Search Results

Standard

Dynamic Ozone Test Procedure--Hydraulic Brake Hose

1988-06-01

CURRENT

J1914_198803

The purpose of this recommended practice is to evaluate in the laboratory the effect of flexing on a brake hose when exposed to a high ozone concentration environment. This recommended practice is intended for all vehicle hydraulic brake hoses. It is an accelerated test which subjects the hose to dynamic ozone exposure.

Standard

AUTOMOTIVE HYDRAULIC BRAKE SYSTEM—METRIC BANJO BOLT CONNECTIONS

1980-07-01

HISTORICAL

J1291_198007

This recommended practice documents dimensional metric specifications for hydraulic brake system threaded ports and banjo bolts for the interconnection of major components in automotive hydraulic brake systems. Banjo blocks are not covered by this recommended practice. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

Automotive Hydraulic Brake System - Metric Banjo Bolt Connections

2011-12-12

CURRENT

J1291_201112

This SAE Standard documents dimensional metric specifications for hydraulic brake system threaded ports and banjo bolts for the interconnection of major components in automotive hydraulic brake systems. Banjo blocks are not covered by this document. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

Automotive Hydraulic Brake System—Metric Banjo Bolt Connections

2002-10-31

HISTORICAL

J1291_200210

This SAE Standard documents dimensional metric specifications for hydraulic brake system threaded ports and banjo bolts for the interconnection of major components in automotive hydraulic brake systems. Banjo blocks are not covered by this document. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

POWER STEERING PRESSURE HOSE – LOW VOLUMETRIC EXPANSION TYPE

1970-08-01

HISTORICAL

J191_197008

The specification covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications at pressures as indicated in Table 1, as flexible connections within the temperature range of –40 C (–40 F) to 121 C (250 F) average, 149 C (300 F) maximum peaks. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is not required.

Standard

POWER STEERING PRESSURE HOSE—WIRE BRAID

1970-08-01

HISTORICAL

J190_197008

This specification covers hose fabricated from wire braid and synthetic rubber, assembled with end fittings for use in automotive applications up to 1500 psi maximum pressure, as flexible connections Within the temperature range of –40 to +121 C (–40 to +250 F) average, 149C (300 F) maximum peaks.

Standard

Moisture Transmission Test Procedure - Hydraulic Brake Hose Assemblies

2012-02-16

CURRENT

J1873_201202

This SAE Recommended Practice is intended for all vehicle hydraulic brake hoses. It is an accelerated test which is intended to provide the user with a method of comparing the ability of hydraulic brake hose designs to retard the ingress of moisture into brake fluid. This document specifies a laboratory performance requirement. ASTM D 1364 interlaboratory reproducibility and correlation of data have not been defined, nor has correlation been established between field vehicle brake fluid moisture content and data obtained by this document.

Standard

Moisture Transmission Test Procedure--Hydraulic Brake Hose Assemblies

2019-05-14

WIP

J1873

This SAE Recommended Practice is intended for all vehicle hydraulic brake hoses. It is an accelerated test which is intended to provide the user with a method of comparing the ability of hydraulic brake hose designs to retard the ingress of moisture into brake fluid. This document specifies a laboratory performance requirement. ASTM D 1364 interlaboratory reproducibility and correlation of data have not been defined, nor has correlation been established between field vehicle brake fluid moisture content and data obtained by this document.

Standard

RUBBER SEALS FOR HYDRAULIC DISC BRAKE CYLINDERS

1995-01-10

HISTORICAL

J1603_199501

This SAE Standard describes the performance and part requirements for elastomeric seals used in highway vehicle disc brake calipers. Seals covered by this specification may be the solid section type (square, rectangular, O-ring, etc.) mounted stationary in the cylinder bore or on the movable piston.

Standard

POWER STEERING PRESSURE HOSE — HIGH VOLUMETRIC EXPANSION TYPE

1970-08-01

HISTORICAL

J188_197008

This specification covers two types of hose fabricated from fabric braid and synthetic rubber, assembled with end fittings for use in automotive power steering applications as flexible connections within the temperature range of –40 to +121 C (–40 to +250 F) average, + 149 C (+ 300 F) maximum peaks. These hoses are intended for use in applications where reduction in amplitude of pump pressure pulsations is required. Type 1 hose shall be suitable for 1500 psi maximum working pressure. Type 2 hose shall be suitable for 1300 psi maximum working pressure.

Standard

Application of Hydraulic Brake Hose to Motor Vehicles - Wheel End and Axle

2017-07-27

WIP

J1406

This SAE Recommended Practice covers the application of hydraulic brake hose (as defined by current issue of SAE J1401) as used to provide a flexible hydraulic connection between wheel end or axle brake system components on motor vehicles. The purpose of this document is to outline design, operating, and service factors in routing a hydraulic brake hose assembly to a vehicle. It is intended to serve as a recommended practice for original equipment manufacturers. Vehicle design circumstances may exist that prevent strict adherence to this document. Any deviations should have the concurrence of all engineering functions involved.

Standard

Automotive Hydraulic Brake System—Metric Tube Connections

2002-10-31

HISTORICAL

J1290_200210

This SAE Standard documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038. Some applications may require sizes of forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

AUTOMOTIVE HYDRAULIC BRAKE SYSTEM—METRIC TUBE CONNECTIONS

1980-07-01

HISTORICAL

J1290_198007

This recommended practice documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038-1977 (E). Some applications may require sizes or forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

Automotive Hydraulic Brake System - Metric Tube Connections

2012-07-05

CURRENT

J1290_201207

This SAE Standard documents dimensional metric specifications for hydraulic brake system tubing with flared ends, threaded ports, and male tube nuts for the interconnection of major components in automotive hydraulic brake systems. The purpose of this document is to recommend preferred metrically dimensioned components (including alternative choices), that are intended to be functionally compatible with International Organization for Standardization Specification, ISO 4038. Some applications may require sizes of forms other than those shown herein, and this document does not preclude such other details when they are required.

Standard

POWER STEERING RETURN HOSE – LOW PRESSURE

1970-08-01

HISTORICAL

J189_197008

This specification covers hose fabricated from fabric braid and synthetic rubber, assembled with end fittings or user applied clamps for use in automotive power steering applications as flexible connections within the temperature range of –40 C ( – 40 F) to +121 C ( + 250 F) average, 149 C (300 F) maximum peaks. Hose assemblies shall be suitable for 250 psi maximum working pressure with end fittings and 100 psi maximum working pressure with user applied clamps.

Standard

Road Vehicle - Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids

2013-02-05

CURRENT

J1401_201302

This SAE Standard specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a road vehicle. It also specifies the methods used for identification of the hose manufacturer. This document applies to brake hose assemblies made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with nonpetroleum-base brake fluids as specified in SAE J1703, SAE J1704 and SAE J1705. The nominal internal diameter of the brake hose shall fall within one of the following values: a less than 4 mm (1/8 in or less) b 4 to 5 mm (3/16 in)

Standard

Road Vehicle - Hydraulic Brake Hose Assemblies for Use With Nonpetroleum-Base Hydraulic Fluids

2016-08-17

WIP

J1401

This SAE Standard specifies the performance tests and requirements for hydraulic brake hose assemblies used in the hydraulic braking system of a road vehicle. It also specifies the methods used for identification of the hose manufacturer.

This document applies to brake hose assemblies made of a hose fabricated from yarn and natural or synthetic elastomers and assembled with metal end fittings for use with nonpetroleum-base brake fluids as specified in SAE J1703, SAE J1704 and SAE J1705.

The nominal internal diameter of the brake hose shall fall within one of the following values:

a. less than 4 mm (1/8 in or less)
b. 4 to 5 mm (3/16 in)