Standard
Fluid System Characteristics Affecting Hydraulic Pump Operation
2002-12-16
CURRENT
ARP819
Search Results
Standard
Aircraft Hydraulic Starter/Pumps
2013-10-28
CURRENT
AS838A
This specification established (1) the common requirements for hydraulic units capable of functioning as starters and as pumps suitable for use in aircraft and missiles and (2) the methods to be used for demonstrating compliance with these requirements.
Standard
Aircraft Hydraulic Starter/Pumps
2005-04-26
HISTORICAL
AS838
This specification established (1) the common requirements for hydraulic units capable of functioning as starters and as pumps suitable for use in aircraft and missiles and (2) the methods to be used for demonstrating compliance with these requirements.
Standard
Compressor Units, Air/Gas, General Requirements For
2008-04-09
HISTORICAL
AS26805A
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard
Compressor Units, Air/Gas, General Requirements For
2001-03-01
HISTORICAL
AS26805
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard
Compressor Units, Air/Gas, General Requirements For
2013-06-13
CURRENT
AS26805B
This specification covers the general requirements for the design and construction of air/gas compressor units (see 6.4.1). The detail requirements for a particular air compressor unit shall be as specified in the individual equipment specification for that particular air compressor unit (see 6.2).
Standard
Hydraulic Pump Minimum Inlet Pressure Test
2020-12-10
CURRENT
ARP6249
This SAE Aerospace Recommended Practice (ARP) contains technical information for conducting and evaluating the minimum inlet pressure capability of axial piston pumps.
Standard
Aerospace - Application Guide for Hydraulic Power Transfer Units
2002-07-30
HISTORICAL
ARP1280A
This SAE Aerospace Recommended Practice (ARP) is an application guide for hydraulic power transfer units, and describes the various types, typical design approaches, their operational characteristics and limitations, circuit recommendations, and a tabulation of typical applications. The scope is limited to devices that transfer power between hydraulic systems and do so by means of rotary subassemblies such as hydraulic motors and pumps.
Standard
APPLICATION GUIDE FOR FIXED DISPLACEMENT AIRCRAFT POWER TRANSFER UNITS
1976-03-01
HISTORICAL
ARP1280
This document will be limited in scope to power transfer units made up of two fixed displacement pumps/motors.
Standard
Aerospace - Application Guide for Hydraulic Power Transfer Units
2022-05-23
WIP
ARP1280C
This SAE Aerospace Recommended Practice (ARP) is an application guide for hydraulic power transfer units and describes: The various types Typical design approaches Their operational characteristics and limitations Circuit recommendations Typical applications The scope of this ARP is limited to devices that transfer power between hydraulic systems and do so by means of rotary subassemblies such as hydraulic motors and pumps.
Standard
Aerospace - Application Guide for Hydraulic Power Transfer Units
2014-11-13
CURRENT
ARP1280B
This SAE Aerospace Recommended Practice (ARP) is an application guide for hydraulic power transfer units and describes: The various types Typical design approaches Their operational characteristics and limitations Circuit recommendations Typical applications The scope of this ARP is limited to devices that transfer power between hydraulic systems and do so by means of rotary subassemblies such as hydraulic motors and pumps.
Standard
High Pressure Pneumatic Compressors Users Guide For Aerospace Applications
2007-11-07
HISTORICAL
AIR4994
Gas compressors (air and other compressible fluids) have been used sporadically since the 1940's for various utility functions in aerospace applications. They have been used to provide power to gun purge and drive systems, engine or APU starters (recharge accumulators), reservoir pressurization, cockpit pressurization, braking systems, canopy seals, engine control devices, landing gear activation, and boosted flight controls (see Table 1). In current state-of-the-art aircraft, most pneumatic system power is extracted from a stage of compression in the turbo-jet engine. As more and more demands are put on new generation engines for fuel economy and performance there is an increasing need for a new source of pneumatic power. This document is intended to describe current state-of-the-art technology in compressors, define the limitations, discuss enhancements needed and attempt to predict the needs of the future.
Standard
High Pressure Pneumatic Compressors Users Guide For Aerospace Applications
2013-11-11
CURRENT
AIR4994A
Gas compressors (air and other compressible fluids) have been used sporadically since the 1940's for various utility functions in aerospace applications. They have been used to provide power to gun purge and drive systems, engine or APU starters (recharge accumulators), reservoir pressurization, cockpit pressurization, braking systems, canopy seals, engine control devices, landing gear activation, and boosted flight controls (see Table 1). In current state-of-the-art aircraft, most pneumatic system power is extracted from a stage of compression in the turbo-jet engine. As more and more demands are put on new generation engines for fuel economy and performance there is an increasing need for a new source of pneumatic power. This document is intended to describe current state-of-the-art technology in compressors, define the limitations, discuss enhancements needed and attempt to predict the needs of the future.
Standard
PUMPS, HYDRAULIC, POWER DRIVEN, VARIABLE DELIVERY COMPOSITE OUTLINE DRAWINGS
2000-09-30
AIR45
Outline drawings from all known pump manufacturers for the various size pumps listed in MIL-P-7740 were requested and those received have been combined to make up the various outline drawings. There has been prepared a composite outline drawing enclosing all of the individual outline drawings. Since the pump manufacturers' drawings will change over a period of time and complete detail is not shown, it is not possible to make a detailed mockup of any specific pump. These drawings are intended to provide information concerning the general space requirement for variable delivery pumps, and could be used to manufacture a composite mockup to indicate roughly the space required on a new engine design.
Standard
Aerospace Hydraulic Pump Controls
2011-10-11
HISTORICAL
AIR5872
This Aerospace Information Report presents an overview of the application and control of fixed and variable displacement pumps with the emphasis on the controls most commonly used on variable displacement pumps. It describes various options to control the operation of hydraulic pumps in terms of controlling the pump output pressure and/or flow and assisting in the selection of the pump.
Standard
Aerospace – System Integration Factors That Affect Hydraulic Pump Life
2022-11-18
CURRENT
AIR1922B
This SAE Aerospace Information Report presents the following factors that affect hydraulic pump life and performance: a The need to supply hydraulic fluid at the correct pressure and quality to the pump inlet port b Considerations for the pump output c Factors to be considered for the pump case drain lines d The mounting of the hydraulic pump e Hydraulic fluid properties, including cleanliness
Standard
Aerospace - System Integration Factors That Affect Hydraulic Pump Life
2011-01-03
HISTORICAL
AIR1922A
This AIR presents the following factors that affect hydraulic pump life and performance: a The need to supply hydraulic fluid at the correct pressure and quality to the pump inlet port b Considerations for the pump output c Factors to be considered for the pump case drain lines d The mounting of the hydraulic pump e Hydraulic fluid properties, including cleanliness
Standard
SYSTEM INTEGRATION FACTORS THAT AFFECT HYDRAULIC PUMP LIFE
1995-04-01
HISTORICAL
AIR1922
This SAE Aerospace Information Report (AIR) is to present to hydraulic system designers the salient factors that affect hydraulic piston pump life and performance. It is noted that this document differs in scope from ARP819. ARP819 is a composite checklist of the many variables that affect the pump selection for a particular application.
Standard
Application Guide for Aerospace Hydraulic Motors
2021-11-09
CURRENT
ARP4940A
This SAE Aerospace Recommended Practice (ARP) is an application guide for fixed and variable displacement hydraulic motors. It provides details of the characteristics of fixed and variable displacement hydraulic motors, architectures, circuit designs, controls, and typical applications. The applications include airborne and defense vehicles with emphasis on high performance applications.
Standard
MISSILE HYDRAULIC PUMPS
1992-01-10
HISTORICAL
AIR560B
Missile pumps are categorized by a moderate testing life and a relatively short operational service life. Generally, the pumps are operated at higher speeds, temperatures, and pressures than those used in manned aircraft systems, yet reliability must be extremely high, since there rarely is a redundant system aboard the missile.
