Search Results

Standard

LOCK WASHERS

1974-02-01

HISTORICAL

J489B_197402

This SAE Standard covers the complete dimensional and general specifications, including physical properties and methods of testing, for those types of lock washers intended for use in automotive and general industrial applications.

Standard

SPRING NUTS

1964-08-01

HISTORICAL

J891_196408

Standard

Protective Coatings for Fasteners

2019-10-07

CURRENT

J1648_201910

This SAE Information Report is provided as an advisory guide. Careful discretion as to application is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. It covers finishes applied to fasteners and related topics, corrosion resistance, lubricity, electrical grounding, ultraviolet light, and embrittlement. Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications. Application of protective coatings will affect fastener dimensions. This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. Explanation is covered in Section 5.

Standard

PROTECTIVE COATINGS FOR FASTENERS

1996-08-01

HISTORICAL

J1648_199608

This SAE Information Report is provided as an advisory guide. Careful discretion as to application is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. It covers finishes applied to fasteners and related topics, corrosion resistance, lubricity, electrical grounding, ultraviolet light, and embrittlement. Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications. Application of protective coatings will affect fastener dimensions. This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. Explanation is covered in Section 5.

Standard

Protective Coatings for Fasteners

2013-04-15

HISTORICAL

J1648_201304

This SAE Information Report is provided as an advisory guide. Careful discretion as to application is recommended. The content has been presented as accurately as possible, but responsibility for its application lies with the user. It covers finishes applied to fasteners and related topics, corrosion resistance, lubricity, electrical grounding, ultraviolet light, and embrittlement. Table 1 lists these coatings and their properties so that finish selection can be reasonably made in accordance with known and anticipated fastener assembly applications. Application of protective coatings will affect fastener dimensions. This is especially critical for the thread fit of mating parts because the pitch diameter increases by four times the coating thickness. Explanation is covered in Section 5.

Standard

Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series

2019-08-07

CURRENT

J174_201908

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque-type threaded steel fasteners 1/4 through 1 in nominal diameters. Realistically torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the metric version, see SAE J174M.

Standard

TORQUE-TENSION TEST PROCEDURE FOR STEEL THREADED FASTENERS

1971-04-01

HISTORICAL

J174_197104

This test procedure is intended to provide a standard method for checking torque-tension relationships of nonprevailing torque type threaded steel fasteners 1/4 through 1 in nominal diameters.

Standard

Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series

2013-04-11

HISTORICAL

J174_201304

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque-type threaded steel fasteners 1/4 through 1 in nominal diameters. Realistically torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the metric version, see SAE J174M.

Standard

TORQUE-TENSION TEST PROCEDURE FOR STEEL THREADED FASTENERS—INCH SERIES

1998-05-01

HISTORICAL

J174_199805

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque-type threaded steel fasteners 1/4 through 1 in nominal diameters. Realistically, torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the metric version, see SAE J174M.

Standard

TORQUE-TENSION TEST PROCEDURE FOR STEEL THREADED FASTENERS—METRIC SERIES

1998-05-01

HISTORICAL

J174M_199805

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque-type threaded steel fasteners 6 through 24 mm nominal diameters. Realistically, torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the inch series version, see SAE J174.

Standard

Torque-Tension Test Procedure for Steel Threaded Fasteners - Metric Series

2013-04-11

HISTORICAL

J174M_201304

This test procedure is intended to provide a quality control method for checking torque-tension characteristics of non-prevailing torque-type threaded steel fasteners 6 through 24 mm nominal diameters. Realistically, torque-tension relationships for specific individual fastener assembly joints will vary due to the different joint parameters. Tests using actual joint components will be required to determine accurate torque-tension values for those conditions. For the inch series version, see SAE J174.

Standard

Nut and Conical Spring Washer Assemblies

2013-04-15

HISTORICAL

J238_201304

This SAE Standard covers general, dimensional data, and methods of test for two types of general purpose nut and conical spring washer assemblies, designated Type LN and Type HN, intended for mass production and other operations where speed and convenience are paramount factors.

Standard

NUT AND CONICAL SPRING WASHER ASSEMBLIES

1998-05-01

HISTORICAL

J238_199805

This SAE Standard covers general, dimensional data, and methods of test for two types of general purpose nut and conical spring washer assemblies, designated Type LN and Type HN, intended for mass production and other operations where speed and convenience are paramount factors.

Standard

Nut and Conical Spring Washer Assemblies

2017-05-30

CURRENT

J238_201705

This SAE Standard covers general, dimensional data, and methods of test for two types of general purpose nut and conical spring washer assemblies, designated Type LN and Type HN, intended for mass production and other operations where speed and convenience are paramount factors.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1979-06-01

HISTORICAL

J78_197906

This standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1973-10-01

HISTORICAL

J78B_197310

This standard covers the dimensional and general specifications, including performance requirements, for carbon steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that carbon steel self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.

Standard

STEEL SELF-DRILLING TAPPING SCREWS

1972-07-01

HISTORICAL

J78_197207

This standard covers the dimensional and general specifications, including performance requirements, for steel self-drilling tapping screws suitable for use in general applications. It is the objective of this standard to insure that self-drilling tapping screws, by meeting the mechanical and performance requirements specified, shall drill a hole and form or cut mating threads in materials into which they are driven without deforming their own thread and without breaking during assembly or service. An Appendix is included to provide a recommended technique for measuring the case depth on the screws.