Search Results

Standard

Low-Temperature Coolant Circuit Nomenclature and Applications

2018-11-08

CURRENT

J3136_201811

The document provides clarity related to multiple temperature coolant circuits used in on- and off-highway, gasoline, and light- to heavy-duty diesel engine cooling systems. Out of scope are the terms and definitions of thermal flow control valves used in either low- or high-temperature coolant circuits. This subject is covered in SAE J3142.

Standard

Exhaust Gas Recirculation (EGR) Cooler Nomenclature and Application

2022-11-22

CURRENT

J2914_202211

This document provides an overview on how and why EGR coolers are utilized, defines commonly used nomenclature, discusses design issues and trade-offs, and identifies common failure modes. The reintroduction of selectively cooled exhaust gas into the combustion chamber is just one component of the emission control strategy for internal combustion (IC) engines, both diesel and gasoline, and is useful in reducing exhaust port emission of nitrogen oxides (NOx). Other means of reducing NOx exhaust port emissions are briefly mentioned, but beyond the scope of this document.

Standard

Exhaust Gas Recirculation (EGR) Cooler Nomenclature and Application

2016-08-23

HISTORICAL

J2914_201608

This document provides an overview on how and why EGR coolers are utilized, defines commonly used nomenclature, discusses design issues and trade-offs, and identifies common failure modes. The reintroduction of exhaust gas into the combustion chamber is just one component of the emission control strategy for internal combustion (IC) engines, both diesel and gasoline, and is useful in reducing exhaust port emission of Nitrogen Oxides (NOx). Other means of reducing NOx exhaust port emissions are briefly mentioned, but beyond the scope of this document.

Standard

Waste Heat Recovery System Thermal Management

2020-02-24

CURRENT

J3173_202002

Waste heat recovery (WHR) systems are used in vehicles and machines powered by internal combustion (IC) engines to capture unused/waste heat and utilize it thereby reducing fuel consumption and emissions by improving efficiency. This information report is a survey of the waste heat recovery methods that include the use of heat exchangers.

Standard

ENGINE CHARGE AIR COOLER NOMENCLATURE

1976-06-01

HISTORICAL

J1148_197606

This recommended practice is intended to outline basic nomenclature and terminology in common use for engine charge air coolers. An ENGINE CHARGE AIR COOLER is a heat exchanger used to cool the charge air of an internal combustion engine after it has been compressed by an exhaust gas driven turbocharger and/or mechanically driven blower. The use of an engine charge air cooler allows increased engine output because of the denser and cooler air available for combustion. Normal cooling sources are the engine’s coolant, a raw water source or air. Engine charge air coolers are often referred to as either INTERCOOLERS or AFTERCOOLERS depending upon their location, relative to the final compression stage, in the air induction system. Nomenclature sketches are presented below for the following general types of engine charge air coolers:

Standard

ENGINE CHARGE AIR COOLER NOMENCLATURE

1984-02-01

HISTORICAL

J1148_198402

This recommended practice is intended to outline basic nomenclature and terminology in common use for engine charge air coolers. An Engine Charge Air Cooler is a heat exchanger used to cool the charge air of an internal combustion engine after it has been compressed by an exhaust gas driven turbocharger and/or mechanically driven blower. The use of an engine charge air cooler allows increased engine output because of the denser and cooler air available for combustion. Normal cooling sources are the engine’s coolant, a raw water source, or air. Engine charge air coolers are often referred to as either Intercoolers or Aftercoolers depending upon their location, relative to the final compression stage, in the air induction system. Nomenclature sketches are presented below for the following general types of engine charge air coolers:

Standard

Engine Charge Air Cooler (CAC) Nomenclature

2004-05-24

HISTORICAL

J1148_200405

This SAE Recommended Practice is intended to outline basic nomenclature and terminology in common use for engine charge air coolers, related charge air cooling system components, and charge air cooling system operational performance parameters.

Standard

ENGINE CHARGE AIR COOLER NOMENCLATURE

1997-03-01

HISTORICAL

J1148_199703

This SAE Recommended Practice is intended to outline basic nomenclature and terminology in common use for engine charge air coolers, related charge air cooling system components, and charge air operating and performance parameters.

Standard

ENGINE CHARGE AIR COOLER NOMENCLATURE

1995-06-01

HISTORICAL

J1148_199506

This SAE Recommended Practice is intended to outline basic nomenclature and terminology in common use for engine charge air coolers, related charge air cooling system components, and charge air operating and performance parameters.

Standard

Oil Cooler Application Testing and Nomenclature

2017-03-21

HISTORICAL

J1468_201703

This SAE Recommended Practice is applicable to oil-to-air and oil-to-coolant oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, engine oil, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results.

Standard

Oil Cooler Application Testing and Nomenclature

2021-12-13

CURRENT

J1468_202112

This SAE Recommended Practice is applicable to oil-to-air and oil-to-coolant oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, engine oil, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results.

Standard

Application Testing of Oil-to-Air Oil Coolers for Heat Transfer Performance

2006-04-17

HISTORICAL

J1468_200604

This SAE Recommended Practice is applicable to oil-to-air oil coolers installed on mobile or stationary equipment. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results. For information regarding application testing of oil-to-water oil coolers for heat transfer performance, see SAE J2414.

Standard

Oil Cooler Application Testing and Nomenclature

2010-10-01

HISTORICAL

J1468_201010

This SAE Recommended Practice is applicable to oil-to-air and oil-to-water oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results.

Standard

Engine Cooling System Field Test (Air-to-Boil)

2009-04-13

CURRENT

J819_200904

This SAE Standard applies to all self-propelled construction and industrial machines using liquid-cooled internal combustion engines.

Standard

REQUIREMENTS FOR ENGINE COOLING SYSTEM FILLING, DEAERATION AND DRAWDOWN TESTS

1989-06-01

HISTORICAL

J1436_198906

Standard

REQUIREMENTS FOR ENGINE COOLING SYSTEM FILLING, DEAERATION, AND DRAWDOWN TESTS

1995-07-01

HISTORICAL

J1436_199507

This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles and industrial applications.

Standard

Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests

2004-07-13

HISTORICAL

J1436_200407

This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles, industrial applications, and automotive applications

Standard

Requirements for Engine Cooling System Filling, Deaeration, and Drawdown Tests

2012-03-20

HISTORICAL

J1436_201203

This SAE Information Report is applicable to all engine cooling systems used in heavy-duty vehicles, industrial applications, and automotive applications

Standard

Radiator Nomenclature

2007-09-11

HISTORICAL

J631_200709

This SAE Standard documents standard nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.

Standard

Radiator Nomenclature

1998-09-01

HISTORICAL

J631_199809

This SAE Standard documents standard nomenclature in common use for various types of radiator and radiator core construction, as well as for various radiator-related accessories.