Search Results

Standard

Engine-Off Cab Heating and Air Conditioning Systems Test Procedure and Performance Requirements - Trucks with and Without Sleepers

2012-02-06

HISTORICAL

J2918_201202

This SAE Recommended Practice establishes uniform test procedures and performance requirements for engine-off heating, ventilation, and air conditioning (HVAC) systems in order to achieve driver thermal comfort in both winter and summer rest periods. This specification will apply to heavy trucks with and without sleeper compartments, including but is not limited to Class 6, 7, and 8 powered vehicles.

Standard

Tire Size Differential - Articulated Wheel Loader

2019-11-20

CURRENT

J2204_201911

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER

1994-05-01

HISTORICAL

J2204_199405

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

Standard

Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)

2019-05-10

CURRENT

J2295M_201905

This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

Fasteners—Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Metric)

2006-06-21

HISTORICAL

J2295M_200606

This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.

Standard

GENERAL ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES

1990-12-01

CURRENT

J1777_199012

This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably.

Standard

Vacuum Excavation and Sewer Cleaning Equipment Classification and Nomenclature

2019-11-19

CURRENT

J3106_201911

This document lists common terminology for vacuum excavation and sewer cleaning equipment, including component names and specific work completed by these machines. This document also illustrates some common types of equipment.

Standard

Air Disc Brake Actuator Test Procedure, Truck-Tractor, Bus and Trailer

2020-12-07

CURRENT

J2902_202012

This SAE recommended practice provides procedures and methods for testing service, spring applied parking and combination brake actuators for air disc brake applications. Methods and recommended samples for testing durability, function and environmental performance are listed in 1.1 and 1.2.

Standard

Fuel Economy Measurement Test (Engineering Type) for Trucks and Buses

1997-12-01

CURRENT

J1376_199712

This procedure incorporates test cycles that produce relative fuel economy data relating to long haul, short haul, and local driving patterns, or any combination of these and to those components developed to improve fuel economy for these patterns. The tests conducted on a specific vehicle are to reflect that vehicle's general mode of operation. The procedure is intended to be used under controlled, warmed-up conditions on a test tract or on suitable roads. A minimum of two vehicles running simultaneously is required. Test condition recommendations are provided for undertaking this engineering test. If it is necessary to conduct a test outside of these test conditions, the purpose of the test and the variant conditions should be recorded and noted whenever the results are reported.

Standard

Recreation Off-Road Vehicle Product Identification Numbering System

2012-05-07

CURRENT

ICS1000_201205

This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.

Standard

Fuel-Fired Heaters - Air Heating - for Construction and Industrial Machinery

2011-11-30

CURRENT

J1024_201111

This standard covers off-road, self-propelled work machines as categorized in SAE J1116. This standard outlines requirements that must be met in order for the heating equipment to perform satisfactorily on construction and industrial machinery.

Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

2007-03-20

HISTORICAL

J1069_200703

This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)

Standard

Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines

2012-05-02

CURRENT

J1069_201205

This recommended practice deals with sizes, design considerations, and practices related to evacuating and refilling by positive means any oil comportment. This practice may also be applicable to other fluid compartments and is to supplement rather than eliminate the drain plug. (Ref. ISO TC 131/4/N27)

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2008-04-11

HISTORICAL

J1051_200804

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2002-12-18

HISTORICAL

J1051_200212

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2020-03-30

CURRENT

J1051_202003

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines

2013-08-05

HISTORICAL

J1051_201308

This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.

Standard

FORCE-DEFLECTION MEASUREMENTS OF CUSHIONED COMPONENTS OF SEATS FOR OFF-ROAD WORK MACHINES

1988-12-01

HISTORICAL

J1051_198812

Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES

1984-06-01

HISTORICAL

J624_198406

This recommended practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.

Standard

TAPPED AND FLANGED EXHAUST CONNECTIONS FOR SMALL ENGINES

1989-09-01

HISTORICAL

J624_198909

This SAE Recommended Practice applies to domestic four-cycle air- and water-cooled engines having a maximum of 20 hp (14.9 kW) or less in power output and/or 50 in3 (0.82 L) or less in displacement, with horizontal or vertical crankshafts.