Search Results

Companies are gradually developing: 1) complex and/or highly integrated systems including vehicles (as satellites, airplanes, cars, etc.) or equipment (as computers, cell phones, no breaks, etc.) to use under 2) increasingly varied or inhospitable environments, and to survive under 3) increasingly long life cycles and unavoidable changes in staff & facilities & technologies. The overall decision to use (by time, cost, quality, of functions, services, etc.) such end systems under 2 require 4) high Dependability (Reliability, Maintainability, Availability, Correction, Safety, Security, etc.) of them. The overall survival in use (by health monitoring, housekeeping, retrofit, upgrade, etc.) of such end systems under 3 require 5) high Suportability (Maintainability, Adaptability, Availability, Robustness, etc.) of them coupled with the support systems.

Complex and/ or highly integrated systems such as satellites, airplanes, air traffic controllers, cars, etc., require Dependability (Reliability, Maintainability, Availability, Safety, Security, etc.) assessments throughout their life cycle, especially in their development, where the time and cost to make changes are smaller. Such systems must achieve high levels of Dependability through a variety of approaches and processes. Among these, the processes of analysis and decision making from the conception phase to the final phase of the detailed project stand out, because in these phases the most important decisions are taken. Thus, the purpose of this article is to present a discussion on detailing processes for improving the Dependability of aerospace and automotive systems.

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well fitted architecture adopted by this trend is the common bus network architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics (sharing bus, delays, jitter,etc) to be considered at design time of a control system. This work focuses on the effect of sharing bus between the control system and the other devices connected to the bus foreigner to control. These last devices are called interferences. We intented to show, through simulations, the influence of sharing bus on real time control systems performance. To compare effects, we choose the CanBus protocol where the medium access control is event driven; and the TTP protocol where the medium access control is time driven.

This work presents the identification of the longitudinal mode of an aircraft by using time and frequency response methods. To do this, the transfer function was identified based on the sampled response to a step input. The transfer function was validated comparing the model step response with the original system step response. The identification of the system transfer function was performed by using the Fast Fourier Transform (FFT) and Bode Graphs methods. The model validation quantification was performed by means of the mean quadratic-error method applied to the step response difference. Based on that, the identified model was considered to be quite representative, thus proving the suitability of the applied methods.

This works presents the generation and customization of real time code for embedded controllers using a modeling and simulation environment. When the controller model is considered satisfactory, the developers can use a code generation tool to build a real time source code capable to be migrated to an embedded target processor. The code generation tool used is capable to generate real time code in ANSI C or ADA 95 languages. This process can be customized to adequate to a target processor and/or a Real Time Operating System (RTOS). The code customization can be achieved using a specific Template Programming Language (TPL) that specifies how the code will be generated. This technique makes it possible the instantiation of real time embedded controllers code using the same controller model to a wide variety of target processors and/or RTOSs.

In this work we present a new procedure for customizing, in the desired format, requirements reports generated by a Requirements Engineering Environment. This environment includes tools for: 1- capturing textual and pictoric requirements; 2- templating requirements documents that can be adjustable to the formats required by the certification authorities or system engineering groups; 3- translating features from/to the main word processors used in the industry (Word, Excel, etc. formats); 4- managing requirements configuration. It provides gains of productivity, correctness, reusability, traceability, coverage, etc, improving the efficiency of the projects. The procedure emphasizes items 2 and 3, and is illustrated with some examples driven from the aerospace industry.

One challenge that the space, aeronautical and automotive industries are facing today is the fast growing number of vehicles versus the slowly growing number of useful orbits, routes, and speedways. Furthermore, the adoption of “free-flight”, “speed-drive”, etc. policies in the near future will only aggravate it. All these factors increase the risk of collisions and the frequency of deviation maneuvers to avoid them. But they also create the opportunity to devise policies to mitigate such problems, including algorithms to propagate the uncertainties in vehicle motions and to predict the risk of their collisions. This work discusses the development and simulation of an algorithm for the propagation of navigation uncertainties in the trajectory of aerospace vehicles, to minimize the risk of collisions. The scenario of Satellites Formation Flying shall be used for the simulations, with focus on the prediction of the collision probability.

This work presents the first part of the analysis, design and simulation of the reconfigurable control architecture for the Multi-Mission Platform (MMP), a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation. The implementation followed the specifications when they were found, otherwise it was designed. The manager block of the control system was implemented as a finite state machine. The tests were based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission.

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well fitted architecture adopted by this trend is the Common Bus Network Architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics (sharing bus, delays, jitter etc.) to be considered at design time of a control system. This work focuses on the influences of data bus protocols on an aircraft Fly-By-Wire (FBW) networked control system. We intent to show, through simulations, the influences of sharing bus on a real time control system. To compare effects, we choose the CAN Bus protocol where the medium access control is event driven; and the TTP protocol where the medium access control is time driven.

In this work we discuss some types of simulation architectures and standards, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity x fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“stand-alone”, PIL, HIL, MIL, DIS, HLA, etc.), their standards (OMBA, SIMNET, ALSP, DIS, HLA 1.3, HLA 1516, ASIA, AP2633, etc.) and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry

This work presents the distributed simulation of the longitudinal mode of an aircraft by using the DoD High Level Architecture (HLA). The HLA is a general-purpose architecture for simulation reuse and interoperability. This architecture was developed under the leadership of the Defense Modeling and Simulation Office (DMSO) to support reuse and interoperability across the large numbers of different types of simulations developed and maintained by the DoD. To do this, the transfer function of the longitudinal mode of a hypothetical aircraft was implemented by means of a SystemBuild/MATRIXx model. The output of this model was connected to a Run-Time Infrastructure (RTI) and monitored on a remote computer. The connection between the model and the RTI was implemented by using a wrapper which was developed in C++. The HLA RTI implementation used in this work was the poRTIco.

Nowadays, given the shrinking budgets and deadlines of the aerospace and automotive industries, the importance and need of the requirements engineering is becoming more and more evident. This means that progressively more users face a difficult task on the different environments of project development: 1) to write better requirements; and 2) to do it faster than ever. It would be nice if they had some tools to help them and abbreviate such a difficult task. This work summarizes the development of a new tool that does exactly that. Its wizard guides the user through the steps necessary to create good requirements when writting a requirements document, depending on the kind of requirements document desired. For example: there are significant differences between user requirements and system requirements documents. The wizard script is composed by a serie of questions related to the parts of the scheme to build a complete and effective requirement.

This paper presents the preliminary results of an "a posteriori" exercise of application of a Requirements Traceability Automation Tool (RT tool) to a set of documents. The documents have been prepared according to established Space System Engineering methodologies and with attention to text quality, but without attention to requirements traceability because the processes and methodologies used during their preparation predates the emergence of the processes and methodologies developed by Requirements Engineering (RE). This study is intended to determine some of the benefits of using a RT tool when compared with the previously used processes and methodologies. The set of documents under scrutiny have been prepared in the frame of the development of the CBERS-3 satellite (China-Brazil Earth Resources Satellite) and is composed of system, subsystem and equipment specification and covering documents related to the Electrical Power Subsystem (EPS) of the satellite.

A major trend in modern aerospace and automotive systems is to integrate computing, communication and control into different levels of the vehicle and/or its supervision. A well-fitted architecture adopted by this trend is the common bus network architecture. A Networked Control System (NCS) is called when the control loop is closed through a communication network. The presence of this communication network introduces new characteristics that must be considered at the design time of a control system. This work, still in development, focuses on a worst case formula for a communication (TDMA) plus computation (RMS) on a NCS. This formula, in a first instance, agrees with the simulated cases under the hypotheses and conditions when the NCS is composed by 1 actuator - 1 sensor and when is composed by 2 actuators - 2 sensors. In the future, we intend to generalize this formula and extend this study to NCS that uses other communication protocols or others computer schedulers.

On several engineering applications high Reliability is one of the most wanted features. The aspects of Reliability play a key role in design projects of aircraft, spacecraft, automotive, medical, bank systems, and so, avoiding loss of life, property, or costly recalls. The highly reliable systems are designed to work continuously, even upon external threats and internal Failures. Very convenient is the fact that the term 'Failure' may have its meaning tailored to the context of interesting, as its general definition refers to it as "any deviation from the specified behavior of a system". The above-mentioned 'deviation' may refer to: performance degradation, operational misbehavior, deviation of environmental qualification levels, Safety hazards, etc. Nevertheless, Reliability is not the only requirement for a modern system. Other features as Availability, Integrity, Security and Safety are always part of the same technical specification, in a same level of importance.

This work presents the analysis, design and simulation of the reconfigurable control architecture for the contingency mode of the MultiMission Platform (MMP). The MMP is a generic service module currently under design at INPE. Its control system can be switched among nine main Modes of Operation and other Sub-Modes, according to ground command or information coming from the control system, mainly alarms. The implementation followed the specifications when they were found, otherwise it was designed. They cover operations from detumbling after launcher separation and solar acquisition, to achieving payload nominal attitude and orbital corrections maneuvers. The manager block of the control system was implemented as a finite state machine. The tests are based in simulations with the MatriX/SystemBuild software. They focused mainly on the worst cases that the satellite is supposed to endure in its mission, be it during modes or transitions between modes and submodes.

Complex systems such as satellites, aircrafts, automobiles and air traffic controls are becoming increasingly complex and highly integrated as prescribed by the SAE ARP 4754 Standard. They integrate many technologies and they work in very demanding environments sometimes with little or no maintenance due to the severe conditions of operation. To survive such harsh operating conditions, they require very high levels of reliability, to be reached by a diversity of approaches, processes, components, etc. By their turn, the processes of analysis and decision making shall be improved progressively, as experience accumulates and suggests modifications and adaptations. According to this philosophy, in this work, we discuss a proposal for improving the results of the Reliability Analysis and FMEA/FMECA of the CBERS Satellite Program, conducted at the National Institute for Space Research-INPE, since 1987.

In this work we discuss some types of simulators and simulations, their characteristics and applications to the simulation and control of aerospace vehicles. This includes: the basic definitions, types and characteristics of simulators and simulations (physical, computational, hybrid, etc.; discrete events, discrete time, continuous time, etc; deterministic, stochastic, etc.) their basic compromise (simplicity × fidelity), their man-machine interfaces and interactions (virtual, constructive, live, etc.), their evolution law (time, events, mixed, etc.), their architectures (“standalone”, PIL, HIL, MIL, DIS, HLA, etc.), their environments (discrete, continuous, hybrid, etc.) and their applications to the simulation and control of aerospace vehicles. This is illustrated by some examples driven from the aerospace industry

Cyber-physical systems are joint instances of growing complexity and high integration of elements in the information and physical domains reaching high levels of difficulty to engineer an operate them. This happens with satellites, aircraft, automobiles, smart grids and others. Current technologies as computation, communication and control integrate those domains to communicate, synchronize and operate together. However, the integration of different domains brings new challenges and adds new issues, mainly in real time distributed control systems, beginning with time synchronization. In this paper, we present a discussion on time synchronization and their effects in distributed cyber-physical control systems. To do that, we review the literature, discuss some time synchronization techniques used in cyber-physical systems, and illustrate them via model and simulation of a system representative of the aerospace area.

Switching controls are those that can switch between control or plant modes to perform their functions. They have the advantage of being simpler to design than an equivalent control system with a single mode. However, the transients between those modes can introduce steps or overshootings in the state variables, and this can degrade the performance or even damage the control or the plant. So, the smoothing of such transients is vital for their reliability and mantainability. This is can be of extreme importance in the aerospace and automotive fields, plenty of switchings between manual and autopilot modes via relays, or among gears via clutches, for example. In this work, we present a first strategy for smoothing transients in switching controls of aerospace and automotive systems.