Search Results

Vehicle occupants undergo upward and outward excursion during the airborne phase of vehicle rollover due to the inertial effects coming from the vehicle's rotation. When this excursion is sufficient to permit contact between the occupant's head and the vehicle's interior roof panel, the neck may experience compressive loading. This compressive loading, generated during the airborne phase and prior to vehicle-to-ground impact, could render the occupant more susceptible to compressive neck injury during subsequent vehicle-to-ground impacts. In the present study, computational simulations were used to evaluate the effect of steady-state roll rate on compressive preloading in the cervical spine. The results show an increasing relationship between roll rate and compressive preloading when the head contacts the roof panel and becomes constrained.

Anthropomorphic test dummies (ATDs) have been validated for the analysis of various types of automobile collisions through pendulum, impact, and sled testing. However, analysis of the fidelity of ATDs in rollover collisions has focused primarily on the behavior of the ATD head and neck in axial compression. Only limited work has been performed to evaluate the behavior of different surrogate models for the analysis of occupant motion during rollover. Recently, Moffatt et al. examined head excursions for near- and far-side occupants using a laboratory-based rollover fixture, which rotated the vehicle about a fixed, longitudinal axis. The responses of both Hybrid III ATD and human volunteers were measured. These experimental datasets were used in the present study to evaluate MADYMO ATD and human facet computational models of occupant motion during the airborne phase of rollover.

While previous studies have recognized and demonstrated the upward and outward occupant motion that occurs during the airborne phase of rollover and estimated the resulting head excursion using static and dynamic approaches, the effect of roll rate on restrained occupant head excursion has not been comprehensively evaluated. Moffatt and colleagues recently examined head excursions for near- and far-side occupants resulting from steady-state roll velocities using a laboratory fixture and both Hybrid III anthropomorphic test dummies (ATD) and human volunteers. To expand upon that study, a MADYMO computational model of a rolling airborne vehicle was developed to more thoroughly evaluate the effects of roll rate on occupant kinematics and head excursion. The interior structure of the vehicle used by Moffatt et al. was modeled, and the ATD kinematics observed in that experimental study were used to validate the computational models of the current study.

The mechanics of on-road, friction-induced rollovers were studied with the aid of a three-dimensional computer code specifically derived for this purpose. Motions of the wheels, vehicle body, occupant torso, and head were computed. Kane's method was utilized to develop the dynamic equations of motion in closed form. On-road rollover kinematics were compared to a dolly-type rollover at lesser initial speed, but generating a similar roll rotation rate. The simulated on-road rollover created a roof impact on the leading (driver's) side, while the dolly rollover simulation created a trailing-side roof impact. No head-to-roof contacts were predicted in either simulation. The first roof contact during the dolly-type roll generated greater neck loads in lateral bending than the on-road rollover. This work is considered to be the first step in developing a combined vehicle and occupant computational model for studying injury potential during rollovers.