Search Results

BSIV implementation for commercial vehicle in pans India effectively from April 2017. It’s very challenging job for performance and emission engineer to meet engine performance & fuel economy with stringent emission norms for high power and torque density HD diesel engine. In Altitude, lack of air availability & combustion energy passes by mechanical waste gate, lead to lower boost at partial load in waste gate region; which in turn leads to poor engine performance & fuel efficiency and higher turbo speed. To control the turbocharger design speed limit various methodologies adopted like engine derating or optimizing the combustion parameters leads to poor vehicle performance. Combustion parameter optimsation is having limited scope for turbocharger speed control.

With rising concerns on internal combustion engine noise levels in commercial vehicles, it is necessary to attenuate noises present in specific frequency bands. This can be achieved with the implementation of a quarter wave tube on the present exhaust system. Historically such passive attenuators have been efficient only at specific engine speeds and exhaust gas temperatures. A new folded adaptive quarter wave tube design is proposed here which can give significant noise attenuation at various engine operating conditions. The proposed design eliminates the requirement of complex electronic actuating mechanisms for the adaptive quarter wave tubes and replaces the same by perforated diaphragms and adjustable end plates, which are more robust and effective. The module can replace the turbo S-flow single chambered muffler which is installed on most of the commercial vehicles. A design is conceptualized and developed using CAD tools.

Vehicle life and performance is affected by many factors when in use. The most influential being the vibrations generated especially when the vehicle is in motion. These vibrations are directly experienced by the driver, whose performance goes down, if under continuous influence of these vibrations. This increases the fatigue and greatly reduces the return on investment done by the customer. There are two major sources of vibrations, the engine and the road on which the vehicle moves. To prevent such issues engine mounts are used in vehicles, which may seem simple but perform a critical role, of providing comfort to the driver. Therefore, it becomes important that thoroughly designed and examined mounts are being used in the vehicle. This paper focuses on the methodology to be followed for design and validation of an engine mount used in heavy duty vehicles.

In the current landscape of commercial vehicle industry, fuel economy is one of the major parameter for fleet owner’s profitability as well as greenhouse gasses emission. Less fuel efficiency results in more fuel consumption; use of conventional fuel in engines also makes environment polluted. The rapid growth in fuel prices has led to the demand for technologies that can improve the fuel efficiency of the vehicle. Phase change material (PCMs) for Thermal energy storage system (TES) is one of the specific technologies that not only can conserve energy to a large extent but also can reduce emission as well as the dependency on convention fuel. There is a great variety of PCMs that can be used for the extensive range of temperatures, making them attractive in a number of applications in automobiles.

The job of a suspension system is to maximize the friction between the tires and the road surface, to provide steering stability with good handling and to act as a cushioning device to ensure the comfort of the driver and passengers. The suspension system also protects the vehicle and any cargo or luggage from damage and wear. Commonly the strength of these suspension systems is evaluated by endurance trials on field or Rig testing which are time consuming and costly. On the other hand, virtual testing methods for strength and stiffness evaluation provide useful information early in the design cycle and save significant time and cost. However, the virtual method also needs validation, which can be achieved by physical co-relations (via rig tests). A study has been done to predict the behavior of Leaf Spring Suspensions entirely through the FEA (Finite Element Analysis) route and correlating those results with physical test.

In an automobile, main function of the steering system is to allow the driver to guide the vehicle on a desired course. Steering system consists of various components & linkages. Using these linkages, the torque from steering wheel is transferred to tyre which results in turning of the vehicle. Over the life of vehicle, these steering components are subjected to various loading conditions. As steering components are safety critical parts in the vehicle, therefore they should not fail while running because it will cause vehicle breakdown. In commercial vehicle segment, vehicle breakdown means delay in freight delivery which results in huge loss to costumer. Therefore, while designing steering components one should consider all the possible loadings condition those are possible. But, it can’t be done through theoretical calculation. Therefore, physical tests have to be carried out to validate design of steering system, which is very costly & time-consuming process.

At the time of invention of road coaches, the vehicle consisted only of an axle with wheels and a body attached. Smooth roads were built for a better ride comfort however they were not consistent. The road coaches were too bumpy and uncomfortable for the passenger along with the driver who was not able to control the vehicle. That's why the engineers had to shift their attention to the suspension system for a better ride comfort and handling. The technology has advanced with time so as the suspension system. Rubber ended type leaf spring is one of the suspension system types available in the industry. The main function of a suspension in order of importance is as below: 1 Acts as a cushioning device ensuring the comfort of the driver and passengers; 2 Maximizes the contact between the tires and the road surface to provide steering stability with good handling; 3 Protects the vehicle itself and any cargo or luggage from damage and wear.

In the modern era of commercial vehicle industry, passenger and driver comfort is one of the major parameters that improves vehicle running time which leads to fleet owner’s profitability. Air conditioning system is one such system whose primary function is to provide the required cooling inside the cabin in hot weather conditions. An Air-conditioned truck cabin creates a comfortable environment for the driver which increases his efficiency and reduces fatigue. An AC compressor consumes power directly from the engine affecting fuel economy and vehicle performance. With ever increasing demand for energy efficient systems and thermal comfort in automobiles, AC systems should be able to deliver the required cooling performance with minimum power consumption. Therefore, reducing AC power consumption in vehicles is one of the key challenges faced by climate control engineers.

The hybrid structure of Engine Mounts made of rubber casing with cast iron reinforcing. Use of two materials made it unique both in application and testing. The rubber provides damping for engine vibrations and the cast iron provides necessary strengthening to hold the heavy engine in place. In this research paper the FEA (Finite Element Method) methodology is being discussed to evaluate and optimize the design analysis to enhance overall engine mount capacity. The existing and modified designs are validated and considerable improvement is being observed in modified design in physical testing. Accurate modeling of engine mounts assembly is presented in this paper. FEA analysis results have good correlation with physical validation for both designs. Impact of design parameters of rubber mounts has been presented.

An efficient after treatment technique is driven by the need to maintain strict emission norms for heavy-duty and medium-duty ground vehicles. SCR being an advanced active emission technology system for diesel engine, is one of the most cost-effective and fuel-efficient technologies available for complying with the stringent NOx emission legislations. The design of the SCR system involves catalyst selection, complex controller development like urea dosing strategy and the interaction between engine setup and after treatment system. For this purpose, the SCR model must be computationally efficient to evaluate the complete efficiency along with to take care for the NH3 slip also. The SCR model was prepared with respect to SCR inlet temperature and ratio of NOx and ammonia to study the behavior of NOx conversion efficiency keeping consideration of NH3 slip also required for optimizing the calibration.

Market driven competition in global trade and urgency for controlling the atmospheric air pollution are the twin forces, which have urged Indian automobile industries to catch up with the international emission norms. Improvement in the fuel efficiency of the vehicles is one way to bind to these stringent norms. It is experimentally proven that almost 40% of the available useful engine power is being consumed to overcome the drag resistance and around 45% to overcome the tire rolling resistance of the vehicle. This as evidence provides a huge scope to investigate the influence of aerodynamic drag and rolling resistances on the fuel consumption of a commercial vehicle. The present work is a numerical study on the influence of aerodynamic drag resistance on the fuel consumption of a commercial passenger bus. The commercial Computational Fluid Dynamics (CFD) tool FLUENT™ is used as a virtual analysis tool to estimate the drag coefficient of the bus.

Ever-increasing operational cost, reducing profit margins & increase in competition, it is of upmost significance for fleet owners & drivers to opt for a vehicle having maximum uptime. OEM's are under immense pressure to design & develop vehicles/subsystems which are reliable enough to minimize downtime & withstand heavy overloading plus extreme operating conditions especially tippers. Vehicle systems like Wheel end (hub, bearing, and grease) which are designed & packaged according to a very stringent envelop & operate as a closed system facing all the extremities of operating conditions. This undoubtly make them prone to no. of failure modes which are resulting in vehicle unplanned stoppages, so any failure mode related to the same must be taken care with utmost importance. In commercial vehicles the bearing outer cup is in interference fit with the hub. These bearings of wheel hub have to be maintained at the wheel end play of few microns.

Most popular practice for analyzing the Subsystem failures in commercial vehicles is physical testing. These physical tests are carried out by three tests; Endurance testing, Accelerated Endurance Testing and Rig test simulation. All the three methods are costly and repetitive iterations of these tests is not economical. Therefore, in our organization, we established a method in virtual domain in order to reduce the repetitive iterations and also reduction in time consumed per iteration. General practice in our organization for Finite Element Analysis (FEA) calculation was inclusive of Model preparation, Transient analysis using Nastran. The results from the Transient analysis are used for performing fatigue analysis in fatigue software. In this process, Transient analysis and Model preparation are very much time consuming processes. Model preparation cannot be reduced, but to reduce the transient analysis time, we established a method in frequency domain (vibrational fatigue) [1].

In the current commercial vehicles market, ride-comfort and handling are crucial parameters for the customer and end user. There are various aspects which determine the vehicle behavior. One of aspects is the structural rigidity of the vehicle, which has its own effect on vehicle dynamics. To meet the required stiffness of the main structural component of the vehicle i.e. chassis frame, FEA analysis has to be done in current methodology. The number of iterations have to be done to build an appropriate model with low weight, which can meet the design requirements. At first, conceptual design mock-up unit is to be developed then FEA (CAE) analysis to be done on it. If any design criteria are not met, then this cycle repeats again until it fulfils the required stiffness. Today, the direct stiffness procedure is the basic principle of almost every FEA software package.

In recent times there has been rising demand for noise level reduction in commercial vehicles. Vehicle engine exhaust system is one of the key sources of noise at driver ear, especially in smaller wheel base vehicles, as well as critical for meeting pass by noise regulations. Several techniques are used to reduce the noise level of an exhaust system such as resonators, dissipative mufflers for low & high frequencies respectively. In this paper sound transmission loss (STL) measurement for a LMD bus exhaust system was carried out at rig level. It has been found from the measured data that noise attenuation of current exhaust system is poor in low frequency zone & therefore lower STL frequencies were identified. To attenuate the noises at identified frequencies Helmholtz resonator was introduced, which is particularly effective for low frequency noise attenuation.

Turbocharging has become an important method for increasing the power output of diesel engines. A perfectly matched turbocharger can increase the engine efficiency and decrease the BSFC. For turbocharger matching, engine manufacturers are dependent on the turbocharger manufacturers. In this paper, an analytical model is presented which could help engine manufacturers to analyze the performance of turbocharger for different load and ambient condition using compressor and turbine map provided by turbo manufacturers. The analytical model calculates the required pressure at inlet and exhaust manifold for fixed vane turbocharger with waste gate using inputs like BSFC, lambda, volumetric efficiency, turbocharger efficiency and heat loss, that are available with the engine manufacturer.