Refine Your Search

Date

Date

Topic

Topic

Vehicle drivers Exteriors OPTC3, Lighting and Sound Committee Environment Commercial Vehicle

Search Results

Viewing 1 to 20 of 39
12Next >Last >>
Sort by relevance
Standard

LED Work Lighting Devices
2022-06-13
CURRENT
J2895_202206
This SAE Recommended Practice provides general design performance requirements and related test procedures for LED “white” lighting unit assemblies, other than signal and marking devices, used on Earthmoving, Road Building, and Maintenance off-road work machines as defined in SAE J1116. This report is intended to serve as a guide to standard practice and is subject to change to reflect additional experience and technical advances.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION AND INDUSTRIAL MACHINERY
1980-04-01
HISTORICAL
J598_198004
This recommended practice applies to floodlamp and headlamp units intended for use on off-highway vehicles and machines generally known as earthmoving equipment. Other performance and dimensional information is contained in SAE J572 and SAE J760.
Standard

SEALED LIGHTING UNITS FOR CONSTRUCTION, INDUSTRIAL, AND FOREST MACHINERY
1987-05-01
HISTORICAL
J598_198705
This recommended practice applies to floodlamp, headlamp and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2) and forestry machines (4), as noted on SAE J1116. Construction and Industrial Machinery is normally operated off highways, therefore, this SAE Recommended Practice is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.
Standard

Sound Measurement - Off-Road Work Machines - Exterior
2013-06-20
CURRENT
J88_201306
This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.
Standard

Sound Measurement - Construction Site
2013-03-19
HISTORICAL
J1075_201303
This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.
Standard

Horn—Forward Warning—Electric—Performance, Test, and Application
2006-10-02
HISTORICAL
J1105_200610
The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated, operator controlled forward warning horn devices, primarily intended for use on self-propelled, work machines as defined by J1116 (limited to categories of 1) construction, and 2) general purpose industrial).
Standard

Sound Measurement—Off-Road Self-Propelled Work Machines Operator-Work Cycle
2008-02-06
HISTORICAL
J1166_200802
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Roller/Compactor Pad Foot Wheel Compactor with Dozer Excavator and Wheel Feller-Buncher Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Backhoe Hydraulic Excavator Log Skidder Pipelayer Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle representing continuous medium to heavy work.
Standard

Sound Measurement—Off-Road Self-Propelled Work Machines Operator-Work Cycle
2014-09-18
HISTORICAL
J1166_201409
This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: • Crawler Loader • Grader • Log Skidder • Wheel Loader • Crawler Tractor with Dozer • Pipelayer • Dumper • Wheel Tractor with Dozer • Trencher • Tractor Scraper • Backhoe • Sweeper • Roller/Compactor • Hydraulic Excavator • Pad Foot Wheel Compactor with Dozer • Excavator and Wheel Feller-Buncher The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle representing continuous medium to heavy work.
Standard

SOUND MEASUREMENT-EARTHMOVING MACHINERY-OPERATOR-WORK CYCLE
1987-02-01
HISTORICAL
J1166_198702
This SAE Standard sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted sound level at the operator station(s) of earthmoving machinery. Earthmoving machinery is defined per SAE J1057 JUN81. This standard is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during operation. The standard describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The standard describes the method used to calculate the time weighted average sound level at the operator station(s) identified in the practice as Leq(5) for continuous operation of the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
Standard

OPERATOR STATION SOUND LEVEL MEASUREMENT PROCEDURE FOR POWERED MOBILE EARTHMOVING MACHINERY—WORK CYCLE TEST
1976-12-01
HISTORICAL
J1166_197612
This SAE Recommended Practice sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted average sound level at the operator station(s) of powered mobile earthmoving machinery of 15 kW (20 bhp) and over. This Recommended Practice is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during its operation. The Recommended Practice describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The Recommended Practice describes the method used to calculate the time weighted average sound level at the operator station(s)—identified in this practice as Leq(5)—for continuous operation on the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.
12Next >Last >>
X