Search Results

Formation of nitrogen oxides (NOx) in direct-injection premixed charge compression ignition (DI-PCCI) combustion simulated in a constant volume vessel was investigated using an ignition-combustion model that combines a stochastic mixing model with a reduced chemical reaction scheme. Several improvements were made to the model in order to predict the combustion processes in DI-PCCI. Calculations were carried out for the injection and ambient conditions equivalent to the measurements using the constant volume vessel. Analysis of the calculated results clarified the effects of mixture heterogeneity on NO concentrations and the mechanisms are discussed. The results show that the model successfully represents the experimental tendency for NO concentration when the injection conditions and ambient oxygen mole fraction are varied.

Fundamental investigation is conducted on flow and the spark-ignited combustion process of a high-speed, unsteady hydrogen jet, by experimental and theoretical approaches. Jet development and flame propagation in a constant-volume vessel were visualized by means of the shadowgraph technique. The effects of ignition timing and ignition location on the combustion process were investigated. Furthermore, a numerical simulation was performed by using incompressible-flow type computational fluid dynamics with the k-ε turbulence model and the flamelet concept. The pseudo-nozzle concept is applied to the inlet condition with a large pressure gradient. The flame propagation process is described by reference to the flame area evolution model. The results show that the pressure-history in a vessel and the flame propagation process are successfully described for experimental data. Furthermore, the flame propagation process in a jet is investigated.

This study aimed to elucidate the ignition processes in transient fuel-sprays over a wide range of ambient conditions corresponding to PCCI combustion, as well as diesel combustion. Ignition of n-heptane sprays was experimentally investigated by using a constant-volume vessel. The well-known temperature dependencies of ignition delays were observed at a high ambient pressure. On the other hand, a negative temperature coefficient (NTC) accompanying a two-stage pressure rise was detected for lower ambient pressures. High-speed shadowgraph images indicated that the temperature rise begins in the highly homogenous mixture along the combustion chamber wall. Enhancement of fuel-air mixing with elevated injection pressure and a reduced nozzle orifice delays the appearance of hot flame in the NTC condition. To better understand these phenomena, ignition processes were predicted using an ignition model including a stochastic turbulent mixing model and a reduced chemical reaction scheme.

A new model to describe diesel combustion process has been developed. In this model diesel combustion field is divided into two zones, premixing and combustion. Turbulent mixing process is described by the stochastic approach in each zone separately. Comparison of calculations with experimental results showed that this model can predict the entire course of heat release and nitrogen-oxide formation precisely, under wide-spread conditions. Two-dimensional flame temperature distributions in the combustion field by the two color method were compared with simulation results. Both the measured and the calculated flame temperature distributions showed good agreements with each other. In the diesel combustion process, the injected fuel mixes with air entrained inside the spray. The mixture is thus formed, and ignites at several points. Random expansion of flamelets accelerates both mixing and combustion. Following this, fairly moderate diffusion combustion proceeds.

Hydrogen fuel is a potential energy source for vehicles in the future. The emission of this fuel complies with the stringent policies issued by the International Energy Agency (IEA). Researchers have nominated the hydrogen compression ignition engine in an argon atmosphere as one of the ways to enhance power output and volumetric efficiency in the midst of pre-ignition and knock problems. Since this type of research is still in the initial stage, numerical studies have become the best method for researchers to obtain data on hydrogen fuel combustion in an argon-oxygen atmosphere. The purpose of this study was to validate the simulation results with the experimental data, investigate the combustion characteristics of hydrogen fuel in an argon-oxygen atmosphere, and to study the effects of the initial temperature and injection pressure on the combustion process. In this research, CONVERGE CFD software was used for the simulation process.

The effects of fuel injection conditions (injection pressure, nozzle orifice diameter and fuel injection quantity) on NOx formation in direct-injection Premixed Charge Compression Ignition (DI-PCCI) combustion were investigated using a constant-volume vessel and a total gas-sampling device. The results show that promotion of fuel-air mixing reduces final NOx mass accompanying a delayed hot flame. In particular, under low oxygen mole fraction conditions, in addition to the hot flame delay, the promotion of fuel-air mixing results in a lower heat release rate. In this case, the final NOx mass is further reduced. For a fixed nozzle orifice diameter, the final NOx mass is reduced with increasing injection pressure. This effect is remarkable for smaller nozzle orifice diameters. Regardless of the oxygen mole fraction, under the low injection fuel quantity condition, enhancement of fuel-air mixing reduces the final NOx mass per released heat.

Aim of this study is to clarify the NOx formation mechanism in diesel combustion under high-supercharged condition. Effects of ambient conditions and fuel injection parameters on diesel combustion were investigated using a constant volume chamber. NOx formation process was investigated using a total gas-sampling device. The results indicate that by using the above experimental setup it is possible to realize entirely diffusion combustion like what seen in the highly supercharged condition. Increasing ambient pressure up to 8MPa with high injection pressure shortens the ignition delay and offers a heat release rate proportional to the fuel injection rate with a short combustion duration. Increasing ambient pressure gives a higher NOx formation rate and final NOx concentration. This is due to enhancement in the fuel-air mixing which promotes the heat release.