Search Results

Diesel engine manufacturers have faced stringent emission regulations for oxides of nitrogen and particulate emissions for the last two decades. The emission challenges have been met with a host of technologies such as turbocharging, exhaust gas recirculation, high- pressure common rail fuel injection systems, diesel aftertreatment devices, and electronic engine controls. The next challenge for diesel engine manufacturers is fuel-economy regulations starting in 2014. As a prelude to this effort the department of energy (DOE) has funded the Supertruck project which intends to demonstrate 50% brake-thermal efficiency on the dynamometer while meeting US 2010 emission norms. In order to simultaneously meet the emission and engine efficiency goals in the cost effective manner engine manufacturer have adopted a systems approach, since individual fuel saving technologies can actually work against each other if fuel economy is not approached from a total vehicle perspective.

A 13 L HD diesel engine was converted to run as a flame propagation engine using the HEDGE™ Dual-Fuel concept. This concept consists of pre-mixed gasoline ignited by a small amount of diesel fuel - i.e., a diesel micropilot. Due to the large bore size and relatively high compression ratio for a pre-mixed combustion engine, high levels of cooled EGR were used to suppress knock and reduce the engine-out emissions of the oxides of nitrogen and particulates. Previous work had indicated that the boosting of high dilution engines challenges most modern turbocharging systems, so phase I of the project consisted of extensive simulation efforts to identify an EGR configuration that would allow for high levels of EGR flow along the lug curve while minimizing pumping losses and combustion instabilities from excessive backpressure. A potential solution that provided adequate BTE potential was consisted of dual loop EGR systems to simultaneously flow high pressure and low pressure loop EGR.

Development of new, competitive vehicles in the context of stricter regulations to reduce greenhouse gas emissions and increase fuel economy is driving OEM of commercial vehicles to further explore options for reducing aerodynamic drag in a real-world setting. To facilitate this in regards to the aerodynamics of a vehicle, virtual design methods such as CFD are often used to compliment experiments to help reduce physical testing time and costs. Once validated against experiments, CFD models can then act as predictive models to help speed development. In this paper, a wind tunnel experiment of a Class 8 truck is compared to a CFD simulation which replicates said experiment, validating the CFD model as a predictive tool in this instance. CFD is then used to evaluate the drag and flow around the vehicle in an open road scenario, and the results between the open road and wind tunnel scenarios are compared.