Search Results

This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures.

This SAE Standard describes methods for evaluating the performance of the systems detection device, the minimum detection areas behind the machine, the visual and audible information presented to the operator and ground personnel, and the systems fault detection requirements. Also included are operator system function tests and maintenance procedures. The purpose of this document is to establish performance requirements for a Discriminating Back-Up Alarm System.

This SAE Recommended Practice applies to floodlamp, headlamp, and general service lamp units intended for use on off-road self-propelled work machines classified as construction (1.1 and 1.2), general purpose industrial (2), and forestry machines (4), as noted in SAE J1116. Construction and Industrial Machinery is normally operated off highways; therefore, this document is not intended to be used as a basis for regulations by those having authority over motor vehicles used on public highways. Other performance and dimensional information is contained in SAE J572 and J760.

The requirements for setting up and operating the machinery, the microphone array and hemispherical measurement surface are given in this document. This document shall be used in conjunction with manufacturer's recommendations pending finalization of ANSI documents on the subject of sound intensity procedures. The accompanying sound intensity procedure clarification is provided pending more widespread understanding of sound intensity.

This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.

This SAE Standard sets forth the instrumentation and procedure to be used in measuring the exterior sound pressure levels for self-propelled off-road work machines as defined in sections 1, 3, 5 and 6 of SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. The sound levels obtained by using the test procedures set forth in this document are repeatable and are representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to the variability of field operating conditions, this data is not intended to be used for construction site boundary noise evaluations.

This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.

This SAE Standard sets forth measurement procedures and instrumentation to be used for determining a “representative” sound level during a representative time period at selected measurement locations on a construction site boundary. The document is not intended for use in determining occupational hearing damage risk. Determination of a representative time period is left to the judgment of the user.

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for industrial wheeled equipment.

The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated, operator controlled forward warning horn devices, primarily intended for use on self-propelled, work machines as defined by SAE J1116 (limited to categories of (1) construction and (2) general purpose industrial).

The scope of this SAE Standard is the definition of the functional, environmental, and life cycle test requirements for electrically operated, operator controlled forward warning horn devices, primarily intended for use on self-propelled, work machines as defined by J1116 (limited to categories of 1) construction, and 2) general purpose industrial).

This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: Crawler Loader Wheel Loader Dumper Tractor Scraper Roller/Compactor Pad Foot Wheel Compactor with Dozer Excavator and Wheel Feller-Buncher Grader Crawler Tractor with Dozer Wheel Tractor with Dozer Backhoe Hydraulic Excavator Log Skidder Pipelayer Trencher Sweeper The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle representing continuous medium to heavy work.

This SAE Standard sets forth the procedures to be used in measuring sound levels and determining the time weighted sound level at the operator's station(s) of specified off-road self-propelled work machines. This document applies to the following work machines which have operator stations as specified in SAE J1116: • Crawler Loader • Grader • Log Skidder • Wheel Loader • Crawler Tractor with Dozer • Pipelayer • Dumper • Wheel Tractor with Dozer • Trencher • Tractor Scraper • Backhoe • Sweeper • Roller/Compactor • Hydraulic Excavator • Pad Foot Wheel Compactor with Dozer • Excavator and Wheel Feller-Buncher The instrumentation requirements and specific work cycles for these machines are described. The method used to calculate the time weighted average sound level at the operator station(s) is specified for Leq(5), or optional exchange rates, during continuous operation in a work cycle representing continuous medium to heavy work.

This SAE Standard sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted sound level at the operator station(s) of earthmoving machinery. Earthmoving machinery is defined per SAE J1057 JUN81. This standard is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during operation. The standard describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The standard describes the method used to calculate the time weighted average sound level at the operator station(s) identified in the practice as Leq(5) for continuous operation of the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.

This SAE Recommended Practice sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted average sound level at the operator station(s) of powered mobile earthmoving machinery of 15 kW (20 bhp) and over. This Recommended Practice is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during its operation. The Recommended Practice describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The Recommended Practice describes the method used to calculate the time weighted average sound level at the operator station(s)—identified in this practice as Leq(5)—for continuous operation on the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.

This SAE Standard sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted sound level at the operator station(s) of earthmoving machinery. Earthmoving machinery is defined per SAE J1057 JUN81. This standard is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during operation. The standard describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The standard describes the method used to calculate the time weighted average sound level at the operator station(s) identified in the practice as Leq(5) for continuous operation of the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.

This SAE Recommended Practice sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted sound level at the operator station(s) of earthmoving machinery. Earthmoving machinery is defined per SAE J1057 JUN81. This recommended practice is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during operation. The recommended practice describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The recommended practice describes the method used to calculate the time weighted average sound level at the operator station(s) identified in the practice as Leq(5) for continuous operation of the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.

This SAE Recommended Practice sets forth the procedures to be used only in measuring sound levels and the determination of the time weighted sound level at the operator station(s) of earthmoving machinery of 15 kW (20 bhp) and over. Earthmoving machinery is defined per SAE J1057a. This recommended practice is applicable to earthmoving machinery which has operator station(s) where the operator can either stand or sit and is transported by the machinery during operation. The recommended practice describes the instrumentation requirements and specifies work cycles for earthmoving machinery. The recommended practice describes the method used to calculate the time weighted average sound level at the operator station(s) identified in the practice as Leq(5) for continuous operation of the work cycle. A method to relate the time weighted average sound level at the operator station(s) to operator sound exposure is also provided.

This SAE Standard covers the general requirements and the test requirements for a flashing warning lamp for agricultural equipment.

This SAE Standard provides general design performance requirements and related test procedures for composite lighting unit assemblies, other than signaling and marking devices, used on earthmoving and road building and maintenance off-road work machines as defined in SAE J1116.