Refine Your Search

Date

Date

Topic

Topic

Drivetrains Noise Truck and Bus Powertrain Committee Vehicle dynamics Steering systems

Search Results

Viewing 1 to 20 of 21
12Next >Last >>
Sort by relevance
Standard

Heavy Truck and Bus Retarder Downhill Performance Mapping Procedure
2000-05-01
CURRENT
J1489_200005
The procedure covers the estimation of the total retardation capability available to a specific vehicle from: a Natural retardation (rolling resistance, aerodynamic drag, etc). b Engine drag c Engine, integral automatic transmission, driveline or trailer-axle retarders It assumes that foundation brakes are not used for maintaining speed on long mountain descents. Retardation is rated in terms of the maximum grades on which stable control speeds can be maintained for each gear over the range of highway speeds appropriate to that gear. For each gear, the calculation procedure determines maximum grades for at least four values of control speed ranging from the vehicle velocity corresponding to full load governed engine rpm, to the vehicle velocity corresponding to the engine rpm at minimum (idle) speed. In addition, the calculation procedure provides information on the total retarding power available for each gear.
Standard

Axle Efficiency Test Procedure
2001-04-27
CURRENT
J1266_200104
Data from this SAE Recommended Practice permit mapping axle efficiency and/or waste energy over the operating range of trucks, busses, and other highway vehicles based on truck chasses.
Standard

AXLE EFFICIENCY TEST PROCEDURE
1979-06-01
HISTORICAL
J1266_197906
Data from this procedure permits mapping axle efficiency and/or waste energy over the operating range of passenger cars, trucks, busses, and other highway vehicles to which axles are applied.
Standard

AXLE EFFICIENCY TEST PROCEDURE
1990-06-01
HISTORICAL
J1266_199006
Data from this procedure permit mapping axle efficiency and/or waste energy over the operating range of passenger cars, trucks, busses, and other highway vehicles.
Standard

Automotive Pull-Type Clutch Terminology
1999-09-21
HISTORICAL
J1479_199909
This SAE Standard describes the terms or names of the parts, characteristics, and parameters of automotive pull-type clutches used in trucks, and of vehicle apparatus or components related to the pull-type clutch.
Standard

Manual Transmission Efficiency and Parasitic Loss Measurement
2000-11-02
HISTORICAL
J1540_200011
Because of the intense focus on fuel economy and fuel emission standards, it has become imperative to optimize vehicle drivetrains. In light of this, component efficiencies have become an important factor in the drivetrain decision-making process. It has therefore become necessary to develop a universal standard to judge transmission efficiency. This SAE Recommended Practice specifies a test procedure which maps torque transmittal efficiency and parasitic losses for manual transmissions. The application of this document is intended for manual transmissions used in light (class 4) through heavy truck applications with both simple and compound ratio structures. This document is separated into two parts. The first compares input and output torque throughout a specified input speed range in order to determine the overall transmission efficiency. This test is used to evaluate all forward gears; testing in reverse is optional.
Standard

MANUAL TRANSMISSION AND TRANSAXLE EFFICIENCY AND PARASITIC LOSS MEASUREMENT
1992-04-01
HISTORICAL
J1540_199204
Because of the intense focus on CAFE and fuel emission standards, optimization of the automobile drivetrain is imperative. In light of this, component efficiencies have become an important factor in the drivetrain decision-making process. It has therefore become necessary to develop a universal standard to judge transmission efficiency. This SAE Recommended Practice specifies the dynamometer test procedure which maps a manual transmission’s efficiency. The document is separated into two parts. The first compares input and output torque throughout a specified input speed range in order to determine “in-gear” transmission efficiency. The second procedure measures parasitic losses experienced while in neutral at nominal idling speeds. The application of this document is intended for passenger car and light truck. All references to transmissions throughout this document include transaxles.
Standard

Nomenclature and Terminology for Truck and Bus Drive Axles
2001-08-03
HISTORICAL
J923_200108
This SAE Recommended Practice outlines basic nomenclature in common use for truck and bus drive axle designs. Over a period of years there have been many different designs introduced; however, for this report, only the most common have been selected and only their general construction is illustrated to show the nomenclature of the various parts.
Standard

Nomenclature and Terminology for Truck and Bus Drive Axles
2012-07-02
CURRENT
J923_201207
This SAE Recommended Practice outlines basic nomenclature in common use for truck and bus drive axle designs. Over a period of years there have been many different designs introduced; however, for this report, only the most common have been selected and only their general construction is illustrated to show the nomenclature of the various parts.
Standard

NOMENCLATURE AND TERMINOLOGY FOR TRUCK AND BUS DRIVE AXLES
1991-04-01
HISTORICAL
J923_199104
This SAE Recommended Practice outlines basic nomenclature in common use for truck and bus drive axle designs. Over a period of years there have been many different designs introduced; however, for this report, only the most common have been selected and only their general construction is illustrated to show the nomenclature of the various parts.
Standard

Information Relating to Duty Cycles and Average Power Requirements of Truck and Bus Engine Accessories
2000-08-31
CURRENT
J1343_200008
This report is intended to provide the information to estimate the accessory load of a typical heavy truck or bus. The components covered include: air compressors, alternators, refrigerant compressors, engine cooling fans and power steering pumps. The values show an estimate of the average power requirements and duty cycles for these accessories. This report does not address loads required for engine operation. Required systems include those needed for engine performance such as fuel pumps and electronic control modules (ECM).
Standard

Vehicle Idle Gear Rattle Evaluation Procedure
2017-09-19
CURRENT
J2555_201709
This SAE Standard describes a procedure to be used to evaluate a disturbance known as “idle gear rattle” which can exist in vehicles equipped with manual transmissions and clutches. Other types of noises associated with operation at idle are also briefly described.
Standard

Vehicle Idle Gear Rattle Evaluation Procedure
2000-11-01
HISTORICAL
J2555_200011
This SAE Standard describes a procedure to be used to evaluate a disturbance known as “idle gear rattle” which can exist in vehicles equipped with manual transmissions and clutches. Other types of noises associated with operation at idle are also briefly described.
12Next >Last >>
X