Refine Your Search

Date

Date

Topic

Topic

Author

Author

Materials Standard Commercial Vehicle Cleaning Suppliers

Search Results

Viewing 1 to 20 of 465
123Next >Last >>
Sort by relevance
Standard

Tire Size Differential - Articulated Wheel Loader
2019-11-20
CURRENT
J2204_201911
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

TIRE SIZE DIFFERENTIAL—ARTICULATED WHEEL LOADER
1994-05-01
HISTORICAL
J2204_199405
This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.
Standard

Fasteners - Part Standard - Cap Screws, Hex Bolts, and Hex Nuts (Metric)
2019-05-10
CURRENT
J2295M_201905
This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.
Standard

Fasteners—Part Standard—Cap Screws, Hex Bolts, and Hex Nuts (Metric)
2006-06-21
HISTORICAL
J2295M_200606
This SAE Part Standard covers selected metric screws, hex bolts, and nuts manufactured in accordance with American Society for Testing and Materials (ASTM) and SAE fastener standards. This document covers fastener materials often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This document permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document.
Standard

SHIP SYSTEMS AND EQUIPMENT—FASTENERS—SELECTION AND IDENTIFICATION REQUIREMENTS
1996-04-01
HISTORICAL
J2280_199604
This SAE Standard provides a comprehensive list of requirements for the selection, identification, and control of metric and inch sized fasteners for use in shipboard applications for both shipbuilder installed joints and for use in shipboard components. The fastener selection requirements include the following: a Materials b Thread selection c Plating, coatings, and surface treatments d Locking devices and elements e Screw thread fastener inserts f Fastener part or identifying numbers g Identification markings
Standard

General Environmental Considerations for Marine Vehicles
2014-02-04
WIP
J1777
This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably. This HIR is intended for use as a guide for the development of specific environmental requirements to be included in detailed specifications for marine vehicles and associated equipment. Specific requirements are in a state of continual change as our knowledge of the ocean environment increases. The ocean environment varies with location and time. Changes in the ocean environment can occur not only on a seasonal basis but also monthly, weekly, daily, and in some cases even hourly.
Standard

GENERAL ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES
1990-12-01
CURRENT
J1777_199012
This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably.
Standard

MINIMUM PERFORMANCE CRITERIA FOR BRAKING SYSTEMS FOR SELF-PROPELLED, SMOOTH STEEL WHEEL, PNEUMATIC TIRED OR MULTIPLE PROJECTION STEEL WHEEL ROLLERS AND COMPACTORS
1976-04-01
HISTORICAL
J1136_197604
Minimum performance criteria for service braking systems, emergency stopping systems, and parking systems for all self-propelled vibratory and static weight smooth steel wheel, pneumatic tired or multiple projection steel wheel rollers and compactors are provided in this S.A.E. recommended practice.
Standard

Recreation Off-Road Vehicle Product Identification Numbering System
2012-05-07
CURRENT
ICS1000_201205
This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.
Standard

USE OF TERMS YIELD STRENGTH AND YIELD POINT
1991-06-01
HISTORICAL
J450_199106
The purpose of this SAE Recommended Practice is to describe the terms yield strength and yield point. Included are definitions for both terms and recommendations for their use and application.
Standard

TON-MILE PER HOUR TEST PROCEDURE
1974-03-01
HISTORICAL
J1015_197403
The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.
Standard

TON-MILE PER HOUR TEST PROCEDURE
1977-06-01
HISTORICAL
J1015_197706
The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.
Standard

TON-MILE PER HOUR TEST PROCEDURE
1983-12-01
HISTORICAL
J1015_198312
The TMPH rating defines another factor for evaluating the performance capability of off-the-road tires. The TMPH rating is a measure of work per unit time and as such is intended to supplement information published by tire industry standards associations and by tire manufacturers.
Standard

NOMENCLATURE—ROLLERS AND COMPACTORS
1986-01-01
HISTORICAL
J1017_198601
This SAE Standard provides names of major components peculiar to rollers and compactors. Illustrations of components are not intended to be exactly descriptive of any particular machine. See Figures 1 to 3.)
Standard

Force-Deflection Measurements of Cushioned Components of Seats for Off-Road Work Machines
2008-04-11
HISTORICAL
J1051_200804
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
123Next >Last >>
X