Refine Your Search

Date

Date

Topic

Topic

Author

Author

Casting Standard Commercial Vehicle Hoses and tubes Marine vehicles and equipment Cleaning Suppliers

Search Results

Viewing 1 to 20 of 328
123Next >Last >>
Sort by relevance
Standard

Hydraulic System Diagrams and Associated Tables for Marine Vehicles
2012-09-17
WIP
J1780
This document establishes the requirements for technical content and format of hydraulic system diagrams. This document does not establish configuration requirements, material, or performance requirements for any system or component identified herein. The purpose of this document is to specify the minimum technical content of marine and submergence vehicle hydraulic system diagrams and provide a standard format. Diagrams prepared in accordance with this document will be suitable for use in procurement activity, shipboard installation, and technical manuals for use in troubleshooting, operation, and maintenance of the hydraulic system.
Standard

Tire Size Differential - Articulated Wheel Loader
2019-11-20
CURRENT
J2204_201911
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER
1994-05-01
HISTORICAL
J2204_199405
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

General Environmental Considerations for Marine Vehicles
2014-02-04
WIP
J1777
This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably. This HIR is intended for use as a guide for the development of specific environmental requirements to be included in detailed specifications for marine vehicles and associated equipment. Specific requirements are in a state of continual change as our knowledge of the ocean environment increases. The ocean environment varies with location and time. Changes in the ocean environment can occur not only on a seasonal basis but also monthly, weekly, daily, and in some cases even hourly.
Standard

GENERAL ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES
1990-12-01
CURRENT
J1777_199012
This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably.
Standard

Recreation Off-Road Vehicle Product Identification Numbering System
2012-05-07
CURRENT
ICS1000_201205
This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines
2007-03-20
HISTORICAL
J1069_200703
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines
2012-05-02
CURRENT
J1069_201205
This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2008-04-11
HISTORICAL
J1051_200804
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2002-12-18
HISTORICAL
J1051_200212
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2020-03-30
CURRENT
J1051_202003
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2013-08-05
HISTORICAL
J1051_201308
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES
1984-06-01
HISTORICAL
J624_198406
This recommended practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.
Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES
1989-09-01
HISTORICAL
J624_198909
This SAE Recommended Practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.
Standard

LUBRICATION CHART—CONSTRUCTION AND INDUSTRIAL MACHINERY
1982-06-01
HISTORICAL
J753_198206
The chart is to include basic maintenance items that the manufacturer considers essential for normal operation of the machine. The chart is not intended to cover all maintenance functions and should refer the user to the manufacturers’ manuals. Attachments may be included on the chart with the standard machine or covered by separate charts. When preparing a chart, consult SAE J752b, Maintenance Interval and SAE J754a. Lubricant Types.
123Next >Last >>
X