This report relates to recommendations and specifications governing the classification, composition, test procedures, and properties of printed circuits commonly used to replace cable in automotive low voltage systems. It is not applicable to miniature circuits for solid state devices, high impedance or high voltage functions.
This report relates to recommendations and specifications governing the classification, composition, test procedures, and properties of printed circuits commonly used to replace cable in automotive low voltage systems. It is not applicable to miniature circuits for solid state devices, high impedance or high voltage functions.
This report relates to recommendations and specifications governing the classification, composition, test procedures, and properties of printed circuits commonly used to replace cable in automotive low voltage systems. It is not applicable to miniature circuits for solid state devices, high impedance or high voltage functions.
This SAE Recommended Practice covers the wiring and connector standards for nonpassenger carrying trailers, SAE Classes 1-3, with circuit loads not to exceed 7.5 amp per circuit. It provides the lighting circuits of these trailers with a universal connecting device, standard circuit coding and protection for the wiring from hazards and shorts. Cancelled-All information now contained in J1239
This SAE Recommended Practice covers the wiring and connector standards for nonpassenger carrying trailers, SAE Classes 1-31, with circuit loads not to exceed 7.5 amp per circuit. It provides the lighting circuits of these trailers with a universal connecting device, standard circuit coding and protection for the wiring from hazards and shorts.
The purpose of this SAE Recommended Practice is to establish minimum performance and user information requirements for battery booster cable sets. Such sets may be used to provide a temporary connection of a surface vehicle battery to another similar battery to provide emergency power when required. This recommended practice DOES NOT ENDORSE NOR RECOMMEND the potentially hazardous procedure of jump starting a vehicle.
The purpose of this SAE Recommended Practice is to establish minimum performance and user information requirements for battery booster cable sets used with 6 OR 12-VOLT BATTERIES. Such sets may be used to provide a temporary connection of a surface vehicle battery to another similar battery to provide emergency power when required. This document DOES NOT ENDORSE NOR RECOMMEND the potentially hazardous procedure of jump-starting a vehicle.
The purpose of this SAE Recommended Practice is to establish minimum performance and user information requirements for battery booster cable sets used with 6 OR 12-VOLT BATTERIES. Such sets may be used to provide a temporary connection of a surface vehicle battery to another similar battery to provide emergency power when required. This document DOES NOT ENDORSE NOR RECOMMEND the potentially hazardous procedure of jump-starting a vehicle.
This SAE Draft Technical Report defines tests methods and general performance requirements of single-pole and multipole connectors for on-board electrical wiring harnesses of road vehicles. These requirements are not intended for connections internal to electronic devices. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance.
This SAE Standard defines tests methods and general performance requirements of single-pole and multipole connectors for on-board electrical wiring harnesses of road vehicles. These requirements are not intended for connections internal to electronic devices. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance.
The SAE Recommended Practice covers the application requirements for terminals and splice clips attached to stranded low tension wiring and cable as shown in SAE J878 and SAE J558. In addition, it covers maximum voltage drop limits for friction type connections.
The SAE Recommended Practice covers the application requirements for terminals and splice clips attached to stranded low tension wiring and cable as shown in J878 and J558. In addition, it covers maximum voltage drop limits for friction type connections.
This SAE Standard specifies dimensional characteristics of flat blades of single-pole connectors and specific requirements for on-board electrical harnesses of road vehicles, which can be fitted into female connectors such as those given as in Appendix A. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
This SAE Draft Technical Report specifies dimensional characteristics of flat blades of single-pole connectors and specific requirements for on-board electrical harnesses of road vehicles, which can be fitted into female connectors such as those given as in Appendix A. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.
This SAE Standard specifies dimensional characteristics of flat blades of single-pole connectors and specific requirements for on-board electrical harnesses of road vehicles, which can be fitted into female connectors such as those given as in Appendix A. This document applies to connectors designed to be disconnected after mounting in the vehicle in the case of repair and/or maintenance only.