Search Results

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

This SAE Standard applies to the usage of tires of the same nominal size and tread type, but with different outside diameter for articulated front-end loaders. Articulated four-wheel-drive front-end loader performance and component life can be affected by excessive differences in the tire outside circumference and/or diameter. The purpose is to provide specific guidelines for the usage of tires with different outside circumference and/or diameter on articulated front-end loaders.

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment, and promote uniform testing.

This Hydrospace Information Report (HIR) identifies the general environmental considerations for the design, development, evaluation, and testing of advanced surface craft, submersible vehicles, and other marine craft. This HIR provides criteria on the environmental limits within which marine vehicles, related components, and associated equipment should operate satisfactorily and reliably. This HIR is intended for use as a guide for the development of specific environmental requirements to be included in detailed specifications for marine vehicles and associated equipment. Specific requirements are in a state of continual change as our knowledge of the ocean environment increases. The ocean environment varies with location and time. Changes in the ocean environment can occur not only on a seasonal basis but also monthly, weekly, daily, and in some cases even hourly.

This SAE Recommended Practice is intended to serve as a reference for the amount of torque that a Power Take-Off can induce on the transmission mounting pad. This document will apply to six-bolt, eight-bolt, and rear mounted power take-offs.

This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures. The purpose of this document is to establish performance requirements for a Discriminating Back-Up Alarm System.

This document specifies the format, content and parameters for a product identification numbering system for off-road recreation vehicles, based on the PIN structure for earth-moving machinery in ISO 10261:2002E and is not applicable to the identification of components or attachments. This standard applies only to the off-road recreation vehicle industry and does not impose parameters for the marine, lawn and garden, silviculture, husbandry, construction or earth moving sectors.

To provide specifications for lighting and marking of agricultural equipment whenever such equipment is operated or traveling on a highway.

This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring exterior sound levels of self-propelled agricultural field equipment of 15 kW (20 net engine hp) or greater. It is not intended to cover operation of safety devices (such as alarms), or equipment used primarily in stationary operation. The sound levels obtained by using this test procedure are repeatable and representative of the higher range of sound levels generated by the machine in normal road transport. The sound levels are not intended to represent the average or equivalent sound levels over a field use cycle.

This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring exterior sound levels of self-propelled agricultural field equipment of 15 kW (20 net engine hp) or greater. It is not intended to cover operation of safety devices (such as alarms), or equipment used primarily in stationary operation. The sound levels obtained by using this test procedure are repeatable and representative of the higher range of sound levels generated by the machine in normal road transport. The sound levels are not intended to represent the average or equivalent sound levels over a field use cycle.

This SAE Recommended Practice sets forth the instrumentation and procedures to be used in measuring exterior sound levels of self-propelled agricultural field equipment of 15 kW (20 net engine hp) or greater. It is not intended to cover operation of safety devices (such as alarms), or equipment used primarily in stationary operation. The sound levels obtained by using this test procedure are repeatable and representative of the higher range of sound levels generated by the machine in normal road transport. The sound levels are not intended to represent the average or equivalent sound levels over a field use cycle.

This SAE Standard includes only those towing winches commonly used on skidders and crawler tractors. These winches are used on self-propelled machines described in SAE J1057, J1116, and J1209. Specifically excluded are those winches used for hoisting operations.

This SAE Standard defines a method for the measurement of the whole body vibration to which the seated operator of off-highway self-propelled work machines is exposed while performing an actual or simulated operation. It applies to vibration transmitted to the operator through the seat. There are not equivalent ISO Standards. In the main body of this document, conditions are defined for measuring and recording whole body vibration of the seated operator of off-highway self-propelled work machines. The specification of instruments, analytic methods, and description of site and operating conditions allows the measurements to be made and reported with an acceptable precision. The procedure includes means of weighing the vibration level at different frequencies as specified in ISO2631. A standard format for reporting spectral data is recommended. The definitions, instruments, and analytic methods also apply to simulated tests for operator vibration as performed in laboratories.

This recommended practice applies to construction and general purpose industrial machines as categorized in SAE J1116. It describes the parameters related to the inherent availability of the covered classes of Off-Road Self-Propelled Work Machines.