Refine Your Search

Date

Date

Topic

Topic

Author

Author

Automotive Noise, Vibration, and Harshness (NVH) Standard Medical Starters and starting Gases Humidity

Search Results

Viewing 1 to 20 of 866
123Next >Last >>
Sort by relevance
Standard

Brake Dynamometer Squeal Noise Test Procedure for Regenerative Systems
2019-09-19
WIP
J3211
The SAE J3211 procedure applies to brake squeal evaluation using single-ended inertia dynamometers for friction couples used on vehicles with regenerative braking systems. This RP applies to squeal noise occurrences for on-road passenger cars and light trucks with a gross vehicle weight rating of 4536 kg or below. The procedure incorporates aspects related to (a) minimum inertia dynamometer capabilties, (b) fixture requirements and setup, and (c) test sequences with emphasis on brake temperatures, brake pressure profiles, and strategies to represent brake blending.
Standard

HIGH CURRENT TIME LAG ELECTRIC FUSES
1990-11-01
CURRENT
J1888_199011
The fuses shown in Figure 1 are for use in motor vehicles, boats, and trailers to protect electrical wiring. This SAE Standard is for the construction shown and is not intended to restrict the design and use of other configurations and materials capable of meeting the vehicle requirements.
Standard

GUIDE TO MANIFOLD ABSOLUTE PRESSURE TRANSDUCER REPRESENTATIVE TEST METHOD
1981-06-01
CURRENT
J1346_198106
This guide is intended to cover test procedures applicable to MAP transducers; it is also applicable to transducers such as Barometric (Ambient) Absolute Pressure transducers, Manifold Vacuum transducers, and similar pressure transducers used in automotive systems. Although oriented towards active devices (those using internal signal conditioning), it can be applied to passive devices with minor modifications.
Standard

Materials for Plastic Check Valves for Vacuum Booster Systems
2001-05-14
CURRENT
J1875_200105
The materials defined by this SAE Standard are unreinforced thermoplastic acetal and thermoplastic 6/6 heat stabilized nylon, as both materials will function in this application. The specific material chosen will depend on the final application's surroundings and heat requirements. They are for use in vacuum booster check valves for hydraulic brake systems.
Standard

PMODE for In-Vehicle Networks
2001-12-19
CURRENT
J2590_200112
This SAE Recommended Practice describes the power mode requirements for in-vehicle networks that conform to the Automotive Multimedia Interface Collaboration (AMI-C) specifications. These networks include, but are not limited to, the IDB-C (SAE J2366), IDB-1394, and MOST. This version of the document covers primarily IDB-C and may be revised when the PMODE requirements for the other networks are more fully developed by AMI-C.
Standard

Blade Fuses - 42 V System
2002-04-24
CURRENT
J2576_200204
This SAE Recommended Practice defines the blade fuse styles, test conditions, procedures, and performance requirements for use in vehicle electrical power systems designed to the new motor vehicle industry 42 V architecture. The intent of this document is to provide a framework for 58 V Blade Fuse characteristics, serving the motor vehicle industry to establish standardization with respect to electrical performance and mechanical requirements. This standardization shall lend itself to safe application practices; e.g., prevention of 32 V devices utilized inappropriately in 42 V electrical systems. Both the performance and mechanical requirements expressed herein are for the advancement of mobility engineering and the development of safe application practices. They are not intended for the establishment of design exclusions, patent rights, or franchising that engenders restraint of trade.
Standard

Abrasion Resistance Testing - Vehicle Exterior Graphics and Pin Striping
2021-01-07
CURRENT
J1847_202101
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
Standard

ABRASION RESISTANCE TESTING—VEHICLE EXTERIOR GRAPHICS AND PIN STRIPING
1989-06-01
HISTORICAL
J1847_198906
This SAE Recommended Practice applies to the abrasion resistance testing of decorative tapes, graphics, and pin striping. It may also have relevance to certain vehicle labels and plastic wood grain film. The resistance to abrasive damage is judged qualitatively by its effect on the legibility, pattern, and color of the graphic marking. This recommended practice is intended as a guide toward standard practice but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering the use of this recommended practice.
Standard

Induction Cure Test for Metal Bonding Adhesives
2021-01-07
CURRENT
J1851_202101
This SAE Recommended Practice defines a procedure for determining the adhesion strength characteristics of heat-cured metal bonding adhesives subjected to induction heating.
Standard

INDUCTION CURE TEST FOR METAL BONDING ADHESIVES
1987-05-01
HISTORICAL
J1851_198705
This SAE Recommended Practice defines a procedure for determining the adhesion strength characteristics of heat-cured metal bonding adhesives subjected to induction heating.
Standard

ACCELERATED ENVIRONMENTAL TESTING FOR BONDED AUTOMOTIVE ASSEMBLIES
1992-08-01
HISTORICAL
J2100_199208
This SAE Recommended Practice defines conditions to which bonded assemblies can be exposed to simulate environmental aging. These recommendations are generally based on existing Original Equipment Manufacturer requirements at this time. (Environmental specifications used for this proposal were from General Motors, Ford, and Chrysler.) The substrate type, dimension, and number are described by the standard for materials being tested and should include control specimens which receive no environmental aging.
Standard

Accelerated Environmental Testing for Bonded Automotive Assemblies
2021-01-07
CURRENT
J2100_202101
This SAE Recommended Practice defines conditions to which bonded assemblies can be exposed to simulate environmental aging. These recommendations are generally based on existing Original Equipment Manufacturer requirements at this time. (Environmental specifications used for this proposal were from General Motors, Ford, and Chrysler.) The substrate type, dimension, and number are described by the standard for materials being tested and should include control specimens which receive no environmental aging.
Standard

Hydraulic Pump Airborne Noise Bench Test
2006-11-08
HISTORICAL
J2747_200611
Communicate the process of accurately measuring sound power levels of positive displacement hydraulic pumps commonly used in ground vehicle steering systems. This recommended practice defines the pump mounting (pulley, belt tension, isolation), operating conditions (fluid, speed, temperature, pressure), room acoustics, instrumentation, noise measurement technique and data acquisition setup to be used. Included are recommendations for test sample size, and format for data presentation/reporting.
Standard

Hydraulic Pump Airborne Noise Bench Test
2019-09-13
CURRENT
J2747_201909
Communicate the process of accurately measuring sound power levels of positive displacement hydraulic pumps commonly used in ground vehicle steering systems. This recommended practice defines the pump mounting (pulley, belt tension, isolation), operating conditions (fluid, speed, temperature, pressure), room acoustics, instrumentation, noise measurement technique and data acquisition setup to be used. Included are recommendations for test sample size, and format for data presentation/reporting.
123Next >Last >>
X