This SAE information report is intended to provide design guidance in the selection of stainless steel tubing produced from SAE 304/304L stainless material as defined by SAE J3127, J3128, J3129, and J3135.
A bolt-load retention (BLR) test is a practical test to determine the bolt load of a fastener joint with time and at given temperatures. There are three types of BLR tests described in this standard, namely general-purpose test, design-purpose test, and screening material test. A general-purpose BLR test may be used for screening materials, while a design-purpose BLR test is usually used to verify the BLR behavior of a specific joint. The screening material test is an example of the general-purpose test for typical automotive applications.
A bolt-load retention (BLR) test is a practical test to determine the bolt load of a fastener joint with time and at given temperatures. There are three types of BLR tests described in this standard, namely general-purpose test, design-purpose test, and screening material test. A general-purpose BLR test may be used for screening materials, while a design-purpose BLR test is usually used to verify the BLR behavior of a specific joint. The screening material test is an example of the general-purpose test for typical automotive applications.
This SAE Standard specifies: a test method for assessing the lubricating property of diesel fuels including those which may contain a lubricity enhancing additive, and the performance criteria necessary to ensure reliable operation of diesel fuel injection equipment with respect to fuel lubrication of such equipment. It applies to fuel used in diesel engines.
This document summarizes published measurement data and reference values for marker chemical compounds listed in ARP4418 (see 2.1.1) potentially found in aircraft engine bleed air.
This guide is intended to cover test procedures applicable to MAP transducers; it is also applicable to transducers such as Barometric (Ambient) Absolute Pressure transducers, Manifold Vacuum transducers, and similar pressure transducers used in automotive systems. Although oriented towards active devices (those using internal signal conditioning), it can be applied to passive devices with minor modifications.
This SAE Recommended Practice defines the blade fuse styles, test conditions, procedures, and performance requirements for use in vehicle electrical power systems designed to the new motor vehicle industry 42 V architecture. The intent of this document is to provide a framework for 58 V Blade Fuse characteristics, serving the motor vehicle industry to establish standardization with respect to electrical performance and mechanical requirements. This standardization shall lend itself to safe application practices; e.g., prevention of 32 V devices utilized inappropriately in 42 V electrical systems. Both the performance and mechanical requirements expressed herein are for the advancement of mobility engineering and the development of safe application practices. They are not intended for the establishment of design exclusions, patent rights, or franchising that engenders restraint of trade.