Refine Your Search

Date

Date

Performance tests Truck and Bus Brake Systems Committee Commercial Vehicle Cetane Power and Propulsion

Search Results

Viewing 1 to 17 of 17
1
Sort by relevance
Standard

Brake Force Distribution Test Procedure - Trucks and Buses
2011-07-13
HISTORICAL
J1505_201107
This SAE Recommended Practice provides the test procedure and instructions for air braked single unit trucks, buses, and combination vehicles. It also provides recommendations for: a Instrumentation and equipment b Vehicle preparation c Calculating distribution of brake force
Standard

In-Service Brake Performance Test Procedure--Vehicles Over 4500 kg (10 000 lb)
2000-09-29
CURRENT
J1250_200009
This SAE Recommended Practice establishes a uniform practical series of subprocedures for level road testing of the brake performance of vehicles with gross vehicle weight ratings over 4500 kg (10 000 lb). The purpose of this practice is to establish a uniform method for use by operators and law enforcement agencies, to evaluate the condition of the brake systems of vehicles with GVWRs and GCWRs over 4500 kg (10 000 lb) under any condition of loading. By following the test procedures set forth, the operator and/or law enforcement agencies can ascertain if the vehicle meets the service brake and emergency brake stopping distance requirements of applicable State and Federal regulations.
Standard

Brake Force Distribution Field Test Procedure for Truck and Bus
2003-04-29
HISTORICAL
J225_200304
This SAE Recommended Practice provides a field test procedure and instructions for: a Instrumentation and Equipment b Vehicle Preparation c Test of air-braked single and combination vehicles d Calculation of brake force distribution e This test procedure is intended to be used as a field procedure. If a more refined method, utilizing laboratory equipment, is required, refer to SAE J1505.
Standard

Brake Rating Power Requirements - Truck and Bus
2019-07-18
CURRENT
J257_201907
The minimum performance values in this SAE Recommended Practice are applicable to vehicles with brake systems having typical service pressure ranges 0 to 16.6 MPa (0 to 2400 psi) hydraulic or 0 to 945 kPa (0 to 135 psi) air only. SAE J880 not only provides for determining maximum brake rating power capability, but also permits verification of any desired or arbitrary level such as the requirement established herein. The determining criteria for deciding brake rating power capability are: a. Cold brake stopping ability. b. Fade as a result of brake power absorption. c. Hot brake stopping ability following brake power absorption. d. Brake system stability following brake power absorption. e. Functional and structural integrity of brake system following test.
Standard

Brake Force Distribution Performance Guide—Truck and Bus
2003-09-09
HISTORICAL
J1854_200309
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air-braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 4536 kg (10 000 lb) designed to be used on the highway in combination with other air-braked vehicles of this type in commercial operations.
Standard

Brake Force Distribution Performance Guide - Truck and Bus
2013-09-04
HISTORICAL
J1854_201309
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air-braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 4536 kg (10 000 lb) designed to be used on the highway in combination with other air-braked vehicles of this type in commercial operations.
Standard

Brake Force Distribution Performance Guide - Truck and Bus
2022-07-26
CURRENT
J1854_202207
This SAE Recommended Practice establishes performance guidelines for the threshold pressure and brake force output of the brakes on the axles of air-braked towing trucks, truck-tractors, truck-trailers, and converter dollies with GVWRs over 4536 kg (10000 pounds) designed to be used on the highway in combination with other air-braked vehicles of this type in commercial operations.
Standard

Drawbar Pull Performance Criteria
2006-09-27
HISTORICAL
J2503_200609
This SAE Performance Criteria code applies to vehicles that are tested in accordance with SAE J1729 and SAE J1626.
Standard

Drawbar Pull Performance Criteria
2012-05-24
CURRENT
J2503_201205
This SAE Performance Criteria code applies to vehicles that are tested in accordance with SAE J1729 and SAE J1626.
Standard

Trailer Grade Parking Performance Test Procedure
2018-11-12
CURRENT
J1452_201811
This SAE Recommended Practice establishes methods to determine grade parking performance with respect to: a Ability of the parking brake system to lock the braked wheels. b The trailer holding or sliding on the grade, fully loaded, or unloaded. c Applied manual effort. d Unburnished or burnished brake lining friction conditions. e Down and upgrade directions.
1
X