011-02-21
HISTORICAL
AS28431
This Society of Automotive Engineers (SAE) Aerospace Standard covers requirements for micrometer adjustable, feel impulse, torque wrenches. The torque wrench is used to apply a pre-set torque to threaded fasteners and other torque requirements.
Standard
Coating Requirements for Aerospace Hand Tools
2004-01-23
HISTORICAL
AS4984
This SAE Aerospace Standard (AS) covers requirements for nickel-chromium coatings, black oxide or black phosphate coatings, and alternate coatings for aerospace hand tools.
Standard
Coating Requirements for Aerospace Hand Tools
2011-07-08
HISTORICAL
AS4984A
This SAE Aerospace Standard (AS) covers requirements for nickel-chromium coatings, black oxide or black phosphate coatings, and alternate coatings for aerospace hand tools.
